Hobo Temperature Probe with 1,8m Lead - TMC6-HD
Product code: TMC6-HD
Hobo Temperature Probe with 1.8m Lead
$105.00
AUD + GST
$115.50
AUD Inc. GST
B-513 Logic Input/Output cable, 2 metres in length, bare wire end - IC-B-513
Product code: IC-B-513
B-513 Logic Input/Output cable, 2 metres in length, bare wire end.
$175.00
AUD + GST
$192.50
AUD Inc. GST
CB15 Terminal Board
Product code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$60.00
AUD + GST
$66.00
AUD Inc. GST
CB37 Terminal Board
Product code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$109.00
AUD + GST
$119.90
AUD Inc. GST
U12-PH USB Multifunction Data Acquisition Device (OEM, PCB Only)
Product code: IC-U12-PH
The U12-PH has pin-headers installed (component side) instead of screw-terminals, and the LED is mounted on the component side. Ships with the populated PCB only.
$367.00
AUD + GST
$403.70
AUD Inc. GST
RB12 Relay Board
Product code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$290.50
AUD + GST
$319.55
AUD Inc. GST
LJTick InAmp
Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$184.00
AUD + GST
$202.40
AUD Inc. GST
LJTick LVDigitalIO
Product code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick OutBuff
Product code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$45.00
AUD + GST
$49.50
AUD Inc. GST
GL980 Data Logger
Product code: GL980
High speed general purpose data logger with 7" colour display with eight analogue channels.
$4,850.00
AUD + GST
$5,335.00
AUD Inc. GST
LM34CAZ Silicon Temperature Sensor
Product code: IC-LM34CAZ
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.
$25.00
AUD + GST
$27.50
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
$36.50
AUD + GST
$40.15
AUD Inc. GST
$11.00
AUD + GST
$12.10
AUD Inc. GST
Graphtec GL840 Case - IC-GL-840-CASE
Product code: IC-GL-840-CASE
Graphtec GL840 Carry Case, plastic with foam insert.
$200.00
AUD + GST
$220.00
AUD Inc. GST
Graphtec B-569 Rechargeable Lithium-ion battery pack - IC-B-569
Product code: IC-B-569
Graphtec Lithium-ion Battery.
$295.00
AUD + GST
$324.50
AUD Inc. GST
bun Multi - Multi-parameter Logger and Alarm System
Product code: IC-bun-Multi
The bun Multi monitors two out of three paramaters: temperature (in-fluid or out), pressure (liquid or gas) and AC current (non-invasive clamp). It is a cloud-based system and all settingcs can be set through a web-based application on any platform. It sends out email and text message alarms as soon as any measured parameter exceeds or falls below pre-set limits. Appropriate for monitoring HVAC systems, electromotors, engine rooms and any industrialfacility involving power or fluids.
YDOC ML417ADS RTU 4G SDI-12 & Analogue pulse inputs with 5W external solar panel. (Hosting and setup fees included for the first 12 months).
Product code: IC-ML417ADS-5W
The MLN417 is a flexible, powerful RTU which feature a 4G modem for transmission of data over the mobile data network either Telstra's 700 MHz 4G or Vodafone's 900 MHz 4G service. Includes 5W solar panel and Analogue pulse inputs.
$1,780.00
AUD + GST
$1,958.00
AUD Inc. GST
UE9-Pro USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet.
Product code: IC-UE9-Pro
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities. The UE9-Pro has all the features of the the normal UE9; with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC for applications with higher resolution requirements.
$1,728.00
AUD + GST
$1,900.80
AUD Inc. GST
UE9 USB or Ethernet Multifunction Data Acquisition Device. With Industrial-strength Ethernet
Product code: IC-UE9
The UE9 series was the first LabJack product to incorporate industrial strength Ethernet, and offers customers a wide range of capabilities.The UE9 is a USB or Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, up to 2 counters, and up to 6 timers.
EB37 Experiment Board
Product code: IC-EB37
Just like any breadboard, the EB37 is very useful for testing and validating electronic designs, but it also has a few different power supply rail voltages and breaks out LabJack I/O right next to your design.