Home > Leica DD130 Cable & Pipe Avoidance Locator Kit
Leica

Leica DD130 Cable & Pipe Avoidance Locator Kit

ORDER ME IN
Product code: DIGISYSTEM130

Backorder Now, once ordered your item will dispatch before the 02nd of June 2025, call 1300 737 871 (NZ 0800 737 871 to confirm).

The Leica DD130 cable locator features advanced automatic controls making the DD130 -to-use, requiring minimal user experience. Avoiding underground cables and pipes is a major concern on construction sites. Therefore, detecting the position of buried cables and pipes before excavation work can help prevent operator injury, asset damage and any subsequent costs.

Read more

$4,263.62 AUD + GST
 $4,689.99 AUD Inc. GST
The Leica DD130 cable locator features advanced automatic controls making the DD130 -to-use, requiring minimal user experience. Avoiding underground cables and pipes is a major concern on construction sites. Avoiding underground cables and pipes is a major concern on construction sites. Therefore, detecting the position of buried cables and pipes before excavation work can help prevent operator injury, asset damage and any subsequent costs. Use the DD130 cable locators in conjunction with a DA220 signal transmitter or range of accessories to achieve improved accuracy and application scope.

Kit includes:
- DD130 Underground Service Locator with digital display- DD220 1 Watt Signal Generator with Earth Spike, Crocodile clip connector & cables
- Transmitter 100mm (5" Signal Clamp) 2m
- Locator System Carry Bag
- 6x AA alkaline batteries and 1 7.2V lithium-ion battery (built-in)
- User manual
- 3 year warranty

Leica DD130
The Leica DD100 Series cable locators feature advanced automatic controls making the DD100 Series easy-to-use, requiring minimal user experience. Avoiding underground cables and pipes is a major concern on construction sites. Therefore, detecting the position of buried cables and pipes before excavation work can help prevent operator injury, asset damage and any subsequent costs.
Use the DD120 or DD130 cable locators in conjunction with a DA220 or DA230 signal transmitter or range of accessories to achieve improved accuracy and application scope.

Features:
- Automatic pinpointing
- Power, Radio, Auto modes
- Transmitter, 33kHz, 8kHz
- Depth detection up to 3 meters (10 feet)
- Good-to-Go Health Check and Start up test
- Extended trace range with additional 512Hz, 640Hz frequencies
- Signal current measurement
- Increased depth detection up to 10 metres (33 feet)
- IP54 rating - protection from dust and water

Specifications

DD130

Operating frequencies

Mode

Frequency

Power

50 Hz or 60 Hz mains electrical and harmonics

Radio

15 kHz to 60 kHz

Auto

Power, Radio, 33 kHz

Transmitter

32.768 (33) kHz
8.192 (8) kHz
512 Hz (DD130 series models)
640 Hz (DD130 series models)

Depth estimation

Depth range

Line 0.3 m to 3 m

 

Sonde 0.1 to 9.99 m

Depth accuracy
(Undistorted signal)

10%
General technical data

Mode

Output

Display panel

Monochrome

Keypad

2 membrane push buttons

Audio

85 dBA @ 30 cm
Power, Radio and Auto mode:
Continuous tone (different pitch for each mode).
8 kHz and 33 kHz mode: All tones are different.
Pulsed tone (different pitch for each mode).
512 Hz and 640 Hz mode:
Pulsed tone (different pitch for each mode).
All tones are different.

Battery type

6 x LR6 (AA) alkaline

Typical operating time

15 hours constant use at 20 °C/68 °F

Dimensions

85 x 250 x 760 mm/3.4 x 10 x 30 inches

Weight (incl. batteries)

2.7 kg with batteries

Temperature

Operating -20 °C to +50 °C, -4 °F to +122 °F
Storage -40 °C to +70 °C, -40 °F to +158 °F

Protection against water, dust and sand

Conforms to IP54

Humidity

95% RH non condensing
The effects of condensation are to be effectively counteracted by periodically drying out the product.

DA175 1 Watt Transmitter

Induction

Up to 1 Watt max.

Connection mode

Model dependent, up to 1 Watt or 3 Watt, when connected to a buried utility with an impedance of 300 Ohms

Operating transmission frequencies

131.072 (131) kHz
32.768 (33) kHz
8.192 (8) kHz
512 Hz (DA230 series models)
640 Hz DA230 series models)

Display panel

LED Indicators:
Battery low indicator
Connection mode
Frequency indicator
Power Output indicator

Keypad

4 membrane push buttons

Audio

85 dBA @ 30 cm
Induction mode:
Pulsed output with a differing rate for each frequency
Connection mode:
Low - No output: pulsed output, differing rate for each frequency
Good Connection output: constant tone, pitch dependent on power output

Battery type

7.4 V Li-Ion pack

Typical operating time 3 Watt, 1 Watt

15 hours at power level 2 connection mode

Dimensions

250 x 206 x 113 mm/9.84 x 8.11 x 4.45 inches

Weight (incl. standard accessories and batteries)

2.38 kg with Li-Ion

Temperature

Operating -20°C to +50°C, -4°F to +122°F
Storage -40°C to +70°C, -40°F to +158°F

Protection against water, dust and sand

Conforms to IP67 lid open or closed

Humidity

95% RH non condensing
The effects of condensation are to be effectively counteracted by periodically drying out the product.

Approvals

CE, FCC

Our Reviews



Recently Viewed

Instrument Choice will respond in 3 business hours

Get in touch with our expert scientists Instrument Choice.

In less than 3 business hours you will have an answer from our expert scientists.

Our Australian experts have access to a huge range of products from national and international suppliers.

If for any reason you have trouble using this form please email the following address and your enquiry will still receive a response from a scientist within 3 business hours: scientists@instrumentchoice.com.au