Hioki | See more Electronic Related Meters

DT4253 Digital Multimeter

ORDER ME IN
Product code: DT4253

Order Me In, Once ordered this item will likely dispatch before the 24th of October 2025, call 1300 737 871 (NZ 0800 737 871) to confirm.

The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth.

-Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (uA) with built in high-sensitivity current ranges.

-Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms).

-Dual display lets you check voltage and frequency simultaneously.

Read more

$499.40 AUD + GST
 $549.34 AUD Inc. GST
The DT4253, which is part of Hiokis DT4250 series of standard digital multimeters, is ideal for measuring instrumentation, air conditioning equipment, and gas-burning devices.
- DC current: 60.00 uA / 600.0 uA / 6.000 mA / 60.00 mA
- Temperature: -40.0 to 400.0 C
- Accepts an AC clamp sensor
Features:
- 600.00 uA range for measuring very low currents used by gas-burning devices
- The instrument can convert and display instrumentation signals of 4 to 20 mA or 0 to 20 mA representing properties such as temperature, pressure, and flow rate from a transducer or other device that converts sensor data into an electrical signal.
- Mistakenly measuring voltage using the current range may lead to a short-circuit. The DT4253 eliminates the root cause of such accidents by providing clamp-on sensor based current measurement functionality instead of using conventional probes.
- Measure output voltage on the secondary sides of inverters by eliminating harmonic components
- To ensure operators ability to use measuring instruments safely, IEC 61010 classifies the locations in which instruments are used into a series of safety-based measurement categories (ranging from CAT II to CAT IV). Using an instrument that does not satisfy the required safety level can lead to an electrical accident.

Specifications

- DC Voltage range: 600.0 mV to 1000 V, 5 ranges, Basic accuracy: +/- 0.3 % rdg. +/- 5 dgt.
- AC Voltage range: 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz. Basic accuracy 40 to 500 Hz : +/- 0.9 % rdg. +/- 3 dgt. (True RMS, crest factor 3)
- AUTO AC/DCV: Yes
- Resistance range: 600.0 ohms to 60.00 milliohms, 6 ranges, Basic accuracy: +/- 0.7 % rdg. +/- 5 dgt.
- DC Current range: 60.00 uA to 60.00 mA, 4 ranges, Basic accuracy: +/- 0.8 % rdg. +/- 5 dgt.
- From 4 to 20mA Percentage conversion display: Yes
- AC Current range (use with Clamp on probes): 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 to 1 kHz: +/- 0.9 % rdg. +/- 3 dgt. (True RMS, crest factor 3)
- Temperature (thermocouples) K: -40.0 to 400.0 C , Add the Temperature probe accuracy to basic accuracy: +/- 0.5 % rdg. +/- 2 C
- Capacitance range: 1.000 uF to 10.00 mF, 5 ranges, Basic accuracy: +/- 1.9 % rdg. +/- 5 dgt.
- Frequency range: 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Basic accuracy: +/- 0.1 % rdg. +/- 1 dgt.
- Continuity check: Continuity threshold [ON]: 25 ohms or less, [OFF]: 245 ohms or more, Response time: 0.5 ms or more
- Diode test: Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, Threshold of forward voltage: 0.15 V to 1.5 V
- Other functions: Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option), 4 to 20 mA percentage conversion
- Display: Main and Sub displays: 4 digits LCD, max. 6000 digits, bar graph. Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
- Power supply: LR03 alkaline batteries x4, Continuous use: 130 hours (backlight OFF)
- Dimensions and mass: 84 x 174 x 52 mm, 390 g (13.8 oz) (including batteries and holster)
- Accessories: Test lead L9207-10 x1, Holster x1, Instruction manual x1, LR03 alkaline battery x4
Insert your text here
Insert your text here
Insert your text here
Insert your text here
Insert your text here

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au