Starr Instruments
Surface Roughness Meter - IC-RTD-100
Product code: IC-RTD-100
The RTD-100 is a gauge for measuring surface roughness and is best used with flat or large curved areas where access is not an issue. The RTD-100 has a sturdy metal case and is easy to read with a bright OLED dot matrix screen. Measurements are shown in Ra or Rz.
$1,295.00
AUD + GST
$1,424.50
AUD Inc. GST
RTD-210 Surface Roughness Gauge
Product code: IC-RTD-210
The RTD-210 uses a highly sensitive, diamond tipped stylus that accurately traces the surface, measuring the vertical deviations from the centre line. The separate stylus drive unit is attached on a 1mt long fly-lead to allow roughness measurement of both inside and outside bores on small diameter pipe or tube, stepped gears, o-ring grooves and recessed notches.
$2,395.00
AUD + GST
$2,634.50
AUD Inc. GST
Multiple Parameter Surface Roughness Meter
Product code: IC-RTD-200
The RTD-200 is a feature packed surface roughness gauge measuring in multiple parameters including Ra, Rz, Rq, Rp amongst others. With included software for data management and a protruding stylus suitable to measure inside holes and curved surfaces, this device is suitable for most applications.
$1,995.00
AUD + GST
$2,194.50
AUD Inc. GST
LHT-160 Portable Hardness Tester Complete Kit
Product code: IC-LHT-160C
Portable LEEB Hardness tester with a large, colour display to view test results or instantly print test data using the integral printer. Includes D type impact device, suitable for general use on most steels and other metal with thickness over 5mm and bulk weight above 5kg. Also includes a calibration reference test block.
$1,995.00
AUD + GST
$2,194.50
AUD Inc. GST
LHT-160 Portable Hardness Tester
Product code: IC-LHT-160
Portable LEEB Hardness tester with a large, colour display to view test results or instantly print test data using the integral printer. Includes D type impact device, suitable for general use on most steels and other metal with thickness over 5mm and bulk weight above 5kg.
$1,795.00
AUD + GST
$1,974.50
AUD Inc. GST
CTR 1000i Coating Thickness Gauge - IC-CTR-1000i
Product code: IC-CTR-1000i
The CTR-1000i is a coating thickness gauge with an integrated probe sensor, used for testing the thickness of coatings such as paint on ferrous or non ferrous metals.
$595.00
AUD + GST
$654.50
AUD Inc. GST
Advanced Model Surface Roughness Meter - IC-RTD-300
Product code: IC-RTD-300
The Starr Instruments Surface Roughness Gauge RTD-300 is an advanced model with separate stylus and motor drive unit for greater access into tight spaces allowing tests on even more surfaces. Advanced data capabilities show the waveform graph on the LCD screen which can be saved into memory for further analysis.
$2,395.00
AUD + GST
$2,634.50
AUD Inc. GST
FGD Manual Stand - IC-FGD-Stand
Product code: IC-FGD-Stand
A mechanical handwheel test stand for use with the FGD-Series force gauge for accurate compression and tension force testing. Used for controlled load testing application in the lab or on the production line.
$995.00
AUD + GST
$1,094.50
AUD Inc. GST
DSD Series Test Stand - IC-DSD-Stand-A
Product code: IC-DSD-Stand-A
DSD stand is used with the DSD-series Durometers to improve the consistency of results during batch testing. It allows users to control the load application force in line with ASTM standard requirements. It is fitted with a test weight of 1Kg which is suitable for Shore A testing.
$995.00
AUD + GST
$1,094.50
AUD Inc. GST
LEEB Hardness calibration block - IC-LHT-Test
Product code: IC-LHT-Test
The LHT-Test Block is a hardness reference block for the calibration of portable hardness testers.
$295.00
AUD + GST
$324.50
AUD Inc. GST
FGD Ergonomics Kit
Product code: FGD-ERGO-KIT
Ergonomics attachment measuring kit to suit FGC and FGD series digital force gauges. This kit includes various padded attachments and handle grips used to allow comfortable testing of human limbs during physiotherapy and rehabilitation analysis.
$495.00
AUD + GST
$544.50
AUD Inc. GST
Thickness Gauge Probe Transducer
Product code: TGP5R6
The TGP5R6 is an additional probe transducer, with different configurations, for ultrasonic thickness gauges in applications that the standard probe that cannot be completed using the standard probe. Different measurements are available.
$195.00
AUD + GST
$214.50
AUD Inc. GST
FGD Force Gauge Handle Cradle
Product code: FGD-HANDLE
Handle Cradle to suit Force Gauges (drilled to suit). Allows users to easily apply & evenly distribute push and pull forces for accurate measurement, during manual handling testing up to 1000N (100Kg/f).
$79.00
AUD + GST
$86.90
AUD Inc. GST
Durometer Test Block Kit Shore D
Product code: DTBK-SHORE-D
Designed as a reference guide for users of durometers the test block kit can be useful when using the durometer as a hand device to assist a user to get a "feel" for what certain levels of hardness should feel like and help reduce errors caused by applying incorrect load pressure. -Kit includes 3 pieces measured in HD (13 ,30 ,92).
$99.00
AUD + GST
$108.90
AUD Inc. GST
DSD Series Test Stand - IC-DSD-Stand-D
Product code: IC-DSD-Stand-D
DSD stand is used with the DSD-series Durometers to improve the consistency of results during batch testing. It allows users to control the load application force in line with ASTM standard requirements. It is fitted with a test weight of 1Kg and an additional 4Kg, which is suitable for Shore D testing.
$995.00
AUD + GST
$1,094.50
AUD Inc. GST
SW-1 Step Wedge Calibration Block
Product code: IC-SW-1
A step wedge block is used for the calibration or reference checking of ultrasonic probes and thickness gauges. The step wedge block can be verified and certified by a NATA laboratory for use as a calibration tool to be used with thickness gauges. -4 steps: 3.0mm, 5.0mm, 10.0mm, 15.0mm
$149.00
AUD + GST
$163.90
AUD Inc. GST
Fruit Penetrometer for Apples, Peaches, Pears, Avocado, Kiwi, Tomatoes
Product code: FT-327
The FT series Fruit Penetrometer measures the penetration and squashing of fruit pulp using an indenter tip of specific dimension, to give one of the most accurate tests available, with the resulting pressure being measured in pounds and Kilograms. -For apples, peaches, pears, avocado, kiwi, and tomatoes.
$499.00
AUD + GST
$548.90
AUD Inc. GST
$695.00
AUD + GST
$764.50
AUD Inc. GST
Surface Roughness Meter With Protruding Stylus
Product code: IC-RTR-1000
The RTR-1000 is a Surface Roughness meter from Starr Instruments designed for use in a wide range of industrial applications. With is protruding stylus and multiple measurement modes it has many advantages and utilises Bluetooth for wireless transfer of data to PC.