Moisture Meters

Per page:  
Display:  

Product code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
$450.00 AUD + GST
$495 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-MEP
Building moisture inspection tool without causing any damage. - Non-destructive moisture measurements - Wood/timber, drywall/roofing & plaster/brick - Exclusive extra 1 year warranty!
$581.82 AUD + GST
$640 AUD Inc. GST
in stock icon
5 in stock info icon
each

Product code: ICZD06
The pH and Moisture Meter allows users to quickly and easily determine the levels of pH and moisture in their soil. - pH range of 3.0 to 8.0 - 30cm long probe
$99.00 AUD + GST
$108.9 AUD Inc. GST
in stock icon
55 in stock info icon
each

Product code: IC-T660
Professional hand-held measuring device for the quick, non-destructive determination of moisture distributions in near-surface areas
$450.00 AUD + GST
$495 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 3-4 weeks, call 1300 737 871 to confirm
each

Product code: IC-12010
The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building and insulating materials up to 25 mm in thickness.
$376.00 AUD + GST
$413.6 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!
$686.36 AUD + GST
$755 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: 0560-6060
Moisture meter displays in percent by weight using stored material characteristic curves. - For wood and building materials - Pin type mositure meter - Calibration protocol included
$153.00 AUD + GST
$168.3 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1-2 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: Wile-65
The Wile 65 measures the moisture of grain and seeds rapidly and precisely and is easy to use dueto its menu driven display
$690.00 AUD + GST
$759 AUD Inc. GST
in stock icon
7 in stock info icon
each

Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
$827.27 AUD + GST
$910 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: IC-T-350
Aquaterr Soil Moisture Meter - Moisture and Temperature in C
$2,399.00 AUD + GST
$2638.9 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 4-6 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: T510
The T510 is a professional hand-held measuring device for the exact determination of wood and material moisture content according to the resistance measuring method. - Wood & material moisture with one device - Auto-calibration function
$400.00 AUD + GST
$440 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: PMS-714
The Soil Moisture Meter has been designed for an easy and accurate one step approach. - Heavy-duty 20cm probe. - IP65 water resistance - With 2 year extended warranty!
$369.00 AUD + GST
$405.9 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
$900.00 AUD + GST
$990 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: 0560-6062
In addition to material moisture, testo 606-2 also measures air humidity and temperature. - Measures a wide variety of materials - Stored characteristic curves - Includes wrist strap and belt holder
$278.00 AUD + GST
$305.8 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-WILE-78
"The Crusher", measures moisture in over 20 grains and seeds specific to each countryspecific to each country
$850.00 AUD + GST
$935 AUD Inc. GST
in stock icon
8 in stock info icon
each

Product code: IC-MB90
Ideal for routine moisture analysis applications, the MB90's halogen heating begins to dry samples in seconds and performs up to 40% faster than traditional infrared methods.
$3,895.00 AUD + GST
$4284.5 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-WILE-200
The Wile 200 measures the moisture, test weight and temperature of grain and seeds rapidly, precisely and easily with a convenient to use menu driven display.
$990.00 AUD + GST
$1089 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-MPKit-406B
For portable and convenient measurement of volumetric soil moisture content in sports fields, irrigation monitoring, mine sites, and landfills. - Stainless steel sensors - Has memory, download cable & software - Not affected by temperature
$1,999.00 AUD + GST
$2198.9 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 1 week, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: AGFH0010
Hay and Straw moisture tester (50cm) for moisture level & temp. of baled hay and straw, and indicative moisture levels in silage. - Robust construction, high-quality materials - Display updates during measurements
$629.00 AUD + GST
$691.9 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-M-350
Aquaterr Soil Moisture Meter - Moisture Only
$2,199.00 AUD + GST
$2418.9 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$727.27 AUD + GST
$800 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 964 137 (NZ 0800 600 167 to confirm.
each

Product code: WDZK5.2
A compact kit for testing moisture in concrete per AS 1884 - 2012 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Water Damage Restoration EZ Kit comes in a Tramex Easy-travel case.
$1,318.18 AUD + GST
$1450 AUD Inc. GST
in stock icon
This item has been discontinued, please call 1300 964 137 to discuss an alternative.
each

Product code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
$850.00 AUD + GST
$935 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-4 business days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-9630
The Klima 20 data logger is a mobile storage unit for recording air temperature and air humidity data and is specifically designed to be used for long-term monitoring.
$353.00 AUD + GST
$388.3 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: 0560-6160-Kit
The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials. With waterproof hard carry case!
$653.00 AUD + GST
$718.3 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: RWS
A Multi-Mode, Hand Held, Non-Destructive Moisture Detection instrument for Deep Moisture Scanning, Surveying, and Leak Tracing in the building envelope.
$1,927.27 AUD + GST
$2120 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 7-10 business days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: Wile-500
Wile 500 is a modern, precise and durable moisture and temperature meter for baled hay, haylage, straw and silage -Wide moisture measuring range depending on the material being measured: 8-80%. -The automatic density compensation system assesses the density of the bale, thus significantly improving the precision level of moisture content results. -Automatic moisture result updates each time the probe is pushed forward.
$499.00 AUD + GST
$548.9 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: Wile-55
Wile 55 is a basic tool for measuring moisture content in grains and seeds. The meter is best suited for performing rapid field measurements. - Measures moisture levels of 16 different grains - Outer structure of the Wile 55 is metallic which makes it durable against external impacts. - Wide moisture range: grain 8-35%, Oil seeds: 5-25%.
$499.00 AUD + GST
$548.9 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: BM22WP
The appSensor BM22WP is an electronic moisture indicator permitting measurements of wood and building moisture according to the resistance measuring method when used in combination with the MultiMeasure Mobile app. The measuring device BM22WP is immediately ready for use, it can be connected to the app without the slightest effort and permits the quick and easy detection of near-surface moisture in different materials.
$120.00 AUD + GST
$132 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 3-4 weeks, call 1300 964 137 (NZ 0800600167) to confirm.
each

Product code: BM31WP
The appSensor BM31WP is an electronic moisture indicator that enables you to capacitive determine moisture on the close to surface of wall, ground or ceiling non-destructively in combination with MultiMeasure Mobile App.
$270.00 AUD + GST
$297 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 3-4 weeks, call 1300 964 137 (NZ 0800600167) to confirm.
each