Defelsko PosiTector 6000 F0S1 Standard Coating Thickness Gauge
Product code: F0S1-G
The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1150 um. Built specifically for measuring on small parts, hard-to-reach areas, or close to edges. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$1,732.00
AUD + GST
$1,905.20
AUD Inc. GST
PosiTest G Magnetic Coating Thickness Gauge (0-2000um) - POSITESTG
Product code: POSITESTG
Easy to use magnetic pull-off thickness gauge measuring electroplating, thin paint films, phosphating on steel. Permanently calibrated. DeFelsko PosiTest G measurement range: 0 to 200um. Complies with the requirements of Australian Standard AS3894.3-2002.
$548.00
AUD + GST
$602.80
AUD Inc. GST
UT345A Ultrasonic Thickness Gauge - UT345A
Product code: UT345A
The UT345A is an advanced ultrasonic thickiness gauge that has a high-sensitive probe that can accurately detect any changes with the thickness of pipes, machine parts, pressure plates, etc. that can be changed due to wear or corrosion. Measurement range: 1.00 to 300.00mm. High-performance and low-power consumption. Can store up to 300 groups of data.
$196.00
AUD + GST
$215.60
AUD Inc. GST
Defelsko PosiTector 6000 F3 Advanced Coating Thickness Gauge
Product code: F3-G
The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1500 um. With Wifi and Bluetooth technology and increased storage space (up to 250,000 readings). Made for measuring dry film thickness (DFT) on ferrous substrates; can be used for almost any application of measuring non-magnetic coatings on steel, iron and other ferrous substrates. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$1,826.00
AUD + GST
$2,008.60
AUD Inc. GST
DataLogging Ultrasonic Coating & Wall Thickness Gauge (A-Scan Display)
Product code: IC-TI-CMXDLP
The new CHECKLINE TI-CMXDLP is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately from only one side. Has an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance.
$7,634.00
AUD + GST
$8,397.40
AUD Inc. GST
Defelsko PosiTector 6000 F0S3 Advanced Coating Thickness Gauge
Product code: F0S3-G
The rugged, fully electronic Advanced PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1150 um. With Wifi and Bluetooth technology and increased storage space (up to 250,000 readings). Built specifically for measuring on small parts, hard-to-reach areas, or close to edges. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$2,437.00
AUD + GST
$2,680.70
AUD Inc. GST
PosiTest F Magnetic Coating Thickness Gauge (0-2000um) - POSITESTF
Product code: POSITESTF
Easy to use magnetic pull-off, thickness gauge to measure hot dip galvanizing, hard chrome metalizing, paint, enamel and plastic coatings on steel. Permanently calibrated. DeFelsko PosiTest F measurement range: 0 to 2000um. Complies with the requirements of Australian Standard AS3894.3-2002.
$548.00
AUD + GST
$602.80
AUD Inc. GST
Digital Thickness Gauge for Textiles and Non-woven textiles, 10 mm / 0.4" Range
Product code: IC-J-40-T
The J-40 Series thickness gauge can be used to determine the material thickness of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. Standard measurement range of 0 - 10 mm. Suitable for making quick and simple measurements. Corresponds to DIN EN ISO 5084.
$849.00
AUD + GST
$933.90
AUD Inc. GST
Defelsko PosiTector 6000 F1 Standard Coating Thickness Gauge
Product code: F1-G
The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic principles to measure paint thickness on ferrous metals accurately and quickly from 0 to 1500 um. Made for measuring dry film thickness (DFT) on ferrous substrates; can be used for almost any application of measuring non-magnetic coatings on steel, iron and other ferrous substrates. Easy to operate and provides quick measurements (60+ readings per minute). Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring.
$1,120.00
AUD + GST
$1,232.00
AUD Inc. GST
Defelsko PosiTector 200 D3 Advanced Coating Thickness Gauge
Product code: 200D3-G
The Defelsko PosiTector 200 D3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200C type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 7600 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$5,091.00
AUD + GST
$5,600.10
AUD Inc. GST
Defelsko PosiTector 200 D1 Standard Coating Thickness Gauge
Product code: 200D1-G
The Defelsko PosiTector 200 D1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 7600 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,320.00
AUD + GST
$4,752.00
AUD Inc. GST
Defelsko PosiTector 200 C1 Standard Coating Thickness Gauge
Product code: 200C1-G
The Defelsko PosiTector 200 C1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200C type C probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 50 - 3800 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$3,977.00
AUD + GST
$4,374.70
AUD Inc. GST
Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge
Product code: 200B3-G
The Defelsko PosiTector 200 B3 Advanced Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. It has Bluetooth and WiFi connectivity and storage for 250,000 readings. Advanced PosiTector meters have Bluetooth and Wifi connectivity and can measure up to three layers with graphics. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 13 - 1000 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$4,406.00
AUD + GST
$4,846.60
AUD Inc. GST
Defelsko PosiTector 200 B1 Standard Coating Thickness Gauge
Product code: 200B1-G
The Defelsko PosiTector 200 B1 Standard Coating Thickness Gauge measures the thickness of coatings over non metals including plastic, timber, composites and more. Non-destructively measures coating thickness over plastic, carbon fibre, timber and more using proven ultrasound technology. Includes 200B type probe for measuring coatings on carbon fibre, plastics, plasterboard and other non metals from 13 - 1000 um. Certificate of Calibration showing traceability to NIST or PTB included (Long Form).
