Hobo Weather Station Accessories

Product Code: IC-S-RGF-M002

A Low cost Rain Gauge for HOBO Smart Sensor Data Loggers

Product Code: IC-S-WCF-M003

A Low cost Wind Speed and Direction for HOBO Smart Sensor Data Loggers

Product Code: M-TPA-KIT

This kit has everything you need for a 3-meter tripod configuration of the HOBO Weather Station or HOBO Micro Station. With 2 Year Extended Warranty!

Product Code: RX3000

The HOBO RX3000 is Onset's next-generation remote data logging station that provides instant access to site-specific environmental data anywhere, anytime via the internet. With 2 Year Extended Warranty!

Product Code: S-VIA-CM14

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a Hobo smart sensor with compatible data loggers.

Product Code: S-CIA-CM14

The 12-bit 4-20 mA Input Adapter interfaces with any sensor providing a 4-20 mA signal to connect to Hobo smart sensor compatible data loggers

Product Code: IC-T-MAG-SPT-300

The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage.

Product Code: IC-T-MAG-SPT-600

The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage.

Product Code: IC-S-LWA-M003

The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating.

Product Code: IC-M-MLA

Mast Level.

Product Code: IC-S-RGB-M002

This Rain Gauge Smart Sensor measures rainfall with intensity up to 12.7 cm per hour with a resolution of 20 mm, and 1% accuracy for rainfall rates up to 0.2 mm/hour. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable.

Product Code: IC-T-VER-AH02

Single phase fuse kit cable for use with the E50B2.

Product Code: IC-U26-CAL-SOL

Sodium Sulfite solution (500 mL) is used for calibrating the HOBO Dissolved Oxygen Logger at 0% saturation, which is optional.

Product Code: IC-U20-CASE-1

A hard-sided case with foam inserts that holds four HOBO Water Level Data Loggers and an Optic USB Base Station or Waterproof Shuttle.

Product Code: IC-S-EXT-CASE2

A 6.5-inch long, Xenoy weatherproof housing that protects the connection between sensors and sensor extension cables.

Product Code: S-SMC-M005

Measure soil water content with the affordably-priced Soil Moisture Smart Sensor; this sensor integrates the field-proven ECH2O Sensor and a 12-bit A/D, providing +-2% accuracy with soil-specific calibration

Product Code: M-MKA

Micro Station Mast Mounting Kit for H21-002 Micro station loggers. With 2 Year Extended Warranty!

Product Code: S-LIA-M003

The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis

Product Code: S-LIB-M003

The Solar Radiation Smart Sensor is a light sensor (silicon pyranometer) with a measurement range of 0 to 1280 W/m2 over a spectral range of 300 to 1100 nm

Product Code: CTV-E

0 - 600 Amp split-core AC current sensor

Product Code: S-RGB-M002

This Rainfall Smart Sensor (Metric system) measures up to 12.7 cm of rain per hour with a resolution of 0.2 mm, and a maximum of 4000 tips per interval

Product Code: S-THB-M002

Temperature/RH Smart Sensor (2m cable)

Product Code: S-THB-M008

Temperature/RH Smart Sensor (8m cable)

Product Code: S-TMB-M002

Temperature Smart Sensor (2m cable)

Product Code: S-TMB-M006

Temperature Smart Sensor (2m cable)

Product Code: S-WSB-M003

The Wind Speed Smart Sensor is a 3 cup anemometer with TEFLON bearings and hardened beryllium shaft designed to measure wind speed from 0 to 76 m/s

Product Code: S-WDA-M003

The Wind Direction Smart Sensor is a research-grade plug-and-play Hobo smart sensor for measuring and logging wind data.