LabJack
U6-Pro USB Multifunction Data Acquisition Device
Product code: IC-U6-Pro
USB multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 20 digital I/O, 2 counters, and 4 timers. With additional 24-bit low-speed ADC for applications with higher resolution requirements.
$889.00
AUD + GST
$977.90
AUD Inc. GST
U6 Pro-OEM USB Multifunction Data Acquisition Device (No enclosure/screws)
Product code: IC-U6-Pro-OEM
The -OEM variant of the U6 Pro does not include the screw terminals or enclosure. Designed for direct integration into a larger product or platform.
$580.00
AUD + GST
$638.00
AUD Inc. GST
T7 USB or Ethernet Multifunction Data Acquisition Device
Product code: IC-T7
USB or Ethernet multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 23 digital I/O, and up to 10 digital counters/timers.
$820.00
AUD + GST
$902.00
AUD Inc. GST
T7-Pro-OEM USB or Ethernet Multifunction Data Acquisition Device (No enclosure/connectors)
Product code: IC-T7-Pro-OEM
All the features of the T7-Pro, but does not include the connectors, or enclosure. Designed for direct integration into a larger product or platform.
$1,110.00
AUD + GST
$1,221.00
AUD Inc. GST
CB15 Terminal Board
Product code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$60.00
AUD + GST
$66.00
AUD Inc. GST
CB37 Terminal Board
Product code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$109.00
AUD + GST
$119.90
AUD Inc. GST
U12-PH USB Multifunction Data Acquisition Device (OEM, PCB Only)
Product code: IC-U12-PH
The U12-PH has pin-headers installed (component side) instead of screw-terminals, and the LED is mounted on the component side. Ships with the populated PCB only.
$367.00
AUD + GST
$403.70
AUD Inc. GST
RB12 Relay Board
Product code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$290.50
AUD + GST
$319.55
AUD Inc. GST
LJTick InAmp
Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$184.00
AUD + GST
$202.40
AUD Inc. GST
LJTick LVDigitalIO
Product code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick OutBuff
Product code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LM34CAZ Silicon Temperature Sensor
Product code: IC-LM34CAZ
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.
$25.00
AUD + GST
$27.50
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
$36.50
AUD + GST
$40.15
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
UE9-Pro USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet.
Product code: IC-UE9-Pro
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities. The UE9-Pro has all the features of the the normal UE9; with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC for applications with higher resolution requirements.
$1,728.00
AUD + GST
$1,900.80
AUD Inc. GST
UE9 USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet
Product code: IC-UE9
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities.The UE9 is a USB or Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, up to 2 counters, and up to 6 timers.
EB37 Experiment Board
Product code: IC-EB37
Just like any breadboard, the EB37 is very useful for testing and validating electronic designs, but it also has a few different power supply rail voltages and breaks out LabJack I/O right next to your design.