Menu
Speak to a scientist 1300 737 871
Need help? Call our scientists & select with confidence.
1300 737 871 Need help? Call our scientists & select with confidence.
Cart

Products

  • T4 USB or Ethernet Multifunction Data Acquisition Device

    Product Code: IC-T4

    USB or Ethernet multifunction DAQ device with up to 12 analog inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers.

    $351.00 AUD + GST
    $386.10 AUD Inc. GST
    2 in stock
  • T7 USB or Ethernet Multifunction Data Acquisition Device

    Product Code: IC-T7

    USB or Ethernet multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 23 digital I/O, and up to 10 digital counters/timers.

    $710.00 AUD + GST
    $781.00 AUD Inc. GST
    1 in stock
  • T7-Pro USB or Ethernet Multifunction Data Acquisition Device

    Product Code: IC-T7-Pro

    The T7-Pro has all the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC.

    $865.00 AUD + GST
    $951.50 AUD Inc. GST
    1 in stock
  • U12 USB Multifunction Data Acquisition Device

    Product Code: IC-U12

    USB DAQ device with 8 analog inputs(12-bit), 2 analog outputs(10-bit), 20 digital I/O, and a 32-bit counter.

    $273.00 AUD + GST
    $300.30 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U3-HV USB Data Acquisition Device

    Product Code: IC-U3-HV

    USB DAQ device with 4 dedicated high-voltage analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.

    $227.00 AUD + GST
    $249.70 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U3-LV USB Data Acquisition Device

    Product Code: IC-U3-LV

    USB DAQ device with 16 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 20 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.

    $221.00 AUD + GST
    $243.10 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U6 USB Multifunction Data Acquisition Device

    Product Code: IC-U6

    USB multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 20 digital I/O, 2 counters, and 4 timers.

    $538.00 AUD + GST
    $591.80 AUD Inc. GST
    2 in stock
  • U6-Pro USB Multifunction Data Acquisition Device

    Product Code: IC-U6-Pro

    USB multifunction DAQ device with 14 analog inputs (16- to 18- bit), 2 analog outputs (12-bit), 20 digital I/O, 2 counters, and 4 timers. With additional 24-bit low-speed ADC for applications with higher resolution requirements.

    $647.00 AUD + GST
    $711.70 AUD Inc. GST
    1 in stock
  • UE9 USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet

    Product Code: IC-UE9

    The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities.The UE9 is a USB or Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, up to 2 counters, and up to 6 timers.

    $849.00 AUD + GST
    $933.90 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • UE9-Pro USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet.

    Product Code: IC-UE9-Pro

    The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities. The UE9-Pro has all the features of the the normal UE9; with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC for applications with higher resolution requirements.

    $1010.00 AUD + GST
    $1111.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • T4-OEM USB or Ethernet Multifunction Data Acquisition Device (No enclosure/connectors)

    Product Code: IC-T4-OEM

    All the features of the T4, but does not include the connectors, or enclosure. Designed for direct integration into a larger product or platform.

    $305.00 AUD + GST
    $335.50 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • T7-OEM USB or Ethernet Multifunction Data Acquisition Device (No enclosure/connectors)

    Product Code: IC-T7-OEM

    All the features of the T7, but does not include the connectors, or enclosure. Designed for direct integration into a larger product or platform.

    $600.00 AUD + GST
    $660.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • T7-Pro-OEM USB or Ethernet Multifunction Data Acquisition Device (No enclosure/connectors)

    Product Code: IC-T7-Pro-OEM

    All the features of the T7-Pro, but does not include the connectors, or enclosure. Designed for direct integration into a larger product or platform.

    $756.00 AUD + GST
    $831.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U12-NTH USB Multifunction Data Acquisition Device (OEM, PCB Only)

    Product Code: IC-U12-NTH

    The U12-NTH does not have any through-hole components installed. Same features as the U12. Ships with the populated PCB only

    $211.00 AUD + GST
    $232.10 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U12-PH USB Multifunction Data Acquisition Device (OEM, PCB Only)

    Product Code: IC-U12-PH

    The U12-PH has pin-headers installed (component side) instead of screw-terminals, and the LED is mounted on the component side. Ships with the populated PCB only.

