Kyoritsu | See more Clampmeters & Digital Multimeters

Kyoritsu 2009R AC/DC Digital Clamp Meter – 2000A

ORDER ME IN
Product code: 2009R

Order Me In, Once ordered this item will likely dispatch before the 23rd of September 2025, call 1300 737 871 (NZ 0800 737 871) to confirm.

The Kyoritsu 2009R clamp meter can measure the voltage and current in both very low and high power circuits and indicates accurate True RMS readings of AC current or voltage with distorted waveform. It can also measure AC and DC currents up to 2000A.

Read more

$1,519.09 AUD + GST
 $1,671.00 AUD Inc. GST
The Kyoritsu 2009R AC/DC Digital Clamp Meter has teardrop-shaped jaws for ease-of-use in accessing crowded cable areas and other tight situations. Its data hold function allows easy readings in dimly-lit or otherwise hard-to-read locations. The Kyoritsu 2009R provides a wide measuring range and takes True RMS readings of AC current or voltage with distorted waveform.
Features:
- CAT IV clampmeter measures voltage and current in both very low and high power circuits
- Accurate True RMS reading of AC current or voltage with distorted waveform
- Measures AC and DC currents up to 2000 A
- Provides frequency reading in AC current or voltage measurement
- Auto-ranging feature on current, voltage and resistance ranges
- Dynamic range of 4200 counts full scale
- Wide frequency range from 20 Hz to 1 kHz
- Easy continuity checking, with bleeper
- Average function for easy reading of input with large variation
- Peak function for measuring a peak of input
- Auto-null function for easy zero adjustment
- Provides recorder output for long hour monitoring
- Auto-power-off feature to conserve battery power
- 55mm diameter teardrop-shaped jaws
- Shrouded jaws enhance safety
- Terminal cover prevents use of incorrect terminal
- Dimensions 250 x 105 x 49 mm
- Weight 540 g approximately (including batteries)

Specifications

- AC A: 400.0/2000A +/- 1.3%rdg +/- 3dgt (0 - 400.0A, 150 - 1700A) (45 - 66Hz), +/- 2.0%rdg +/- 5dgt (0 - 400.0A, 150 - 1700A) (20Hz - 1kHz), +/- 2.3%rdg +/- 3dgt (1701 - 2000A) (45 - 66Hz)
- DC A: 400.0/2000A +/- 1.3%rdg +/- 2dgt
- AC V: 40.00/400.0/750V +/- 1.0%rdg +/- 3dgt (45 - 66Hz), +/- 1.5%rdg +/- 5dgt (20Hz - 1kHz)
- DC V: 40.00/400.0/1000V +/- 1.0%rdg2dgt
- Resistance: 400.0/4000 ohms +/- 1.5%rdg +/- 2dgt (Electronic protection (no fuse) up to 600V)
- Continuity buzzer: Buzzer sounds below 20 ohms
- Hz: 10.0 - 4000Hz +/- 1.5%rdg +/- 5dgt (Input sensitivity Current: more than 40AVoltage: more than 10V)
- Conductor size: 55mm diameter max.
- Output Recorder: DC400mV against AC/DC400.0A, DC200mV against AC/DC2000A
- Applicable standards: IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2, IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1
- Power source: R6 (1.5V) x 2
- Dimensions: 250(L) x 105(W) x 49(D)mm

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au