Product Code: IC-5200-10C
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-20S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5450-80S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
Product Code: IC-25-07C
The CDI 25 is a low-cost measurement of air usage by individual pieces of industrial equipment. It indicates leak-age and excessive usage locally with blinking lights, thereby eliminating the need for central monitoring and enabling equipment operators and maintenance mechanics to observe and respond to developing problems..
Product Code: IC-25-10C
The CDI 25 is a low-cost measurement of air usage by individual pieces of industrial equipment. It indicates leak-age and excessive usage locally with blinking lights, thereby eliminating the need for central monitoring and enabling equipment operators and maintenance mechanics to observe and respond to developing problems..
Product Code: IC-25-05S
The CDI 25 is a low-cost measurement of air usage by individual pieces of industrial equipment. It indicates leak-age and excessive usage locally with blinking lights, thereby eliminating the need for central monitoring and enabling equipment operators and maintenance mechanics to observe and respond to developing problems.
Product Code: IC-25-07S
The CDI 25 is a low-cost measurement of air usage by individual pieces of industrial equipment. It indicates leak-age and excessive usage locally with blinking lights, thereby eliminating the need for central monitoring and enabling equipment operators and maintenance mechanics to observe and respond to developing problems..
Product Code: IC-25-10S
The CDI 25 is a low-cost measurement of air usage by individual pieces of industrial equipment. It indicates leak-age and excessive usage locally with blinking lights, thereby eliminating the need for central monitoring and enabling equipment operators and maintenance mechanics to observe and respond to developing problems..
Product Code: IC-5200-25M
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-40M
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-07C
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-12C
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-15C
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-05S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-07S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-10S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-15S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5200-12S
The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-101M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-50M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-63M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-76M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-20C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-25C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-30C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-40C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-25S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-30S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-50S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-60S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5400-80S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
Product Code: IC-5450-20S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
Product Code: IC-5450-30S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
Product Code: IC-5450-40S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
Product Code: IC-5450-60S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
Product Code: IC-6200-12C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Product Code: IC-F-400NK
The F-400N K series of variable area flowmeters are specifically for highly corrosive substances. Flows from 0.025 to 5 GPM (0.1 to 20 LPM). Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion and wear resisitant and have different models and sizes to fit your needs, including models with Hastelloy guide rods.
Product Code: IC-F-400N
The F-400N standard series of variable area flowmeters. Flows from 0.025 to 5 GPM (0.1 to 20 LPM). Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion and wear resisitant and have different models and sizes to fit your needs.
Product Code: IC-F-410NK
The F-410N K series of variable area flowmeters are specifically for highly corrosive substances. Flows from 1 to 20 GPM (4 to 80 LPM). Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion and wear resisitant and have different models and sizes to fit your needs.
Product Code: IC-F-420NK
The F-410N K series of variable area flowmeters are specifically for highly corrosive substances. Flows from 5 to 50 GPM (20 to 200 LPM). Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion, wear resisitant, and anneled for additional strength and chemical resistance. Available in different models and sizes to fit your needs.
Product Code: IC-F-420N
The F-410N standard series of variable area flowmeters. Flows from 5 to 50 GPM (20 to 200 LPM). Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion, wear resisitant, and anneled for additional strength and chemical resistance. Available in different models and sizes to fit your needs.
Product Code: IC-F-430NK
The F-430N K series of variable area flowmeters are specifically for highly corrosive substances. Flows from 4 to 100 GPM (15 to 375 LPM), 1 1/2" and 2" female NPT fittings. Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion, wear resisitant, and anneled for additional strength and chemical resistance. Available in different models and sizes to fit your needs.
Product Code: IC-F-430N
The F-430N standard series of variable area flowmeters. Flows from 4 to 100 GPM (15 to 375 LPM), 1 1/2" and 2" female NPT fittings. Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. These adapators are corrosion, wear resisitant, and anneled for additional strength and chemical resistance. Available in different models and sizes to fit your needs.
Product Code: IC-F-440-K-AM
The F-444 K Series flow meters are specifically made for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options.
Product Code: IC-F-440-K-IL
The F-444 K Series flow meters are made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options.
Product Code: IC-F-440-K-PM
The F-444 K Series flow meters are made specifically for corrosive subtances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options
Product Code: IC-F-440-AM
The F-444 standard flow meters are made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options
Product Code: IC-F-440-IL
The F-444 standard flow meters are made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options.
Product Code: IC-F-440-PM
The F-444 standard flow meters are made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.025 to 5 GPM (0.1 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options.
Product Code: IC-F-460-FNPT-PVC
The F-460 flow meters are made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 5.0 GPM (.4 to 20.0 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. Select the chosen model under model options.