    $227.00 AUD + GST
    $249.70 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U3-HV-OEM USB Data Acquisition Device (No enclosure/screws)

    Product Code: IC-U3-HV-OEM

    The -OEM variant of the U3-HV does not include the screw terminals or enclosure. Designed for direct integration into a larger product or platform.

    $173.00 AUD + GST
    $190.30 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U3-LV-OEM USB Data Acquisition Device (No enclosure/screws)

    Product Code: IC-U3-LV-OEM

    The -OEM variant of the U3-LV does not include the screw terminals or enclosure. Designed for direct integration into a larger product or platform.

    $168.00 AUD + GST
    $184.80 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U6 Pro-OEM USB Multifunction Data Acquisition Device (No enclosure/screws)

    Product Code: IC-U6 Pro-OEM

    The -OEM variant of the U6 Pro does not include the screw terminals or enclosure. Designed for direct integration into a larger product or platform.

    $476.00 AUD + GST
    $523.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • U6-OEM USB Multifunction Data Acquisition Device (No enclosure/screws)

    Product Code: IC-U6-OEM

    The -OEM variant of the U6 does not include the screw terminals or enclosure. Designed for direct integration into a larger product or platform.

    $476.00 AUD + GST
    $523.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • CB15 Terminal Board

    Product Code: IC-CB15

    Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.

    $96.00 AUD + GST
    $105.60 AUD Inc. GST
    3 in stock
  • CB25 Terminal Board

    Product Code: IC-CB25

    Provides screw terminal connections for the LabJack U12's 16 extra digital I/O. A screwdriver and DB25 cable are included. For the LabJack U12 only.

    $106.00 AUD + GST
    $116.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • CB37 Terminal Board

    Product Code: IC-CB37

    Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.

    $118.00 AUD + GST
    $129.80 AUD Inc. GST
    3 in stock
  • EB37 Experiment Board

    Product Code: IC-EB37

    Just like any breadboard, the EB37 is very useful for testing and validating electronic designs, but it also has a few different power supply rail voltages and breaks out LabJack I/O right next to your design.

    $257.00 AUD + GST
    $282.70 AUD Inc. GST
    0 in stock
  • EI1022 Temperature Probe

    Product Code: IC-EI1022

    Easy to use and inexpensive temperature probe from Electronic Innovations Corp. Features a plastic probe, a high-level linear output of 10 mV per degree K, a typical accuracy of +/- 1 degrees C (+/- 1.8 degrees F) at room temperature, and a range of -40 to +100 degrees C (-40 to +212 degrees F).

    $149.00 AUD + GST
    $163.90 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • EI1034 Temperature Probe

    Product Code: IC-EI1034

    Easy to use and very accurate temperature probe from Electronic Innovations Corp. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of +/- 0.4 degrees F (+/- 0.22 degrees C) at room temperature, and a range of 0 to +230 degrees F (-17 to +110 degrees C, with U3/UE9).

    $149.00 AUD + GST
    $163.90 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • EI1050 Digital Temperature/Humidity Probe

    Product Code: IC-EI1050

    Uses two digital lines on any LabJack to retrieve temperature and relative humidity measurements. Featuring the Sensirion SHT11 sensor, it provides 14-bit temperature readings and 12-bit humidity readings. An enable line is provided to allow multiple EI-1050 probes to be connected to a single LabJack.

    $191.00 AUD + GST
    $210.10 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack DB15 Cable (6 ft)

    Product Code: IC-DB15

    LabJack DB15 Cable (6 ft)

    $58.00 AUD + GST
    $63.80 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack DB25 Cable (3ft)

    Product Code: IC-DB25

    LabJack DB25 Cable (3ft)

    $58.00 AUD + GST
    $63.80 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack DB37 Cable (3 ft)

    Product Code: IC-DB37

    A three foot DB37 cable, useful for connections between the Mux80 and CB37 Terminal Board(s). Also can be used to connect a U6, UE9, or T7 to a CB37 or Mux80.

