Per page:  
Display:  

Product code: IC-ExpertVibro
Expert Vibro is the device for acquiring transient signals and vibrations. The latest processor technology, based on powerful FPGAs, enables up to 16 synchronous channels to be processed at sampling rates to 50 kHz per channel while requiring minimal space. 24-Bit A/D converters ensure high precision.
in stock icon
For a personalised quote, add to cart. Then in the checkout choose create a quote.
each

Product code: IC-ExpertTransient
Expert Transient is a data recorder that can operate independently for the synchronous acquisition of transient and periodical processes. Measurement data can be triggered or continuously recorded over long time periods. Expert Transient is equipped with the powerful FPGA technology.
in stock icon
For a personalised quote, add to cart. Then in the checkout choose create a quote.
each

Product code: IC-ExpertKeyC
Expert Key devices have been designed and developed according to actual customer requirements and incorporate reliable measurement technology. The devices can be connected to PCs via USB or LAN interfaces. The Expert Key 100C and 200C are identical to the L models except for their housings. The housing design enables the devices to be used in cabinets or, 19 inch. racks.
in stock icon
For a personalised quote, add to cart. Then in the checkout choose create a quote.
each

Product code: IC-MX1104
The HOBO MX1104 multi-channel data logger measures and transmits temperature, relative humidity, and light intensity data wirelessly. It also includes an external analogue input to attach a variety of additional sensors.
$460.00 AUD + GST
$506.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 6th of June 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: VERSALOG-DCVC-HR
8 Channel High Resolution DC Voltage and Current Data Logger. CH1 to CH4 Programmable Ranges of -5 to +20V, CH5 to CH7 Programmable Ranges of 0-20mA, CH8 Internal Temperature
$1,108.00 AUD + GST
$1,218.80 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 6th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: ThermoVaultX-8
The ThermoVaultX-8 is a thermally insulated, oven temperature recorder with eight thermocouple channels. Capable of withstanding extreme temperatures up to 662 F for up to 25 minutes when properly sealed, the external thermocouple probes provide accurate temperature measurements with fast response times. Its stainless steel enclosure and thermal properties lend itself to be the ideal temperature recording device for applications such as powder coating cure ovens, wet coating cure ovens, batch ovens and conveyor ovens.
$4,462.00 AUD + GST
$4,908.20 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: A2-05-KIT
Vaccine Storage Temperature Monitoring Kit
$1,622.00 AUD + GST
$1,784.20 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 6th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: ThermoVaultX-4
The ThermoVaultX-4 is a thermally insulated, oven temperature recorder with four thermocouple channels. Capable of withstanding extreme temperatures up to 662 F for up to 25 minutes when properly sealed, the external thermocouple probes provide accurate temperature measurements with fast response times. Its stainless steel enclosure and thermal properties lend itself to be the ideal temperature recording device for applications such as powder coating cure ovens, wet coating cure ovens, batch ovens and conveyor ovens.
$3,952.00 AUD + GST
$4,347.20 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: TMC6-HD
Hobo Temperature Probe with 1.8m Lead
$105.00 AUD + GST
$115.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 10th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-NOD-005
Detachable human-machine interface for the Fieldlogger Data Logger. This little HMI fits into the front of our FieldLogger, allowing the monitoring of channels, live view of channels as a graph, alarms monitoring and some basic configuration of the FieldLogger's communication parameters (ethernet network settings, Modbus slave settings)
$295.90 AUD + GST
$325.49 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 3rd of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-NOD-0101
LogBox Connect BLE Magnetic Mounting Plate allows you to easily mount the datalogger to a steel plate.
$60.50 AUD + GST
$66.55 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 3rd of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-B-513
B-513 Logic Input/Output cable, 2 metres in length, bare wire end.
$175.00 AUD + GST
$192.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 3rd of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$60.00 AUD + GST
$66.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$109.00 AUD + GST
$119.90 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-U12-PH
The U12-PH has pin-headers installed (component side) instead of screw-terminals, and the LED is mounted on the component side. Ships with the populated PCB only.
$367.00 AUD + GST
$403.70 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$290.50 AUD + GST
$319.55 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$184.00 AUD + GST
$202.40 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$45.00 AUD + GST
$49.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$45.00 AUD + GST
$49.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 16th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: Logtag-Case
LogTag protective case that protects your LogTag data logger from spills, dust and knocks. This high-impact plastic enclosure is dust and water resistant but designed to minimise thermal lag. Made from high-impact poly-carbonate plastic. Allows you to see alerts and LCD display without removing the case.​ The high quality silicon seal offers excellent dust and water resistance​.
$25.00 AUD + GST
$27.50 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: GL980
High speed general purpose data logger with 7" colour display with eight analogue channels.
$4,850.00 AUD + GST
$5,335.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-HOUSING-U2X
The U2X Housing is a protective enclosure for mounting Onset's HOBO U24 conductivity and HOBO U20 water level data loggers. The U2X housing is designed to allow a data logger to be mounted in harsh environments while not restricting the flow of media around the device. Supplied with six zip ties and mounting recommendations, it allows for easy deployment in a variety of water monitoring applications.
$126.00 AUD + GST
$138.60 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 6th of June 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LM34CAZ
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.
$25.00 AUD + GST
$27.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LabJackUSBCable
LabJack USB Cable
$11.00 AUD + GST
$12.10 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-TKADDIN
LabJack TKAD DIN Clip
$36.50 AUD + GST
$40.15 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-LabJackEthernetCable
LabJack LabJack Ethernet Cable
$11.00 AUD + GST
$12.10 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 17th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-GL-840-CASE
Graphtec GL840 Carry Case, plastic with foam insert.
$200.00 AUD + GST
$220.00 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 3rd of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-B-569
Graphtec Lithium-ion Battery.
$295.00 AUD + GST
$324.50 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 3rd of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: RXW-WCG-922
The HOBOnet Wireless Ultrasonic Wind Speed & Direction Sensor is compact and rugged with no moving parts. Because this sensor is ultrasonic it can measure very low wind speeds, down to 0.4 m/s.
$3,077.00 AUD + GST
$3,384.70 AUD Inc. GST
in stock icon
Backorder Now, once ordered your item will dispatch before the 10th of May 2024, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: OctVolt-30V
Stand Alone, Battery Powered, Eight Channel, Low Level DC Voltage Data Logger, 0 - 30V
in stock icon
Unfortunately, the OctVolt-30V has been discontinued, check out our other Voltage Loggers for more options.
each