Non-Destructive Moisture Meters

Per page:  
Display:  

Product code: ME5
The Tramex Moisture Encounter is a moisture meter that can measure moisture at both deep and shallow depths, up to 30mm and 10mm respectively. Five levels of sensitivity for different materials and has a wide range of readings from 5% to 30% (Wood Scale) and 0 to 100 (comparative scale for all other materials). Non-destructive tool for instant moisture measurement and evaluation. Suitable for measuring moisture in wood and timber, shallow depth materials, drywall and roofing, plaster and tile, and masonry.
$831.818 AUD + GST
$915.00 AUD Inc. GST
in stock icon
3 in stock info icon
each

Product code: IC-2020
The Hydromette Compact A is used to measure finished hardwood flooring materials. - Measures materials 1.5 inch thick. - Readings are in % of moisture content with different settings for different species of wood. - Doesn't require cables or electrodes. This meter is normally priced at $599+GST!
$499.00 AUD + GST
$548.90 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: IC-850002
Accurately reads elevated moisture content using cutting-edge electromagnetic wave technology that penetrates 0.25 inch through most materials.
$339.70 AUD + GST
$373.67 AUD Inc. GST
in stock icon
3 in stock info icon
each

Product code: IC-BLD2000
The Protimeter Mini can be used for making rapid moisture assessments in a wide range of building materials including wood, masonry, drywall, plaster and concrete. The instrument measuring pins are small and sharp which means measurements can be taken at the surface with virtually no mark left behind.
$379.00 AUD + GST
$416.90 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: CMEX5
The Tramex Concrete Moisture Encounter X5 – CMEX5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing an instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.
$1,309.09 AUD + GST
$1,440.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 11th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds.
$931.818 AUD + GST
$1,025.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: BLD5777
The ReachMaster Pro moisture meter makes moisture inspections easier with customized surveying options depending on the material inspected and a telescoping handle to measure hard-to-reach places. -Pinless moisture meter that can take readings from a surface to a nominal depth of 12.5 cm. -T elescoping handle extends the meter's reach up to 122 cm. -Can be used on wood, drywall, concrete, fiberglass and Brick/Masonry surfaces.
$1,159.80 AUD + GST
$1,275.78 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 8th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$868.181 AUD + GST
$955.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
$1,409.00 AUD + GST
$1,549.90 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MR176
The FLIR MR176 Imaging Moisture Meter Plus with IGM technology is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture.
$1,595.00 AUD + GST
$1,754.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 27th of December 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MR160
The FLIR MR160 features IGM technology powere by FLIR Lepton thermal imaging sensor to quickly and accurately identify different temperature patterns to identify problem areas.
$995.00 AUD + GST
$1,094.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 11th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: MEX5
The Tramex Moisture Encounter MEX5 is a digital Dual-Depth, non-destructive moisture and humidity meter, ideal for surveying moisture and humidity conditions in building structures. Measures moisture content on wood and drywall. Can also be used to make comparative readings in roofing, plaster, tile and masonry. Features dual-depth measuring range comparing both deep and shallow penetration readings. Has a built in hygrometer and infrared surface thermometer for monitoring ambient conditions.
$1,381.818 AUD + GST
$1,520.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 29th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-BLD2001
The Protimeter Mini C is a low cost, highly durable moisture meter designed specifically for the wood floor installation industry. The Protimeter Mini C is a pin type moisture meter that displays instant moisture content results on its 6 to 30% LED scale.
$289.40 AUD + GST
$318.34 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 28th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-BLD5775
The new Digital Mini boasts advanced pin moisture measurement technology and numerous enhancements, including a larger, more user-friendly display and an integrated calibration check with 3 times longer battery life. Pin-type moisture meter with Bluetooth. Connect to the Protimeter Connect App to live stream data, setup jobs, record and email readings. Identify any at-risk areas at a glance thanks to color coded notifications shown through the vivid-color display (green, yellow, and red markers). Compatible with the wide range of Protimeter plug in attachments to expand its utility.
$499.90 AUD + GST
$549.89 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 28th of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: BM31WP
The appSensor BM31WP is an electronic moisture indicator that enables you to capacitive determine moisture on the close to surface of wall, ground or ceiling non-destructively in combination with MultiMeasure Mobile App.
$279.50 AUD + GST
$307.45 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 21st of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
$965.00 AUD + GST
$1,061.50 AUD Inc. GST
in stock icon
Unfortunately, the CMEX2 has been discontinued and has been replaced by the CMEX5 .
each