    $66.00 AUD + GST
    $72.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack Ethernet Cable

    Product Code: IC-LabJackEthernetCable

    LabJack LabJack Ethernet Cable

    $50.00 AUD + GST
    $55.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack T7 Power Supply

    Product Code: IC-T7 Power

    LabJack T7 Power Supply

    $65.00 AUD + GST
    $71.50 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack TKAD DIN Clip

    Product Code: IC-TKADDIN

    LabJack TKAD DIN Clip

    $50.00 AUD + GST
    $55.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack UE9 Power Supply

    Product Code: IC-UE9Power

    LabJack UE9 Power Supply

    $70.00 AUD + GST
    $77.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack Ultima 5m USB Cable

    Product Code: IC-LabJackUltima

    LabJack Ultima 5m USB Cable

    $72.00 AUD + GST
    $79.20 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LabJack USB Cable

    Product Code: IC-LabJackUSBCable

    LabJack USB Cable

    $40.00 AUD + GST
    $44.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick CurrentShunt

    Product Code: IC-LJTick-CurrentShunt

    The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.

    $116.00 AUD + GST
    $127.60 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick DAC

    Product Code: IC-LJTick-DAC

    Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T7, T4) and any UD family device (U3/U6/UE9).

    $178.00 AUD + GST
    $195.80 AUD Inc. GST
    2 in stock
  • LJTick DigitalOut5V

    Product Code: IC-LJTick-DigitalOut5V

    Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a 5V logic device.

    $78.00 AUD + GST
    $85.80 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick Divider

    Product Code: IC-LJTick-Divider

    The LJTick-Divider (LJTD) is a signal conditioning module designed to take two single-ended higher voltage analog signals, and divide them by a specified value.

    $83.00 AUD + GST
    $91.30 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick InAmp

    Product Code: IC-LJTick-InAmp

    Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.

    $150.00 AUD + GST
    $165.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick InBuff

    Product Code: IC-LJTick-InBuff

    Very low bias current (1pA) input buffer which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7, T4) have typical bias currents on the order of 20 nA, which is quite low, but the LJTick-InBuff reduces that dramatically.

    $120.00 AUD + GST
    $132.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick LVDigitalIO

    Product Code: IC-LJTick-LVDigitalIO

    A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.

    $73.00 AUD + GST
    $80.30 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick OutBuff

    Product Code: IC-LJTick-OutBuff

    Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.

    $83.00 AUD + GST
    $91.30 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick Proto

    Product Code: IC-LJTick-Proto

    The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Includes 3 loose pieces: the PCB, a 4-position screw terminal, and a right-angle pin header.

    $58.00 AUD + GST
    $63.80 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick RelayDriver

    Product Code: IC-LJTick-RelayDriver

    Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs into the standard DIO/DIO/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Each DIO controls a switch to ground (i.e. open-collector) that can hold off up to 50 volts and can sink up to 200 mA.

    $65.00 AUD + GST
    $71.50 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick Resistance

    Product Code: IC-LJTick-Resistance

    The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This tick gives users a regulated 2.5V signal that can be used as a excitation voltage and a known resistance value in series with a sensor input line. This gives users the ability to calculate the resistance of their connected sensor.

    $95.00 AUD + GST
    $104.50 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LJTick VRef

    Product Code: IC-LJTick-VRef

    The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V or 4.096V signal. These ticks are commonly used as an excitation voltage for various circuits. The IOA and IOB lines are pass-through terminals, and do not interact with the accessory in any way. Available in two models.

    $87.00 AUD + GST
    $95.70 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • LM34CAZ Silicon Temperature Sensor

    Product Code: IC-LM34CAZ

    The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.

    $61.00 AUD + GST
    $67.10 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • Mux80 AIN Expansion Board

    Product Code: IC-Mux80

    Analog input expansion board that adds 80 analog input channels. It can be connected to a U6, UE9, or T7 directly through the DB37 connector.

    $309.00 AUD + GST
    $339.90 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
  • PS12DC Power Switching Board

    Product Code: IC-PS12DC

    Controlled through 12 digital outputs, the PS12DC can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector presented on all compatible devices, and toggle the states of the EIO and CIO digital output lines to turn the switches on/off.

    $190.00 AUD + GST
    $209.00 AUD Inc. GST
    Backorder now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
1 2 Next