Per page:  
Display:  

Product code: IC-R153001
The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive networks across copper and fibre, helping to pin point and solve networking issues quickly. NaviTEK instantly displays everything you need to know about your network or cabling. This meter was priced at $1174.49+GST.
$1,115.52 AUD + GST
$1227.07 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: FLUKE-117
Fluke 117 Electrician's Digital Multimeter with Non-Contact Voltage
$374.00 AUD + GST
$411.4 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: FLUKE-325
Fluke 325 True-rms Clamp Meter
$366.00 AUD + GST
$402.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: FLUKE-117/323-KIT
Fluke 117/323 Electricians Multimeter Combo Kit
$536.00 AUD + GST
$589.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: FLUKE-115
Fluke Tru RMS 115 Digital Multimeter
$297.00 AUD + GST
$326.7 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: ICQM1549
This is an excellent true RMS multimeter that features a large, easily read display and carries an IP67 environmental rating.
$81.77 AUD + GST
$89.95 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: ICMS6115
Just plug the Mains Power Meter into a normal power point and turn it into a real-time power monitoring outlet.
$18.14 AUD + GST
$19.95 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-4 business days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-AT-6020
Amprobe's newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse.
$1,553.00 AUD + GST
$1708.3 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-AT-6010
Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the Transmitter is connected to the circuit (Energized or De-energized, up to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors.
$1,025.00 AUD + GST
$1127.5 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7703
The testo 770-3 cable-grabTM clamp meter is the ideal clamp amperemeter for demanding measuring tasks in tight application environments. The movable pincer arm can be fully retracted into the instrument. This enables the instrument to grab tightly packed cables in a particularly accurate way.
$428.00 AUD + GST
$470.8 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1-2 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7702
The innovative grab mechanism makes the testo 770-2 the perfect clamp meter for non-contact measurements on tightly packed cables with a small diameter. In addition to the standard functions of the testo 770-1 clamp meter, it also offers a temperature adapter and measures current in the uA range.
$345.00 AUD + GST
$379.5 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1-2 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7701
The testo 770-1 clamp meter is ideally suited for non-contact current measurement on tightly packed power cables or conductors with a small diameter. The unique grab mechanism means you can grab each individual cable easily and safely.
$265.00 AUD + GST
$291.5 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in late August, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7603
The Testo 760-3 digital multimeter is the multitasker for all important professionals in the electricity sector. It enables you to carry out both simple and demanding electrical measuring tasks more reliably than ever before. The testo 760-3 automatically detects the appropriate measurement parameter via the socket assignment and so prevents dangerous incorrect settings.
$406.00 AUD + GST
$446.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7602
The testo 760-2 digital multimeter is the allrounder for all important electrical measuring tasks. Thanks to the automatic detection of measurement parameters, it offers the greatest possible reliability for every application. You can also measure current in the uA range and determine the true root mean square using this digital multimeter.
$306.00 AUD + GST
$336.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7601
The Testo 760-1 uses Testo's exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring. The testo 760-1 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections.
$184.00 AUD + GST
$202.4 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in late August, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7552
The 755-2 is suitable for determining voltage or de-energization, checks voltage level and continuity and measures flow of current along with current consumption. It is a simple task to change faulty measuring tips - without needing to replace the instrument. And the automatic measurement parameter detection and integrated torch make operation and measurement particularly easy and reliable.
$324.00 AUD + GST
$356.4 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in late August, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7551
The testo 755 automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy. Features include polarity detection for DC circuits, 3-phase sequence check with motor rotation indication and single lead voltage test with audible indication.
$262.00 AUD + GST
$288.2 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7503
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-3 features single pole phase testing, RDC/RC trigger function, LC dispplay, low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$190.00 AUD + GST
$209 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-0590-7502
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-2 features single pole phase testing, RDC/RC trigger function, low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$137.00 AUD + GST
$150.7 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7501
The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. The testo 750-1 offers low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.
$89.00 AUD + GST
$97.9 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-0590-7450
The testo 745 non-contact voltage tester is ideally suited for fast initial checking of any suspected fault sources. It filters high-frequency interference signals and has a two-stage sensitivity setting.
$61.00 AUD + GST
$67.1 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1-2 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-TM-904
The Tenmars TM-904 Flbre Fault Locator is compatible with 2.5mm universal Ferrule connector (FC) for visually identifies and locates faults in fibre optic cabling.
$450.00 AUD + GST
$495 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-TM-903
The Tenmars TM-903 Multimedia Cable Tester is a hand-held test instrument that lets you verify and troubleshoot LAN cables. Displays graph wire-map, opens, shorts, miss wires, split pairs and the remote ID number, all on one screen.
$350.00 AUD + GST
$385 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R158004
The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality or other factors. Supports PoE up to 90W (PoE++).
$1,128.67 AUD + GST
$1241.54 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R158003
The new VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling. It offers the standard VDV II features with some extra additional functionality; Distance to Open / Short (TDR), PoE Detection with Voltage Information, Media Service Detection, Ethernet Detection with Network Rate and Duplex Information.
$745.14 AUD + GST
$819.65 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R158002
The new VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling. It offers a larger 2.9" Display, Backlight, Hub Blink, Cable Length, Distance to Open, Carry Case & Cables.
$506.26 AUD + GST
$556.89 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R154000
A Gigabit Ethernet Loop-back device with single Copper and Optical Ports. Includes 1 x NiMH Battery, 2 x Patch Cables - 30cm Cat5eSTP, 1 x PSU with EU/UK/US adaptors, 1 x CD Manual, 1 x English Quick Reference Guide, 1 x Carry Case.
$1,740.12 AUD + GST
$1914.13 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R152003
A GbE Multistream Bidirectional transmission tester with single Copper and Optical Ports and Y.1564. Includes 1 x NiMH Batt, 2 x Patch Cables, 1 x PSU with EU/UK/US adaptors, 1 x CD Manual, 1 x English Quick Ref Guide, 1 x Carry Case, 1 x Carry Strap.
$5,678.40 AUD + GST
$6246.24 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R152002
A Gigabit Ethernet Multistream Bidirectional transmission tester with single Copper and Optical Ports. Includes 1 x NiMH Batt, 2 x Patch Cables, 1 x PSU with EU/UK/US adaptors, 1 x CD Manual, 1 x English Quick Ref Guide, 1 x Carry Case, 1x Carry Strap.
$4,470.84 AUD + GST
$4917.92 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-R152001
A Gigabit Ethernet transmission tester with single Copper Port. Includes 1 x NiMH Battery, 2 x Patch Cables - 30cm Cat5eSTP, 1 x PSU with EU/UK/US adaptors, 1 x CD Manual, 1 x English Quick Reference Guide, 1 x Carry Case, 1 x Carry Strap.
$3,442.98 AUD + GST
$3787.28 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each