Sensors
Cdi5200 Flow Meter For Steel Pipes (1")
Product code: IC-5200-10S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$849.00
AUD + GST
$933.90
AUD Inc. GST
1 in stock
TP-03 - Thermocouple Probe (Type K) - 50C To 1100C
Product code: TP-03
Thermocouple Probe (Type K) - 50C To 1000C
$138.00
AUD + GST
$151.80
AUD Inc. GST
100M Roll of Type K Thermocouple Cable
Product code: IC-KX-7/0.2PVC-100
KX PVC Cable is a single-pair, thermocouple extension and compensating cable with laid flat construction. Each conductor is insulated using heat resistant PVC
$210.00
AUD + GST
$231.00
AUD Inc. GST
10 in stock
True TDR-315H - IC-ACC-TDR-315H
Product code: IC-ACC-TDR-315H
Fully Integrated Digital TDR. All electronics in sensor. SDI-12 Output. Low power consumption. 15cm waveguide length. This sensor is normally priced at $595+GST!
$525.00
AUD + GST
$577.50
AUD Inc. GST
1 in stock
$21.00
AUD + GST
$23.10
AUD Inc. GST
1 in stock
Type A thermistor probe
Product code: EL-P-TP-PLUS
High accuracy 3 metre long, type A thermistor probe with stainless steel tip for use with all Lascar EasyLog TP+ data loggers. - EL-21CFR-TP-LCD+ - EL-USB-TP-LCD+ - EL-GFX-DTP+ - EL-WIFI-TP+ - EL-WIFI-DTP+
$78.00
AUD + GST
$85.80
AUD Inc. GST
Flowatch Kit2 - Water flow kit
Product code: IC-FL-KIT2
The Flowatch Kit is designed a flowmeter-thermometer kit designed to measure almost any liquid or gasesous medium using the two included air and water impellers.
$760.00
AUD + GST
$836.00
AUD Inc. GST
Flowatch Kit1 - Water Flow Kit
Product code: IC-FL-KIT1
The Flowatch Kit is designed a flowmeter-thermometer kit designed to measure almost any liquid or gasesous medium using the two included air and water impellers.
$779.00
AUD + GST
$856.90
AUD Inc. GST
1 in stock
Cdi5200 Flow Meter For Copper Pipes (0.75")
Product code: IC-5200-07C
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$829.00
AUD + GST
$911.90
AUD Inc. GST
F-44376L-8 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44376L-8
The F-44376L-8 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 1/2" pipe size. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$149.00
AUD + GST
$163.90
AUD Inc. GST
3 in stock
F-44375LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44375LK-6
The F-44375LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.1 to 1.0 GPM (0.4 to 4.0 LPM). With 3/8" pipe size, PTFE float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$184.00
AUD + GST
$202.40
AUD Inc. GST
1 in stock
2 Metre 12-bit Temperature/RH Smart Sensors
Product code: S-THC-M002
The Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept smart sensors. All sensor parameters are stored inside the smart sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
$369.00
AUD + GST
$405.90
AUD Inc. GST
F-40250LN-6 Acrylic Flow Meter
Product code: IC-40250LN-6
Acrylic flow meter with F/NPT adapters with high grade Viton o-ring seals and aluminum “stress ring” thread supports. -0.025 to 0.250 GPM/0.1 to 1.0 LPM -Appropriate for direct sunlight applications.
$139.00
AUD + GST
$152.90
AUD Inc. GST
3 in stock
HOBOnet 90cm soil moisture and temperature sensor
Product code: IC-RXW-GP6-922
The HOBOnet RXW-GP4-922 Multi-Depth Soil Moisture Sensor is a wireless sensor that works with the HOBOnet system to measure soil moisture and soil temperature at multiple depths with a single probe, for fast and easy installation. -Measures soil moisture along the entire length of each probe segment, resulting in the largest volume of influence per measurement section. -90 cm probe length.
$2,495.00
AUD + GST
$2,744.50
AUD Inc. GST
HOBOnet 60cm soil moisture and temperature sensor
Product code: IC-RXW-GP4-922
The HOBOnet RXW-GP4-922 Multi-Depth Soil Moisture Sensor is a wireless sensor that works with the HOBOnet system to measure soil moisture and soil temperature at multiple depths with a single probe, for fast and easy installation. -Measures soil moisture along the entire length of each probe segment, resulting in the largest volume of influence per measurement section. -60 cm probe length.
$2,142.00
AUD + GST
$2,356.20
AUD Inc. GST
8 Metre 12-bit Temperature/RH Smart Sensor
Product code: S-THC-M008
The Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept smart sensors. All sensor parameters are stored inside the smart sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
$369.00
AUD + GST
$405.90
AUD Inc. GST
F-44750LK-12 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44750LK-12
The F-44750LK-12 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). With 3/4" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$393.00
AUD + GST
$432.30
AUD Inc. GST
F-44750LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44750LK-8
The F-44750LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). With 1/2" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$393.00
AUD + GST
$432.30
AUD Inc. GST
F-44500LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44500LK-8
The F-44500LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.5 to 5.0 GPM (1.8 to 18.0 LPM). With 1/2" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$264.00
AUD + GST
$290.40
AUD Inc. GST
2 in stock
F-44500LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44500LK-6
The F-44500LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.5 to 5.0 GPM (1.8 to 18.0 LPM). With 3/8" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$264.00
AUD + GST
$290.40
AUD Inc. GST
F-44376LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44376LK-8
The F-44376LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 1/2" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$264.00
AUD + GST
$290.40
AUD Inc. GST
F-44376LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44376LK-6
The F-44376LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 3/8" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$264.00
AUD + GST
$290.40
AUD Inc. GST
F-44375LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44375LK-8
The F-44375LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.1 to 1.0 GPM (0.4 to 4.0 LPM). With 1/2" pipe size, PTFE float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$184.00
AUD + GST
$202.40
AUD Inc. GST
F-44250LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44250LK-8
The F-44250LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 0.250 GPM (0.1 to 1.0 LPM). With 1/2" pipe size, PVDF float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$184.00
AUD + GST
$202.40
AUD Inc. GST
F-44250LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44250LK-6
The F-44250LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 0.250 GPM (0.1 to 1.0 LPM). With 3/8" pipe size, PVDF float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$184.00
AUD + GST
$202.40
AUD Inc. GST
F-46050LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46050LX-12P
The F-46050LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$450.00
AUD + GST
$495.00
AUD Inc. GST
F-46050LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46050LX-08P
The F-46050LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$450.00
AUD + GST
$495.00
AUD Inc. GST
F-46030LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46030LX-12P
The F-46030LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$424.00
AUD + GST
$466.40
AUD Inc. GST
F-46030LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46030LX-08P
The F-46030LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$424.00
AUD + GST
$466.40
AUD Inc. GST
F-46020LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46020LX-12P
The F-46020LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$398.00
AUD + GST
$437.80
AUD Inc. GST