Building Material & Timber Moisture Meters Accessories

Per page:  
Display:  

Product code: IC-12518
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets, shredded olive stones and sawdust.
$912.00 AUD + GST
$1003.2 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-12520
BL2 hammer (ram electrode) with 2 meter cable, for determination of water content of round timber and split logs, measuring range 8 to 60% water content.
$681.00 AUD + GST
$749.1 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-12846
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
$631.00 AUD + GST
$694.1 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-13755
The B 55 Bl active electrode is used together with the BL UNI 10 and other similar hydromettes to provide non-destructive measurement of moisture in building materials. Has a measuring range of 0.3 - 8.5 wt.-%/0.3 - 6.5 CM-%, depending on the tested material.
$608.00 AUD + GST
$668.8 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-3750
The active electrode B 50 is a probe designed for the field of structural moisture using the capacitive high frequeny. The electrode is applicable for all Hydromettes that are using this kind of measuring principle.
$586.00 AUD + GST
$644.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: CALBOXMRH3
Calibration Box for MRH3.
$118.18 AUD + GST
$130 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: SAL75
Calibration Salt Check for Hygro-i probes. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i RH probe is optimum.
$118.18 AUD + GST
$130 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-PTMCAL
Calibration Plug Set for Timber Meters (set of 3)
$118.18 AUD + GST
$130 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: CALCRH
Calibration Plate for CME4, CMEX, CRH
$118.18 AUD + GST
$130 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: CALBOXMEP
Calibration Box for MEP.
$118.18 AUD + GST
$130 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: TP20
Pins for Built-In Electrodes on Compact and Professional
$54.55 AUD + GST
$60.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: TP30
Replacement Tapered Non-Insulated Pins for Electrode, Fits hand held electrode series HH14 and HH15
$68.18 AUD + GST
$75 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: SPI90
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 175mm
$72.73 AUD + GST
$80 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: SPI52
Tramex Hammer Electrode Replacement Pins (Pack of 10) - max penetration 36mm
$90.91 AUD + GST
$100 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-SPI200
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 72mm
$81.82 AUD + GST
$90 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$143.00 AUD + GST
$157.3 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$198.00 AUD + GST
$217.8 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$116.00 AUD + GST
$127.6 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$364.00 AUD + GST
$400.4 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-HiPP1
Hygro-I Probe for use with the CMEXPert or MRHIII
$186.36 AUD + GST
$205 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHLX12
12 x Hygro-I Extra Long Hole Liners - 50 Sets of Hole Liners and Caps
$71.82 AUD + GST
$79 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHLXL100
100 x Hygro-I Extra Long Hole Liners - 50 Sets of Hole Liners and Caps
$295.45 AUD + GST
$325 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-HiPP1-IE
Hygro-I Probe for use with the CMEXPert or MRHIII along with Electronic interface to allow for connection to these meters
$240.91 AUD + GST
$265 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-HiPP3
3 Pack of Hygro-I Probe for with the CMEXPert or MRHIII
$454.55 AUD + GST
$500.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-HiPP12
12 Pack of Hygro-I Probe for with the CMEXPert or MRHIII
$1,472.73 AUD + GST
$1620 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 1-2 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHLX50
50 x Hygro-I Extra Long Hole Liners - 50 Sets of Hole Liners and Caps
$177.27 AUD + GST
$195 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHL50
50 x Hole Liners used with Tramex Hygro-i relative humidity probes for performing ASTM F2170
$148.18 AUD + GST
$163 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHL12
12 x Hole Liners used with Tramex Hygro-i relative humidity probes for performing ASTM F2170
$60.91 AUD + GST
$67 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHHL100
100 x Hole Liners used with Tramex Hygro-i relative humidity probes for performing ASTM F2170
$240.91 AUD + GST
$265 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RHIE
For use with the new CMEXpert II and MRH III meters only. Attaches Hygro-i RH Probe to the meter. (Does not include Hygro-I Probe)
$136.36 AUD + GST
$150 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-5 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each