Home
>
PCE-EVSE 300 EV Test Instrument
The PCE-EVSE 300 is a multifunction EV tester designed for monitoring electric vehicles and charging stations.
-EV Test Instrument for charging plugs type 1 and 2.
-Direct acceptance of all connections via laboratory plugs.
Regular price
$869.80 AUD
+ GST
$956.78 AUD Inc. GST
$956.78 AUD Inc. GST
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often, measuring devices are already available to perform the required measurements. An EV test instrument is therefore required so that the measuring device can be connected to the charging station.
The EV test instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV test instrument. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EV test instrument has a shock-proof plug connection. The EV test instrument can be used to check the residual current device.
A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EV test instrument is equipped with corresponding simulators.
3 Year Warranty (2 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
Features:
- CP and PP simulation
- Transport bag included in delivery
- Direct connection for wallboxes
- Adapter with type 1 and type 2 charging plugs
- PE conductor test
- Integrated shock-proof socket
Specifications
Functions:
- PE test (protective conductor): available, error
- PP simulation (charging cable coding): open, 13 A, 20 A, 32 A, 63 A
- CP simulation (communication line): A, B, C, D, error
Outputs (only for test purposes):
- Measuring connections: L1, L2, L3, N, PE max. 250 / 430 V AC, 10 A laboratory plug
- Schuko connection: max. 250 V AC, 10 A
- Fuse from the Schuko connection: fuse F 10 A / 250 V, 5 x 20 mm
- CP signal output: +/- 12 V PWM
- Input voltage 1 phase: 250 V AC / 3 phase 430 V AC, 50 / 60 Hz, max. 10 A
Charging cable connector Type 1:
- AC charging mode 3, compatible with IEC62196-1
- Type 1 or SAE J1772 with vehicle connection (Type 1, 5 pin, 1-phase)
Charging cable connector Type 2:
- AC charging mode 3, compatible with IEC62196-2
- Type 1 or SAE J1772 with vehicle connection (Type 2, 7 pin, 3-phase)
Other specifications:
- Measurement category: CAT II 300 V
- Protection class: IP54
- Pollution degree: 2
- Operating conditions: 0 to 40 C / 10 to 85%RH, non-condensing
- Storage conditions: -10 to 50 C / 10 to 60% RH, non-condensing
- Maximum working height max.: 2000 m
- Dimensions (handheld only): 277 x 109 x 63 mm
- Weight: 1 kg
Insert your text here
Insert your text here
Our Reviews
Recently Viewed
Instrument Choice will respond in 3 business hours
Get in touch with our expert scientists Instrument Choice.
In less than 3 business hours you will have an answer from our expert scientists.
Our Australian experts have access to a huge range of products from national and international suppliers.
If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au