$3,634.00
AUD + GST
$3,997.40
AUD Inc. GST
AD-3253 Ultrasonic Thickness Gauge
Product code: AD-3253
The AD-3253 is an ultrasonic thickness gauge ideal for testing where access to both sides of the material is not available. Surface contact is all that is required. -Low cost, light weight and the easy to operate. -Thickness range of 2 to 200 mm
PR-9 Sonic Tester Thickness Gauge
Product code: IC-PR-9
The PR-9 sonic tester is a dedicated design for the racing industry, and commonly used to measure the thickness of cylinder walls, head ports, decks, chassis tubing, body panels, and windshields. -Features a high speed scan mode that quickly detects the lowest reading per scan. -Compatible with different types of probes for different applications. -CE Certified.
$2,850.00
AUD + GST
$3,135.00
AUD Inc. GST
CTR 1000i Coating Thickness Gauge - IC-CTR-1000i
Product code: IC-CTR-1000i
The CTR-1000i is a coating thickness gauge with an integrated probe sensor, used for testing the thickness of coatings such as paint on ferrous or non ferrous metals.
$595.00
AUD + GST
$654.50
AUD Inc. GST
Coating Thickness Gauge LITE - IC-DPM-816 LITE
Product code: IC-DPM-816-LITE
The simplified version of the DPM-816 Pro with lower measurement range. Also appropriate for any non-metallic coating applied on a metal base. Can be used in checking paint thickness in cars when making repairs, measuring the thickness of of fireproof or protective coatings and on making dent repairs on the car body.
PosiTector Inspection Kit Case - CASEINSP
Product code: CASEINSP
Convenient hard shell case for carrying a PosiTector gauge body and multiple probes. Includes compartments for Certificates of Calibration, instruction manuals and accessories.
$78.00
AUD + GST
$85.80
AUD Inc. GST
Certified Coated Metal Plates A3 Non-Ferrous - STDA3
Product code: STDA3
Certified Coated Metal Plates A3 Non-Ferrous 75 125 250 500um. Four plates of epoxy on aluminium mounted in a protective binder, Approximate plate thicknesses: 75um, 125um, 250um, 500um. Ideal for verifying the accuracy of PosiTector 100 B, 200 and 200 B probes. Coating thickness standards assist with meeting quality control requirements. Ideal for use in the calibration lab, in the field or on the factory floor.
$688.00
AUD + GST
$756.80
AUD Inc. GST
Bluetooth Printer (Advanced Models Only) - PRINTERBT
Product code: PRINTERBT
Prints readings and statistical summaries from Advanced PosiTector models via Bluetooth wireless technology. With rechargeable lithium ion battery with universal AC adaptor.
$656.00
AUD + GST
$721.60
AUD Inc. GST
$92.00
AUD + GST
$101.20
AUD Inc. GST
DeFelsko Belt Clip for PosiTector - BELTCLIP
Product code: BELTCLIP
Belt Clip for use with PosiTector gauge bodies.
$29.00
AUD + GST
$31.90
AUD Inc. GST
Pelican Case for Inspection Kits 30x22x13cm - CASEINSP-P
Product code: CASEINSP-P
Heavy-duty, waterproof Pelican cases come complete with a custom foam insert to securely hold your PosiTector instruments and 3+ PosiTector probes. Custom foam insert securely stores the PosiTector gage body and multiple probes and accessories. Automatic Pressure Equalization Valve - balances interior pressure, keeps water out. Lightweight, watertight & crushproof.
$489.00
AUD + GST
$537.90
AUD Inc. GST
Protective Lens Shield (Pack of 5) - LENSSHIELD
Product code: LENSSHIELD
Pack of five thin plastic lens shields. Ideal for protecting the PosiTector display from paint overspray. For use with PosiTector models 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI.
$19.00
AUD + GST
$20.90
AUD Inc. GST
DeFelsko AC Power Kit - USBAC
Product code: USBAC
Kit supplies many alternate power solutions for battery-operated PosiTector. Allows the gauge to operate continuously without the need for batteries. Includes a selection of electrical plugs for use in different countries.
$88.00
AUD + GST
$96.80
AUD Inc. GST
Transducer - IC-T-104-1000
Product code: IC-T-104-1000
1/2" diameter, 2.25 MHz dual element transducer. Potted cable, side in
$656.00
AUD + GST
$721.60
AUD Inc. GST
$309.00
AUD + GST
$339.90
AUD Inc. GST
High Temperature Transducer - IC-T-044-2700
Product code: IC-T-044-2700
1/2" diameter, 5.00 MHz dual element transducer for TI-25M, TI-25DL and TI-25MMX.
$754.00
AUD + GST
$829.40
AUD Inc. GST
High Temperature Probe/Transducer - IC-T-212-2001
Product code: IC-T-212-2001
1/4" diameter 5.00 MHz Hi-Temp Transducer, 500 C/950 F. Dual Microdot connectors, top-in. Supplied with cable.
$957.00
AUD + GST
$1,052.70
AUD Inc. GST