SM150-HH2 Soil Moisture Kit with HH2 Meter - SM150-HH2
Order Me In, Once ordered this item will likely dispatch before the 15th of April 2026, call 1300 737 871 (NZ 0800 737 871) to confirm.
- - Complete low-cost kit
- - ± 3% accuracy
- - Includes SM150T Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case.
$2,436.11 AUD Inc. GST
The kit comprises an SM150T* Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case. The cable and connector are watertight – an essential requirement for potentially wet environments.
The HH150 Meter displays volumetric water content (% volume). Please note that although the SM150T Sensor has a built-in temperature sensor, the HH150 Moisture Meter does not measure or display temperature. It is lightweight and is very easy to use, being a readout-only device (no data recording or PC complications). Operation is simple – just insert the SM150T into the soil or substrate and press the Read button to make a reading.
The SM150 Kit comes with substrate calibrations for mineral, peat mix, coir, mineral wool and perlite (plus also provides raw voltage output) – providing a rapid, rugged solution for checking the uniformity of growing conditions for many types of growing media.
The SM150T is easy to insert and install – its sharp pins minimise soil disturbance and preserve the original soil structure around the measurement rods.
Specifications
SM150:
- Measurement: Volumetric water content and soil temperature
- Accuracy: ± 0.03 m3.m-3 (3%)
- With soil-specific calibration: ± 0.5°C (0 to 40°C for temp sensor) / ± 0.75°C (-20 to +60°C for temp sensor)
- Soil moisture measurement range: Full accuracy over 0 to 0.7 m3.m-3 / Full range up to 1.0 m3.m-3
- Salinity range: 50 to 500 mS.m-1
- Salinity errors: < 0.035 m3.m-3 from 0.05 to 0.4 m3.m-3. Can be calibrated up to 2000 mS.m-1
- Temperature range: Full accuracy over: 0 to 40°C
- Output: 0 to 1.0 V differential corresponding to 0 to ~0.6 m3.m-3
- Resistance: 5.8Ω to 28Ω for temp sensor
- Power requirement: 5-14 V, ~18 mA for 1s. Minimum 5 V with 100 m cable
- Environmental: IP68 (-40 to +70°C)
- Sample volume: ~55 x 70 mm diameter. Sample volume is weighted towards soil immediately surrounding the rods
- Dimensions and weight: Overall: 143 x 40 mm diameter / Rods: 51 mm x 2.5 mm diameter
- Weight: 0.1 kg (exc. cable)
- Sensor calibrations: Individual sensors are interchangeable. Recalibration advised every 3 years (depending on use)
- Soil calibrations: Mineral, peat mix, coir, mineral wool, perlite - and also raw voltage output
HH150 Meter:
- Accuracy: 0.5% of full scale over 5-40 °C (±7.5mV – negligible effect on SM150 accuracy)
- Resolution: 0.1% of voltage reading
- Battery life/standby life: 2 x GP alkaline AAA/ 10000 readings/1 year
- Environmental: Non-condensing
- Compliance: CE, FCC & ROHS
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au