Loggito Data Logger (USB) - IC-Loggito-USB
Product code: IC-Loggito-USB
The Loggito series is a new compact and flexible measurement system for data acquisition industry IoT. It enables inexpensive connectivity of decentralised measuring points for both low channel data logging and complex acquisition systems.
Loggito Data Logger (LAN) - IC-Loggito-LAN
Product code: IC-Loggito-LAN
The Loggito series is a new compact and flexible measurement system for data acquisition industry IoT. It enables inexpensive connectivity of decentralised measuring points for both low channel data logging and complex acquisition systems.
Expert Logger 300 - IC-ExpertLogger-300
Product code: IC-ExpertLogger-300
Expert Logger is a new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. Has analog Inputs for mV, mA, and thermocouples. Easy to operate and configure, with charts and guides that shows exactly how and where to install sensors. Can connect to devices using LAN or USB.
Expert Logger 200 - IC-ExpertLogger-200
Product code: IC-ExpertLogger-200
Expert Logger is a new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. Has analog Inputs for mV, mA, and thermocouples. Easy to operate and configure, with charts and guides that shows exactly how and where to install sensors. Can connect to devices using LAN or USB.
Expert Logger 100 - IC-ExpertLogger-100
Product code: IC-ExpertLogger-100
Expert Logger is a new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. Has analog inputs for mV, mA, and thermocouples. Easy to operate and configure, with charts and guides that shows exactly how and where to install sensors. Can connect to devices using LAN or USB.
Expert Key 100P - IC-Expert-P-200
Product code: IC-Expert-P-200
The Expert P series have console housings and plug connections for use in testing, trial, and laboratory applications. The Expert Key type 200 has 28 universal inputs and is intended more for analog measurement data. All signals are connected via 4 mm safety lab plugs. Different sensors such as voltage or current can all be directly connected to the Expert P and measurements can be transferred via LAN or USB.
Expert Key 100P - IC-Expert-P-100
Product code: IC-Expert-P 100
The Expert P series have console housings and plug connections for use in testing, trial, and laboratory applications. The Expert Key type 100 is equipped with a good range of analog and digital inputs and outputs and is therefore highly suited for use within test engineering. All signals are connected via 4 mm safety lab plugs. Different sensors such as voltage or current can all be directly connected to the Expert P and measurements can be transferred via LAN or USB.
Expert Key 200M - IC-Expert-M-200
Product code: IC-Expert-M-200
The Expert Key M are durable measurement data acquisition systems for use in demanding environments. They function from within robust cases with measuring cables being fed through brush strips on the case's lid. The Expert Key type 200 is equipped with 28 universal inputs and is intended more for analog measurement data. Connects easily to your laptop or PC via USB or LAN when needed. Signals can be connected via 4 mm safety lab plugs or any other type of plug or connector
Expert Key 100M - IC-Expert-M-100
Product code: IC-Expert-M-100
The Expert Key M are durable measurement data acquisition systems for use in demanding environments. They function from within robust cases with measuring cables being fed through brush strips on the case's lid. The Expert Key type 100 is equipped with a good range of analog and digital inputs and outputs and is therefore highly suited for use within test engineering. Connects easily to your laptop or PC via USB or LAN when needed. Signals can be connected via 4 mm safety lab plugs or any other type of plug or connector.
YDOC RTU 4G SDI-12 & Analogue. Pulse & Accessory interface. 1W Internal Solar. (Hosting and setup fees included for the first 12 months).
