F-40250LN-6 Acrylic Flow Meter
Product code: IC-40250LN-6
Acrylic flow meter with F/NPT adapters with high grade Viton o-ring seals and aluminum “stress ring” thread supports. -0.025 to 0.250 GPM/0.1 to 1.0 LPM -Appropriate for direct sunlight applications.
$648.00
AUD + GST
$712.80
AUD Inc. GST
3 in stock
Sigfox-Ready Thermal mass Gas Flowmeter
Product code: WSSFC-TMF128-G-DN20
WSSFC-TMF128 is a Sigfox-Ready Thermal mass gas flow meter designed especially for Oxygen, Nitrogen, or Compressed Air flow measurement. -Delivers accuracy better than 3% of reading plus 0.5% of span. -Can be configured via Sigfox downlink or RS485 Modbus RTU. -Compatible with RC1, RC2, and RC4 regions.
$2,010.00
AUD + GST
$2,211.00
AUD Inc. GST
pHionics STs ORP (Redox) Sensor with 4-20mA output
Product code: STS2100S-025
The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring. -Measurement range: -1000 to +1000 mV oxidation-reduction potential (ORP). -Has a narrow diameter (1.9 cm), appropriate for groundwater monitoring applications.
$1,985.00
AUD + GST
$2,183.50
AUD Inc. GST
pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA
Product code: STS3020S-025
The pHionics STs Series Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required. -0 to 20 mg/L or 0 to 200% saturation depending on scaling with datalogger or RTU. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge).
$2,592.00
AUD + GST
$2,851.20
AUD Inc. GST
pHionics STs pH Sensor with 4 to 20mA output
Product code: STS1014S-025
The pHionics STs Series pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring. -19mm diameter probe while a durable, chemical-resistant housing. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge). -Suitable for groundwater monitoring, wastewater treatment, aquaculture, pollution control, and many others.
$1,883.00
AUD + GST
$2,071.30
AUD Inc. GST
TDR-310W Soil Moisture Sensor
Product code: TDR-310W
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes for greenhouses.
$638.00
AUD + GST
$701.80
AUD Inc. GST
TDR-315N Soil Moisture Sensor
Product code: TDR-315N
A fully integrated digital TDR soil moisture sensor that has demonstrated superb accuracy consistently with excellent repeatability between six different soils including potter’s clay.
$638.00
AUD + GST
$701.80
AUD Inc. GST
Waterproof standard immersion/penetration probe (TC type T)
Product code: IC-0603-1293
The waterproof standard immersion and penetration probe (with the appropriate measuring instrument) enables temperature measurement in liquid and semi-solid media. -Thermocouple type T -Measuring range: -50 to +350 °C -Waterproof
$102.00
AUD + GST
$112.20
AUD Inc. GST
F-44500LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44500LK-8
The F-44500LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.5 to 5.0 GPM (1.8 to 18.0 LPM). With 1/2" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$434.00
AUD + GST
$477.40
AUD Inc. GST
2 in stock
F-44250LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44250LK-8
The F-44250LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 0.250 GPM (0.1 to 1.0 LPM). With 1/2" pipe size, PVDF float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$302.00
AUD + GST
$332.20
AUD Inc. GST
F-44375LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44375LK-6
The F-44375LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.1 to 1.0 GPM (0.4 to 4.0 LPM). With 3/8" pipe size, PTFE float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$302.00
AUD + GST
$332.20
AUD Inc. GST
F-44250LK-6 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44250LK-6
The F-44250LK-6 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 0.250 GPM (0.1 to 1.0 LPM). With 3/8" pipe size, PVDF float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$302.00
AUD + GST
$332.20
AUD Inc. GST
F-46050LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46050LX-12P
The F-46050LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$739.00
AUD + GST
$812.90
AUD Inc. GST
F-46050LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46050LX-08P
The F-46050LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$739.00
AUD + GST
$812.90
AUD Inc. GST
F-46030LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46030LX-12P
The F-46030LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$699.00
AUD + GST
$768.90
AUD Inc. GST
F-46030LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46030LX-08P
The F-46030LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$699.00
AUD + GST
$768.90
AUD Inc. GST
F-46020LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46020LX-12P
The F-46020LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$656.00
AUD + GST
$721.60
AUD Inc. GST
F-46020LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46020LX-08P
The F-46020LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$656.00
AUD + GST
$721.60
AUD Inc. GST
F-46010LX-12P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46010LX-12P
The F-46010LX-12P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 1.2 GPM (0.4 to 4.4 LPM). With 3/4" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$656.00
AUD + GST
$721.60
AUD Inc. GST
F-46010LX-08P Polysulfone Flow Meter with F/NPT Fittings and PVC Adapter
Product code: IC-F-46010LX-08P
The F-46010LX-08P flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 1.2 GPM (0.4 to 4.4 LPM). With 1/2" pipe size, F/NPT Fittings and PVC adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$656.00
AUD + GST
$721.60
AUD Inc. GST
F-46050LX-12K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46050LX-12K
The F-46050LX-12K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$861.00
AUD + GST
$947.10
AUD Inc. GST
F-46050LX-08K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46050LX-08K
The F-46050LX-08K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.5 to 5.0 GPM (2.0 to 20.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$861.00
AUD + GST
$947.10
AUD Inc. GST
F-46030LX-12K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46030LX-12K
The F-46030LX-12K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$822.00
AUD + GST
$904.20
AUD Inc. GST
F-46030LX-08K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46030LX-08K
The F-46030LX-08K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.3 to 3.0 GPM (1.0 to 11.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$822.00
AUD + GST
$904.20
AUD Inc. GST
F-46020LX-12K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46020LX-12K
The F-46020LX-12K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 3/4" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$779.00
AUD + GST
$856.90
AUD Inc. GST
F-46020LX-08K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46020LX-08K
The F-46020LX-08K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). With 1/2" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$779.00
AUD + GST
$856.90
AUD Inc. GST
F-46010LX-12K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46010LX-12K
The F-46010LX-12K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 1.2 GPM (0.4 to 4.4 LPM). With 3/4" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$779.00
AUD + GST
$856.90
AUD Inc. GST
F-46010LX-08K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46010LX-08K
The F-46010LX-08K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 1.2 GPM (0.4 to 4.4 LPM). With 1/2" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$779.00
AUD + GST
$856.90
AUD Inc. GST
F-44750L-12 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44750L-12
The F-44750L-12 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 3/4" pipe size. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$281.00
AUD + GST
$309.10
AUD Inc. GST
1 in stock
F-44750L-8 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44750L-8
The F-44750L-8 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 1/2" pipe size. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$281.00
AUD + GST
$309.10
AUD Inc. GST