Backorder Now, once ordered your item will dispatch before the 06th of July 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
$285.45 AUD Inc. GST
The TC1800 Tint-Chek window tint meter measure visible light transmittance (VLT) of automotive glass as well as any glass/film up to 1/4" or 6.5mm thick. The meter is perfect for checking the legality of tint applied to automotive windows.
Features:
No mechanical lever switches - The Tint-Chek is designed with no moving parts which results in tremendous reliability and durability. This also means you can slide the glass into the opening in any direction, with no concern for damaging the lever switch or scratching the surface of the glass being tested.
All Digital, micro-processor controlled electronics - The TC1800 takes high-speed measurements shown on the real-time display. No drifting of values, as the TC1800 locks on one accurate result. The instrument will also turn itself off after several minutes of non-use which helps conserve battery power.
Built for accuracy and reliability - The TC1800 uses clever patent-pending techniques to remove any ambient light conditions that may be changing in the testing environment. For instance, stray headlights and cloud cover have been known to negatively impact the performance of older VLT meters that are on the market today. The meter comes from the factory calibrated to a NIST traceable standard.
Slimmer, pocket-friendly size and larger display - The overall size of the product is only 5" x 2.5" x 1". Most existing models on the market are as big as 6" x 3.5" x 1.5" or larger. This reduction in size makes the product easier to carry, handle and store. The TC1800 is so thin it fits comfortably into a shirt pocket. It also makes the device easier to slip around tight edges of a car window that does not open as far.
Specifications
Wavelength: 550 Nanometers
Resolution: 1%
Accuracy: +/- 2 Percentage Points
Repeatability: 1 Percentage Point
Measurement range: 0 to 100% Light Transmission
Sample thickness: 0 to 0.25 inches (0 to 6.5 mm)
Minimum sample size: 1 inch x 1/2 inch (25 x 13 mm)
Operating temperature: -17C to +50C (0F to 122F)
Storage Temperature: -20C to +70C (-4F to 158F)
Testing time: 1 sec initial response
Light source: LED
Instrument dimensions: 5 x 2.5 x 1 inches (127 x 63.5 x 25.4 mm)
Power source: 9V battery (inlcluded)
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au