Non-Destructive Moisture Meters
T660 Material Moisture Measuring Device - IC-T660
Product code: IC-T660
Professional hand-held measuring device for the quick, non-destructive determination of moisture distributions in near-surface areas
$609.55
AUD + GST
$670.51
AUD Inc. GST
1 in stock
Hydromette Compact A Moisture Meter - IC-2020
Product code: IC-2020
The Hydromette Compact A is used to measure finished hardwood flooring materials. - Measures materials 1.5 inch thick. - Readings are in % of moisture content with different settings for different species of wood. - Doesn't require cables or electrodes. This meter is normally priced at $599+GST!
$499.00
AUD + GST
$548.90
AUD Inc. GST
2 in stock
ME5 Moisture Encounter
Product code: ME5
The Tramex Moisture Encounter is a moisture meter that can measure moisture at both deep and shallow depths, up to 30mm and 10mm respectively. Five levels of sensitivity for different materials and has a wide range of readings from 5% to 30% (Wood Scale) and 0 to 100 (comparative scale for all other materials). Non-destructive tool for instant moisture measurement and evaluation. Suitable for measuring moisture in wood and timber, shallow depth materials, drywall and roofing, plaster and tile, and masonry.
$831.818
AUD + GST
$915.00
AUD Inc. GST
10 in stock
Protimeter Mini - IC-BLD2000
Product code: IC-BLD2000
The Protimeter Mini can be used for making rapid moisture assessments in a wide range of building materials including wood, masonry, drywall, plaster and concrete. The instrument measuring pins are small and sharp which means measurements can be taken at the surface with virtually no mark left behind.
$349.86
AUD + GST
$384.85
AUD Inc. GST
1 in stock
Tramex Concrete Moisture Encounter - CME5
Product code: CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds.
$931.818
AUD + GST
$1,025.00
AUD Inc. GST
2 in stock
Tramex Concrete Moisture Encounter X5 - CMEX5
Product code: CMEX5
The Tramex Concrete Moisture Encounter X5 – CMEX5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing an instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.
$1,309.09
AUD + GST
$1,440.00
AUD Inc. GST
2 in stock
Skipper 5 Moisture Meter - SMM5
Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$868.181
AUD + GST
$955.00
AUD Inc. GST
1 in stock
Imaging Moisture Meter - IC-MR176
Product code: IC-MR176
The FLIR MR176 Imaging Moisture Meter Plus with IGM technology is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture.
$1,595.00
AUD + GST
$1,754.50
AUD Inc. GST
1 in stock
Flir MR160 Imaging Moisture Meter Thermal Camera - IC-MR160
Product code: IC-MR160
The FLIR MR160 features IGM technology powere by FLIR Lepton thermal imaging sensor to quickly and accurately identify different temperature patterns to identify problem areas.
$995.00
AUD + GST
$1,094.50
AUD Inc. GST
Protimeter Digital Mini - IC-BLD5702
Product code: IC-BLD5702
The BLD5702 Digital Mini is a pin type, moisture meter to help assess the moisture levels of building materials for constuction, restoration or repair. It has a pin-type measurement function, displays measurements on a large LED screen.
$409.57
AUD + GST
$450.53
AUD Inc. GST
PROTIMETER Aquant RF Moisture Meter - IC-BLD5765
Product code: IC-BLD5765
The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with a RF measurement system unique to Protimeter. This system allows you to detect moisture up to ¾” (19mm) below and behind the surface in the most efficient way possible
$569.11
AUD + GST
$626.02
AUD Inc. GST
1 in stock
Moisture Encounter MEX5
Product code: MEX5
The Tramex Moisture Encounter MEX5 is a digital Dual-Depth, non-destructive moisture and humidity meter, ideal for surveying moisture and humidity conditions in building structures. Measures moisture content on wood and drywall. Can also be used to make comparative readings in roofing, plaster, tile and masonry. Features dual-depth measuring range comparing both deep and shallow penetration readings. Has a built in hygrometer and infrared surface thermometer for monitoring ambient conditions.
$1,381.818
AUD + GST
$1,520.00
AUD Inc. GST
Gann CH17 Moisture Detection Expert Kit #1 - IC-KIT-GA-CH17
Product code: IC-KIT-GA-CH17
The Gann CH17 Expert Kit is our most comprehensive kit in the Gann range for measuring a multitude of situations in restoration jobs such as measurements of structural moisture, wood moisture, surface temperature, material temperature and air temperature/humidity. It contains one multifunctional measuring device, sensors, probes, cables, electrodes and pins to suit any situation. The Gann CH 17 is a multifunctional measuring instrument for measuring wood moisture, building moisture and air humidity as well as temperature and air velocity. Includes accessories needed for non-destructive moisture measurement for building materials (e.g. screeds, mortars, plasters, concrete, bricks, thermal insulating materials).
