Tramex

Per page:  
Display:  

Product code: IC-MEP
Building moisture inspection tool without causing any damage. - Non-destructive moisture measurements - Wood/timber, drywall/roofing & plaster/brick - Exclusive extra 1 year warranty!
$581.82 AUD + GST
$640.00 AUD Inc. GST
in stock icon
39 in stock info icon
each

Product code: CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!
$686.36 AUD + GST
$755.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
$827.27 AUD + GST
$910.00 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
$900.00 AUD + GST
$990.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: ME5
The Tramex Moisture Encounter is a Dual-Depth, non-destructive moisture meter for instant moisture measurement and evaluation. Deep Depth penetration up to 1.25 inches (30mm) and Shallow Depth penetration up to 0.40 inches (10mm).
$713.64 AUD + GST
$785.00 AUD Inc. GST
in stock icon
5 in stock info icon
each

Product code: CMEX5
The Tramex Concrete Moisture Encounter X5 – CMEX5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing an instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.
$1,172.73 AUD + GST
$1,290.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds.
$781.82 AUD + GST
$860.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$727.27 AUD + GST
$800.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: CCIK
Complete moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for coatings application with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 built-in hygrometer.
$1,445.45 AUD + GST
$1,590.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: CDIK
The complete kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. - Includes the Tramex CMEX5 digital concrete moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. - The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 100mm, Diameter 19mm. -Also reusable plug-in Hygro-i2 RH probes for in-situ testing of concrete - Comes with an infrared surface thermometer gives surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer.
$2,672.73 AUD + GST
$2,940.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: CDTK
A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. -Includes the Tramex CMEX5 digital concrete moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. -The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 100mm, Diameter 19mm.
$2,072.73 AUD + GST
$2,280.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: CDK
The Tramex Concrete Determinator extends the capabilities of the Tramex Concrete Moisture Encounter range, the CME5, CMEX5 and older meters CME4 and CMEX2, providing in-situ moisture content readings for concrete. -Measures moisture content in both the top 20mm layer and within the body of concrete floors and slabs down to an extendable depth of up to 100mm. -Includes Tramex Concrete Determinator, concrete moisture probe, and carrying case.
$1,136.36 AUD + GST
$1,250.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 3-4 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: FIK
Complete moisture meter kit for measuring moisture content, relative humidity and dew-point of concrete floors and slabs for flooring with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -Plug-in reusable Tramex Hygro-I2 RH probes for relative humidity readings in concrete slabs and heavy-duty wood pin-probe for measuring wood moisture. -An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer.
$2,000.00 AUD + GST
$2,200.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: RWS
A Multi-Mode, Hand Held, Non-Destructive Moisture Detection instrument for Deep Moisture Scanning, Surveying, and Leak Tracing in the building envelope.
$1,927.27 AUD + GST
$2,120.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: PTMMK5.1
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials.
$1,045.45 AUD + GST
$1,150.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: PTM2
The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products.
$618.18 AUD + GST
$680.00 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: FZK5.2
A compact kit for instant and precise moisture testing of wood flooring, concrete and other floor screeds. -Includes the Tramex CMEX II digital moisture meter for non-invasive testing of concrete. -Comes with Hygro-i2 ® relative humidity probe for testing relative humidity, temperature and dew point in the environment.
$1,672.73 AUD + GST
$1,840.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: DL-RHTX
The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. -Use the Tramex Feedback Data Logger App to visualize live readings, thermal conditions and psychrometric charts, as well as creating and exporting spreadsheets, charts and reports. -Can also measure relative humidity, temperature, dew point and humidity ratio in structural materials using optional probes.
$350.00 AUD + GST
$385.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: RMK
Master kit centered on a non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: - The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex Roof Master Kit is used to perform ASTM D7954. - The Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing.
$13,272.73 AUD + GST
$14,600.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: RIK
Non destructive flat roof scanner for leak detection, tracing and moisture measuring and surveying with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -Hand held electrode with 200mm insulated pins and 260mm narrow RH probe.
$4,363.64 AUD + GST
$4,800.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: BSMK5.1
Ultimate moisture meter kit for moisture and humidity surveying of buildings and building materials. Includes: -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex RWS Roof & Wall Scanner allows for for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. -An Ambient Relative Humidity Hygro-i2 Short Probe and a heavy-duty pin-type wood probe.
$3,409.10 AUD + GST
$3,750.01 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: BSIK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe. -Infrared surface thermometer.
$1,772.73 AUD + GST
$1,950.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: BSIZK5.1
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -The Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. -Ambient Relative Humidity Hygro-i2 Short Probe.
$1,281.82 AUD + GST
$1,410.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: CCTK
Compact Moisture Meter Kit For Measuring Moisture Content And Dew-point Of Concrete Floors And Slabs For Coatings Application with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -THe Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe. -The Tramex Contact Temperature Probe provides temperature readings of the floor surface.
$1,254.54 AUD + GST
$1,379.99 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: FTK
Compact moisture meter kit for measuring moisture content and dew-point of concrete floors and slabs for flooring installation with accompanying Bluetooth app. Includes: -The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content per ASTMF2659. -The Tramex Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in The environment.
$1,309.09 AUD + GST
$1,440.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: WDMK
Ultimate moisture meter kit for water damage restoration of buildings and building materials with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -Hygro-i2® Relative Humidity probe, heavy duty pins and insulated pins for wood moisture content.
$3,590.91 AUD + GST
$3,950.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: WDIK
Complete moisture meter kit for water damage restoration of buildings and building materials with accompanying Bluetooth app. Includes: -The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete per ASTMF2659. -The Tramex ME5 for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. -The Tramex Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe.
$3,000.00 AUD + GST
$3,300.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-FBSK5.1
The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device.
$544.55 AUD + GST
$599.01 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: IC-DL-RHTA
The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device.
$313.64 AUD + GST
$345.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each

Product code: FBZK5.1
The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. Designed for BS-8201, 8203, 5325 and ASTM F2170 applications.
$972.73 AUD + GST
$1,070.00 AUD Inc. GST
in stock icon
Backorder Now, this item will leave store in 1-2 weeks, call 1300 737 871 ( NZ 0800 737 871 ) to confirm
each