Water Quality Process Instrumentation

Per page:  
Display:  

Product code: MC122
The Milwaukee MC122 PRO pH controller automatically measures and adjust pH levels based on your required pH parameters. -Automatically monitors and fine-tunes the pH level based on your desired range. -Accurate up to +/- 0.2 pH with two point manual calibration. -Common uses are nutrient tanks and aquariums.
$255.90 AUD + GST
$281.49 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC310
The MC310 is a conductivity monitor pH, EC or TDS. -User selectable Hi/Low Set Point with visual alarm. -Features manual, 1-point calibration and automatic temperature compensation. -Supplied with 12 VDC adapter and 20ml 5000 ┬ÁS/cm calibration solution.
$198.39 AUD + GST
$218.23 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: MC311
Electroconductivity controller to monitor and and control electro conductivity with visual alarm. -User selectable Hi/Low set point that triggers a notification light on the LED screen. -Supplied with 12 VDC adapter, mounting kit and EC probe.
$323.70 AUD + GST
$356.07 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC410
The MC410 TDS Monitor continuouslys monitor TDS directly in your reservoir. -User selectable Hi/Low Set Point with visual alarm. -Includes TDS probe. -Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution.
$198.39 AUD + GST
$218.23 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC740
The MC311 EC controller with dosing pump (MP810) provides fully automated EC control of aqueous solutions in hydroponic systems. -Small and precise, specifically designed for mixing tanks used for fertilization. -Automatically adds the right amount of fertilization based on the set EC value.
$484.45 AUD + GST
$532.90 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC125
The Milwaukee MC125 PRO pH and ORP controller automatically measures and adjust pH and ORP levels based on your required parameters. -Automatically monitors and fine-tunes pH and ORP levels based on your desired range. -Accurate up to +/- 0.2 pH with two point manual calibration. -Common uses are nutrient tanks, aquariums, pools, and spas.
$374.93 AUD + GST
$412.42 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC510
The Milwaukee MC510 PRO ORP controller automatically measures and adjust ORP levels based on your required parameters. -Automatically monitors and fine-tunes the ORP level based on your desired range. -Accurate up to +/- 5 mV with two point manual calibration. -Common uses are nutrient tanks, aquariums, pools, spas and other water quality monitoring uses.
$268.49 AUD + GST
$295.34 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: MC720
The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems. - Composed of the MC122 pH controller and the MP810 dosing pump. -Automatically measures the pH and makes adjustments based on the selected user-settings. -Designed to control the pH in mixing tanks for fertilization.
$424.18 AUD + GST
$466.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 4-6 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm.
each

Product code: IC-3679N
1/4 DIN panel mount pH/ORP controller/transmitter in a waterproof IP-65 enclosure. Features, LCD display, dual SPDT Hi/Lo relays, manual set point adjust and pH calibration via potentiometers.
$866.00 AUD + GST
$952.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6TX
Water/dust resistant, scalable 12 to 36 VDC loop powered 4-20 mA transmitter with LCD display, automatic buffer recognition and isolated and reversible 4-20 mA current output for pH or ORP.
$1,305.00 AUD + GST
$1,435.50 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3671N
1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch.
$616.00 AUD + GST
$677.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6308PT
Jenco's most popular pH analyzer, monitor, controller and transmitter with RS-485 and relays.
$1,305.00 AUD + GST
$1,435.50 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6312PTB
pH/mV analyzer, dual current isolated reversible transmitters, RS-485, relays 2 high, 1 low and 1 temp.
$1,556.00 AUD + GST
$1,711.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3631
Menu driven, sealed, backlit, pH/mV monitor/transmitter with an isolated and reversible 4-20mA current output for pH and mV. Tinned lead connectors.
$590.00 AUD + GST
$649.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3621
Menu driven, sealed, backlit, pH/mV monitor/controller with 2 relays and tinned lead connectors.
$540.00 AUD + GST
$594.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6313
Intuitive pH or mV controller and transmitter in a 1/4 DIN IP-65 case with 2 on/off control relays.
$803.00 AUD + GST
$883.30 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6309POT
pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID?s. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.
$1,856.00 AUD + GST
$2,041.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6311
pH or mV analyzer, controller, 4-20 mA transmitter, RS-485, 4 on/off relays and 1 temp. relay.
$1,031.00 AUD + GST
$1,134.10 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3676
1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch.
$816.00 AUD + GST
$897.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3675
1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch.
$817.00 AUD + GST
$898.70 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6309PDT
pH, Dissolved Oxygen, Temperature In-line Analyzer. 1/4 DIN, IP65, panel mount pH/DO/Temp analyzer with 2 wire 4-20mA current output, 2 sets of programmable on/off relay, RS485 output and backlight.
$1,680.00 AUD + GST
$1,848.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-pH3900
Industrial 2-wire pH transmitter with an isolated 4- 20 mA current output with an LCD display for pH. Designed for pH electrodes with a built in RTD type Pt-100 ATC temperature sensor.
$679.00 AUD + GST
$746.90 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3921
DO & temperature controller with 2 sets of On/Off relays, stored calibration data, backlit LCD display for DO and temperature.
$616.00 AUD + GST
$677.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6312DTF
Dissolved Oxygen, Temperature In-line Analyzer. 1/4 DIN, IP65, panel mount pH/DO/Temp analyzer with two sets of 2 wire 4-20mA current output, 2 sets of programmable on/off relay, RS485 output and backlight.
$1,556.00 AUD + GST
$1,711.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-DO3910
Industrial 2-wire DO transmitter with an isolated 4- 20 mA current output with an LCD display for DO and temperature. Designed for use with Hamilton Company Oxysens and Oxyferm DO electrodes
$852.00 AUD + GST
$937.20 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6312CTB
Dual current EC analyzer, isolated reversible transmitters, 2 or 4 wire probes, RS-485 and 2 relays.
$1,630.00 AUD + GST
$1,793.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-6308CT
Conductivity, TDS, salinity and temperature on-line RS-485 analyzer.With an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients, 4-20 mA output and 2 programmable relays for conductivity and one relay for temperature with an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
$1,168.00 AUD + GST
$1,284.80 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-3321
Menu driven, sealed, backlit, conductivity controller with 2 relays and tinned lead connectors.
$616.00 AUD + GST
$677.60 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-TSPHCP0560
Alpha PH560 pH/ORP Controller with 2 relay outputs. Includes 110/220V (9VDC) power adapter
$818.00 AUD + GST
$899.80 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-TSPHCP0550
Alpha PH550 pH/ORP Monitor. Includes 110/220V (9VDC) power adapter
$635.00 AUD + GST
$698.50 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each