Industrial online pH/ORP/Temp controller, 1/4 DIN with graphic display and RS485 interface software
ORDER ME IN
Order Me In, Once ordered this item will likely dispatch before the 19th of October 2025, call 1300 737 871 (NZ 0800 737 871) to confirm.
pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID?s. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.
Regular price
$1,479.50 AUD
+ GST
$1,627.45 AUD Inc. GST
$1,627.45 AUD Inc. GST




Features:
- pH/ORP/temperature measurement & control
- Display pH electrode efficiency
- Reversible & isolated 4~20ma output
- RS-485 output
- Bumpless calibration
- Graphic LCD display,128 x 64 with backlight
- Membrane switch with audio feedback
- Auto temp. compensation
- High 50/60 hz noise rejection
- Pipe/wall/panel mounting
- 1/4 DIN watertight enclosure
- One programmable relay for temp.
- CE approved
- Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output
Specifications
- pH Range: -2.00 to 16.00
- pH Resolution: 0.01 pH
- pH Accuracy: 0.1 % ?1 LSD
- Temperature Range: -10.0 to 120?C
- Temperature Resolution: 0.1 ?C
- Temperature Accuracy: ?0.3?C
- ORP Range (Absolute): -2500 to 2500 mV
- ORP Resolution (Absolute): 1 mV
- ORP Accuracy (?0.1% rdg ? 1 mV
- ORP Range (Relative): -6499 to 6499 mV
- ORP Resolution (Relative): 1 mV
- ORP Accuracy (Relative): ?0.1% rdg ? 1mV
- Temperature Compensation Range: -10.0 to 120.0?C
- Buffer Recognition: 4.01,7,10.01/4.00,6.86, 9.18
- Buffer Temperature Range: 0 to 60.0?C
- Electrode Slope Compensation: ?30% of ideal slope
- Electrode Offset Compensation: ?100 mV
- Input Impedance: Greater than 10 exp(13) ohms
- Calibration Auto End Point Sensing: Yes
- pH: 2 programmable high or 2 low
- ORP: 2 programmable high or 2 low
- Temperature: 1 programmable high or 1 low
- Control type: On/off
- Relay Output (Resistive load only): 5 amps at 115 VAC 2.5 amps at 230 VAC
- Relay Set Point Hysteresis: User programmable
- Type: Isolated 4 to 20 mA
- Range: Selectable zero, & span
- Accuracy: ?0.02 mA
- Isolated Voltage: 500 VDC
- Maximum Load: 500 w
- ATC Sensor: Thermistor 10 kiloohms at 25?C
- Security Protection: 4digit password
- Keypad: Audio feedbackup
- Communication: RS-485
- Pre-amplifier Voltage: ?5 VDC,20 mA max output
- Power Source: 115/230 VAC, 50/60 Hz
- Dimensions: 1/4 DIN, depth 148 mm
- Weight: 950 gm
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au