Product code: IC-ML417ADS-PV
The MLN417 is a flexible, powerful RTU which feature a 4G modem for transmission of data over the mobile data network either Telstra's 700 MHz 4G or Vodafone's 900 MHz 4G service. Includes
$1,610.00
AUD + GST
$1,771.00
AUD Inc. GST
HOBO USB Micro Station Data Logger - IC-H21-USB
Product code: IC-H21-USB
Rugged and compact, the redesigned HOBO USB Micro Station is a weatherproof data logger for multi-channel monitoring of micro climates. Compatible with HOBO Smart Sensors
$586.00
AUD + GST
$644.60
AUD Inc. GST
2 in stock
Hobo Temperature Probe with 1,8m Lead - TMC6-HD
Product code: TMC6-HD
Hobo Temperature Probe with 1.8m Lead
$105.00
AUD + GST
$115.50
AUD Inc. GST
CB37 Terminal Board
Product code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$154.81
AUD + GST
$170.29
AUD Inc. GST
LJTick RelayDriver
Product code: IC-LJTick-RelayDriver
Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs into the standard DIO/DIO/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Each DIO controls a switch to ground (i.e. open-collector) that can hold off up to 50 volts and can sink up to 200 mA.
$35.00
AUD + GST
$38.50
AUD Inc. GST
RB12 Relay Board
Product code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$290.50
AUD + GST
$319.55
AUD Inc. GST
PS12DC Power Switching Board
Product code: IC-PS12DC
Controlled through 12 digital outputs, the PS12DC can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector presented on all compatible devices, and toggle the states of the EIO and CIO digital output lines to turn the switches on/off.
$219.00
AUD + GST
$240.90
AUD Inc. GST
Mux80 AIN Expansion Board
Product code: IC-Mux80
Analog input expansion board that adds 80 analog input channels. It can be connected to a U6, UE9, or T7 directly through the DB37 connector.
$339.00
AUD + GST
$372.90
AUD Inc. GST
CB15 Terminal Board
Product code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$95.09
AUD + GST
$104.60
AUD Inc. GST
B-513 Logic Input/Output cable, 2 metres in length, bare wire end - IC-B-513
Product code: IC-B-513
B-513 Logic Input/Output cable, 2 metres in length, bare wire end.
$175.00
AUD + GST
$192.50
AUD Inc. GST
U12-PH USB Multifunction Data Acquisition Device (OEM, PCB Only)
Product code: IC-U12-PH
The U12-PH has pin-headers installed (component side) instead of screw-terminals, and the LED is mounted on the component side. Ships with the populated PCB only.
$367.00
AUD + GST
$403.70
AUD Inc. GST
LJTick CurrentShunt
Product code: IC-LJTick-CurrentShunt
The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.
$120.00
AUD + GST
$132.00
AUD Inc. GST
LJTick DAC
Product code: IC-LJTick-DAC
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T7, T4) and any UD family device (U3/U6/UE9).
$179.00
AUD + GST
$196.90
AUD Inc. GST
LJTick DigitalOut5V
Product code: IC-LJTick-DigitalOut5V
Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a 5V logic device.
$49.00
AUD + GST
$53.90
AUD Inc. GST
LJTick InAmp
Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$184.00
AUD + GST
$202.40
AUD Inc. GST
LJTick InBuff
Product code: IC-LJTick-InBuff
Very low bias current (1pA) input buffer which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7, T4) have typical bias currents on the order of 20 nA, which is quite low, but the LJTick-InBuff reduces that dramatically.
$89.00
AUD + GST
$97.90
AUD Inc. GST
LJTick LVDigitalIO
Product code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick OutBuff
Product code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick Proto
Product code: IC-LJTick-Proto
The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Includes 3 loose pieces: the PCB, a 4-position screw terminal, and a right-angle pin header.
$20.00
AUD + GST
$22.00
AUD Inc. GST
CB25 Terminal Board
Product code: IC-CB25
Provides screw terminal connections for the LabJack U12's 16 extra digital I/O. A screwdriver and DB25 cable are included. For the LabJack U12 only.
$89.00
AUD + GST
$97.90
AUD Inc. GST
GL980 Data Logger
Product code: GL980
High speed general purpose data logger with 7" colour display with eight analogue channels.
$4,850.00
AUD + GST
$5,335.00
AUD Inc. GST