dBAir Safety Octave (1/1) Class 2 - IC-GA241SO
Backorder Now, once ordered your item will dispatch before the 21st of May 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).
$5,301.23 AUD Inc. GST
The Castle dBAir Sound Meter is the ideal instrument for performing noise measurements for compliance with The Control of Noise at Work Regulations 2005. The GA241SO is a class 2 meter that supports dual measurements, measuring two variables at the same time. It's hard wearing, easy to use and comes pre-set with templates for noise measurements, allowing you to get started straight away and not worry about complicated set-up procedures.
Octave Band analysis. This will allow you to analyse different frequencies in greater detail, and is a requirement to perform Octave Band hearing protection assessments.
This high value sound level meter provides Safety Managers and Noise Assessors the ideal noise assessing instrument for industrial noise.
Specifications
- Applicable Standards: IEC 61672-1:2013; IEC 61260-1:2014 (Where Octave Bands Fitted)
- IEC 61252:1993 amendment 1:2000 (Where Exposure Fitted)
- Microphone: Class 1.5 Pre-Polarised - Free Field (IEC) Pressure (ANSI) Sensitivity (50mV/Pa)
- Noise Floor (Typical): "A" Weighting less than 16.0dB; "C" Weighting less than 15.0dB; "Z", Weighting less than 25.0dB
- Measurement Ranges: 25 to 115dB (LOW); 50 to 140dB (HIGH)
- Frequency Weightings: A, C or Z
- Frequency Range: 1 Hz to 20 kHz (electrical characteristics); 12.5 Hz to 16 kHz (including microphone)
- Time Weighting: Slow, Fast, Impulse
- Display: 2.4" Full Colour TFT 240x320 pixels
- Dual Measurements: Simultaneous dual measurement with independent time and frequency weightings.
- Measurement parameters: LSPL, LEQ, LMAX, LMIN, Peak, LEPd, Exposure Points, Dose, Hearing Protector Calculator. 1/1 Octaves
- Octave Band Analysis: Where fitted 1/1 or 1/3 octave band analysis on measurement 1 only
- Dose, Hearing Protector Calculator; 1/1 octaves
- Languages: English UK, English US, Chinese, French, German, Italian, Portuguese, Brazilian, Russian, Spanish, Dutch, Greek
- Time History: Short Interval 10ms to 60m; Long Interval 1s to 24h; Smart Timer, Duration Timer or Interval Timer
- Memory: 16GB
- Input / Output Connection: Micro USB Type B
- Batteries: 4 x AA (1.5V)
- Battery Life: Up to 8 Hours continuous operation (screen settings dependent)
- Dimensions Including Pre-Amplifier: 210mm (H) x 70mm (W) x 30mm (D)
- Dimensions Excluding Pre-Amplifier: 145mm (H) x 70mm (W) x 30mm (D)
- Weight: 305g
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au