PoE•X Duct Temperature Sensor

ORDER ME IN
Product code: MNS-P-C1-TS-DT-L08

Order Me In, once ordered this item will likely dispatch before the 20th of August 2025, call 1300 737 871 (NZ 0800 737 871) to confirm.

The Power-over-Ethernet (PoE) Duct Temperature Sensor uses an NTC thermistor with 8 ft. lead wires to accurately measure temperatures in duct work, while maintaining a sealed environment. Can be easily installed and mounted for long term use. It is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the temperature probe, wait for temperature to stabilize, then transmit the temperature data to iMonnit.

Regular price $492.00 AUD + GST
$541.20 AUD Inc. GST
Note: Gateway required to operate this sensor
The Power-over-Ethernet (PoE) Duct Temperature Sensor uses an NTC thermistor with 8 ft. lead wires to accurately measure temperatures in duct work, while maintaining a sealed environment. Can be easily installed and mounted for long term use. It is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the temperature probe, wait for temperature to stabilize, then transmit the temperature data to iMonnit.
Features:
- Power-over-Ethernet ready (injector hardware required)
- Embedded LEDs for transmission and online condition indicators
- 50,000 sensor message memory (non-volatile)
- Modbus TCP & SNTP v1 interface capabilities
- No PC required (managed through apps and smart devices)
- Remote update capable w/automatic updates

Specifications

- Temperature Range: -75 to +400 C, +/- 1 C
- Accuracy at 25 C: +/- 1 C
- User Calibrated Accuracy: +/- 0.25 C
- Response Time: 20 seconds max
- Lead Wire Length: 96 in
- Communication Hardware: 10 / 100 Ethernet Controller
- PoE Requirements: Class 1 Device (500mW)
- IEEE Standard Compliance: 802.3AF-2003 / 802.3AT-2009 Class 1
- Operation: Full- and Half-Duplex
- Cross-Over Correction: Automatic MDI / MDI-X
- Protocols Supported: DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP
- Input Power: Supplemental Power Requirement
- Cable Connector: RJ45
- Supplementary Power Connector: 2.1 x 5.5 mm barrel jack, center positive
- Device Memory: Up to 50,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored.)
- Forced Communication / Reset Hardware: Button
- Operating Temperature: -20 to +60 C
- Storage Temperature: -20 to +85 C

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au