$4,500.00
AUD + GST
$4,950.00
AUD Inc. GST
Gann 3 in 1 Moisture Detection Technician Kit #3
Product code: IC-KIT-GA-3IN1
The Gann Technician 3-in-1 Moisture Detection Kit is an ideal restoration starter kit for structural moisture measurements, wood moisture measurements and air temperature/humidity measurements. Includes Gann BL Compact B2 Structural Moisture Meter, BL Compact TF-IR 2 Climate and Infrared Measuring Device and BL H 40 Wood Moisture Meter.
$2,100.00
AUD + GST
$2,310.00
AUD Inc. GST
T-C-20 Cementometer Type L
Product code: T-C-20
The James Instruments Cementometer Type L, is used to determine the moisture content of freshly mixed cement, concrete, and mortar. -Fast and easy to use; simply insert the prongs into the material being tested. -Accurate and completely portable. -Appropriate for materials that are expected to have low water cement ratio.
$5,636.00
AUD + GST
$6,199.60
AUD Inc. GST
T-C-10 Cementometer Type R
Product code: T-C-10
The James Instruments Cementometer Type R, is used to determine the moisture content of freshly mixed cement, concrete, and mortar. -Fast and easy to use; simply insert the prongs into the material being tested. -Accurate and completely portable. -Appropriate for materials that are expected to have normal water cement ratio.
$5,636.00
AUD + GST
$6,199.60
AUD Inc. GST
Flir MR77-in-1 Moisture Meter with METERLiNK
Product code: MR77
The FLIR MR77 is a 5-in-one moisture meter that also measures temperature, relative humidity and IR thermometer. -Measures moisture either through the pinless sensor or pin-type probe. -Share data wirelessly through Bluetooth. -Shock resistant with a double-molded, rubberized case.
$1,100.00
AUD + GST
$1,210.00
AUD Inc. GST
TROTEC BM22WP Material Moisture Measuring Device
Product code: BM22WP
The appSensor BM22WP is an electronic moisture indicator permitting measurements of wood and building moisture according to the resistance measuring method when used in combination with the MultiMeasure Mobile app. The measuring device BM22WP is immediately ready for use, it can be connected to the app without the slightest effort and permits the quick and easy detection of near-surface moisture in different materials.
$120.00
AUD + GST
$132.00
AUD Inc. GST
1 in stock
RWS Roof and Wall Scanner - RWS
Product code: RWS
A Multi-Mode, Hand Held, Non-Destructive Moisture Detection instrument for Deep Moisture Scanning, Surveying, and Leak Tracing in the building envelope.
$2,309.09
AUD + GST
$2,540.00
AUD Inc. GST
Hydromette Compact LB - IC-2070
Product code: IC-2070
The Compact LB is an electronic structural moisture indicator that uses non-destructive dielectric constant measuring or high frequency measuring method using a universally applicable ball sensor. The Compact LB is addionally equipped with an extendible telescope sensor (length 80 - 120 cm) which enables a quick an comfortable scanning of the components to be tested.
Hydromette Compact B - IC-2030
Product code: IC-2030
The Hydromette Compact B is equipped with a digital LCD and a universally applicable ball sensor for a non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, ceilings, floor finish, and other set building materials.
Hydromette BL Compact B2 - IC-12030
Product code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
Flir MR60 Moisture Meter Pro - IC-MR60
Product code: IC-MR60
The FLIR MR60 Moisture Meter Pro is an easy-to-use pin and pinless moisture meter with advanced functionality.
$650.00
AUD + GST
$715.00
AUD Inc. GST
Gann BL Uni 11 Moisture Detection Restorers Kit #2 - IC-KIT-GA-BL
Product code: IC-KIT-GA-BL
The Gann BL Uni II Moisture Detection Kit is the next step up for measuring a range of situations in restoration jobs such as measurements of structural moisture, wood moisture, surface temperature, material temperature and air temperature/humidity. Contains two moisture measuring devices and a range of accessories.
$3,150.00
AUD + GST
$3,465.00
AUD Inc. GST
Digital Concrete Moisture Meter - IC-CMEX2
Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
Digital Non-Destructive Moisture Meter - MRH3
Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control