Building Material & Timber Moisture Meters

Per page:  
Display:  

Product code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
$450.00 AUD + GST
$495.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-MEP
Building moisture inspection tool without causing any damage. - Non-destructive moisture measurements - Wood/timber, drywall/roofing & plaster/brick - Exclusive extra 1 year warranty!
$581.82 AUD + GST
$640.00 AUD Inc. GST
in stock icon
62 in stock info icon
each

Product code: IC-850002
Accurately reads elevated moisture content using cutting-edge electromagnetic wave technology that penetrates 0.25 inch through most materials.
$225.00 AUD + GST
$247.50 AUD Inc. GST
in stock icon
4 in stock info icon
each

Product code: IC-12010
The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building and insulating materials up to 25 mm in thickness.
$376.00 AUD + GST
$413.60 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!
$686.36 AUD + GST
$755.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: 0560-6060
Moisture meter displays in percent by weight using stored material characteristic curves. - For wood and building materials - Pin type mositure meter - Calibration protocol included
$153.00 AUD + GST
$168.30 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
$827.27 AUD + GST
$910.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: T510
The T510 is a professional hand-held measuring device for the exact determination of wood and material moisture content according to the resistance measuring method. - Wood & material moisture with one device - Auto-calibration function
$400.00 AUD + GST
$440.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
$900.00 AUD + GST
$990.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: ME5
The Tramex Moisture Encounter is a Dual-Depth, non-destructive moisture meter for instant moisture measurement and evaluation. Deep Depth penetration up to 1.25 inches (30mm) and Shallow Depth penetration up to 0.40 inches (10mm).
$713.64 AUD + GST
$785.00 AUD Inc. GST
in stock icon
4 in stock info icon
each

Product code: 0560-6062
In addition to material moisture, testo 606-2 also measures air humidity and temperature. - Measures a wide variety of materials - Stored characteristic curves - Includes wrist strap and belt holder
$278.00 AUD + GST
$305.80 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-850001
Accurately reads elevated moisture content in various materials for use in building inspection and other industries. Seven material group settings cover various woods, cement, concrete, mortar, plaster, and brick.
$148.00 AUD + GST
$162.80 AUD Inc. GST
in stock icon
3 in stock info icon
each

Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$727.27 AUD + GST
$800.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
$850.00 AUD + GST
$935.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-4 business days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: CZK5.5
A compact kit for testing moisture in concrete per ASTM F2659 & ASTM F2170 featuring the Tramex CMEX5 moisture meter and Tramex Hygro-i2® relative humidity probes. The Concrete Inspection EZ Kit comes in a protective Tramex Easy-travel case. With 2 Year Extended Warranty!
$1,754.55 AUD + GST
$1,930.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: FMK
Ultimate moisture meter kit for measuring moisture content, relative humidity and dew-point of concrete floors and slabs for flooring installation and inspection with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -Plug-in reusable Tramex Hygro-I2 RH probes for relative humidity readings in concrete slabs and heavy-duty wood pin-probe for measuring wood moisture.
$3,636.36 AUD + GST
$4,000.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: IC-PCK5.1
A complete moisture and humidity testing kit for the Pest Control Professionals. Includes MRH III Moisture and Humidity Meter and Hygro-i Relative Humidity probe.
$1,404.55 AUD + GST
$1,545.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: PTMMK5.1
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials.
$1,045.45 AUD + GST
$1,150.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: WDIK
Complete moisture meter kit for water damage restoration of buildings and building materials with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -The Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe.
$3,000.00 AUD + GST
$3,300.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: WDMK
Ultimate moisture meter kit for water damage restoration of buildings and building materials with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -Hygro-i2® Relative Humidity probe, heavy duty pins and insulated pins for wood moisture content.
$3,590.91 AUD + GST
$3,950.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: FZK5.2
A compact kit for instant and precise moisture testing of wood flooring, concrete and other floor screeds. -Includes the Tramex CMEX II digital moisture meter for non-invasive testing of concrete. -Comes with Hygro-i2 ® relative humidity probe for testing relative humidity, temperature and dew point in the environment.
$1,672.73 AUD + GST
$1,840.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: FTK
Compact moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for flooring installation with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -The Tramex Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in The environment.
$1,309.09 AUD + GST
$1,440.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: FIK
Complete moisture meter kit for measuring moisture content, relative humidity and dew-point of concrete floors and slabs for flooring with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -Plug-in reusable Tramex Hygro-I2 RH probes for relative humidity readings in concrete slabs and heavy-duty wood pin-probe for measuring wood moisture. -An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer.
$2,000.00 AUD + GST
$2,200.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: CCTK
Compact Moisture Meter Kit For Measuring Moisture Content And Dew-point Of Concrete Floors And Slabs For Coatings Application with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -THe Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe. -The Tramex Contact Temperature Probe provides temperature readings of the floor surface.
$1,254.54 AUD + GST
$1,379.99 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: CCIK
Complete moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for coatings application with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 built-in hygrometer.
$1,445.45 AUD + GST
$1,590.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: BSIZK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe.
$1,281.82 AUD + GST
$1,410.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: BSIK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe. -Infrared surface thermometer.
$1,772.73 AUD + GST
$1,950.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: BSMK5.1
Ultimate moisture meter kit for moisture and humidity surveying of buildings and building materials. Includes: -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -An Ambient Relative Humidity Hygro-i2 Short Probe and a heavy-duty pin-type wood probe.
$3,409.10 AUD + GST
$3,750.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: RIK
Non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -Hand held electrode with 200mm insulated pins and 260mm narrow RH probe.
$4,363.64 AUD + GST
$4,800.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: RMK
Master kit centered on a non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: - The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex Roof Master Kit is used to perform ASTM D7954. - The Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing.
$13,272.73 AUD + GST
$14,600.00 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 964 137 (NZ 0800600167) to confirm.
each