Product code: IC-BLD5765
The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with a RF measurement system unique to Protimeter. This system allows you to detect moisture up to ¾” (19mm) below and behind the surface in the most efficient way possible
$659.10 AUD + GST
$725.01 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-KIT-GA-CH17
The Gann CH17 Expert Kit is our most comprehensive kit in the Gann range for measuring a multitude of situations in restoration jobs such as measurements of structural moisture, wood moisture, surface temperature, material temperature and air temperature/humidity. It contains one multifunctional measuring device, sensors, probes, cables, electrodes and pins to suit any situation. The Gann CH 17 is a multifunctional measuring instrument for measuring wood moisture, building moisture and air humidity as well as temperature and air velocity. Includes accessories needed for non-destructive moisture measurement for building materials (e.g. screeds, mortars, plasters, concrete, bricks, thermal insulating materials).
$4,500.00 AUD + GST
$4,950.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 1st of December 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-KIT-GA-3IN1
The Gann Technician 3-in-1 Moisture Detection Kit is an ideal restoration starter kit for structural moisture measurements, wood moisture measurements and air temperature/humidity measurements. Includes Gann BL Compact B2 Structural Moisture Meter, BL Compact TF-IR 2 Climate and Infrared Measuring Device and BL H 40 Wood Moisture Meter.
$2,100.00 AUD + GST
$2,310.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 1st of December 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: T-C-20
The James Instruments Cementometer Type L, is used to determine the moisture content of freshly mixed cement, concrete, and mortar. -Fast and easy to use; simply insert the prongs into the material being tested. -Accurate and completely portable. -Appropriate for materials that are expected to have low water cement ratio.
$5,636.00 AUD + GST
$6,199.60 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: T-C-10
The James Instruments Cementometer Type R, is used to determine the moisture content of freshly mixed cement, concrete, and mortar. -Fast and easy to use; simply insert the prongs into the material being tested. -Accurate and completely portable. -Appropriate for materials that are expected to have normal water cement ratio.
$5,636.00 AUD + GST
$6,199.60 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: PCE-WMT-200
The PCE-WMT 200 is moisture meter with ram electrode for wood and timber. Select the the type of wood to be measured via an Android or iOS device and the measurement will display in seconds. -Measures u p to 150% moisture. -Compatible with 44 types of wood such as beech, spruce, pine and maple. -Built with Bluetooth 4.0 interface.
$1,249.50 AUD + GST
$1,374.45 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: PCE-MMK-1
The PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction environmental meter also measures ambient temperature and ambient relative humidity.
$919.20 AUD + GST
$1,011.12 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: MR77
The FLIR MR77 is a 5-in-one moisture meter that also measures temperature, relative humidity and IR thermometer. -Measures moisture either through the pinless sensor or pin-type probe. -Share data wirelessly through Bluetooth. -Shock resistant with a double-molded, rubberized case.
$1,100.00 AUD + GST
$1,210.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: BM22WP
The appSensor BM22WP is an electronic moisture indicator permitting measurements of wood and building moisture according to the resistance measuring method when used in combination with the MultiMeasure Mobile app. The measuring device BM22WP is immediately ready for use, it can be connected to the app without the slightest effort and permits the quick and easy detection of near-surface moisture in different materials.
$120.00 AUD + GST
$132.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-humimeterWLW
Woosd moisture meter with higher measuring range (up to 150% wood moisture) for professional applications such as sawmills, carpentries and timber construction companies. Measuring probe not included. Requires IC-12630, sold separately.
$1,159.30 AUD + GST
$1,275.23 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 22nd of November 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-humimeterRH6
Paper moisture meter for piles of paper. Also ideal for automatically monitoring the climate of printing rooms and paper stockrooms. Also features absolute humidity measurement and calibration curves.