Building Material & Timber Moisture Meters

Per page:  
Display:  

Product code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
$450.00 AUD + GST
$495 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: IC-MEP
Building moisture inspection tool without causing any damage. - Non-destructive moisture measurements - Wood/timber, drywall/roofing & plaster/brick - Exclusive extra 1 year warranty!
$581.82 AUD + GST
$640 AUD Inc. GST
in stock icon
5 in stock info icon
each

Product code: IC-PCK5.1
A complete moisture and humidity testing kit for the Pest Control Professionals. Includes MRH III Moisture and Humidity Meter and Hygro-i Relative Humidity probe.
$1,404.55 AUD + GST
$1545.01 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-850002
Accurately reads elevated moisture content using cutting-edge electromagnetic wave technology that penetrates 0.25 inch through most materials.
$225.00 AUD + GST
$247.5 AUD Inc. GST
in stock icon
6 in stock info icon
each

Product code: IC-12010
The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building and insulating materials up to 25 mm in thickness.
$376.00 AUD + GST
$413.6 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!
$686.36 AUD + GST
$755 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: 0560-6060
Moisture meter displays in percent by weight using stored material characteristic curves. - For wood and building materials - Pin type mositure meter - Calibration protocol included
$153.00 AUD + GST
$168.3 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: MRH3
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. - Deep signal penetration to over 25mm - Exclusive 2 year extended warranty! - Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
$827.27 AUD + GST
$910 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
$850.00 AUD + GST
$935 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 2-4 business days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: T510
The T510 is a professional hand-held measuring device for the exact determination of wood and material moisture content according to the resistance measuring method. - Wood & material moisture with one device - Auto-calibration function
$400.00 AUD + GST
$440 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 3-4 weeks, call 1300 737 871 to confirm
each

Product code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
$900.00 AUD + GST
$990 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: 0560-6062
In addition to material moisture, testo 606-2 also measures air humidity and temperature. - Measures a wide variety of materials - Stored characteristic curves - Includes wrist strap and belt holder
$278.00 AUD + GST
$305.8 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: FMK
The ultimate kit for pre- & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Includes Tramex CMEX II digital concrete moisture meter, the Tramex MRHIII wood moisture meter, 3 reusable Hygro-i relative humidity, temperature and dew point probes, and an infrared surface thermometer.
$3,636.36 AUD + GST
$4000 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: 0560-6160
The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials
$455.00 AUD + GST
$500.5 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: PTM2
The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products.
$618.18 AUD + GST
$680 AUD Inc. GST
in stock icon
1 in stock info icon
each

Product code: SMM5
The Tramex Skipper 5 is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites.
$727.27 AUD + GST
$800 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in 3-4 weeks, call 1300 964 137 (NZ 0800 600 167 to confirm.
each

Product code: IC-CMK5.2
A complete kit for testing per international standards BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
in stock icon
Unfortunately, the CMK5.2 has been discontinued, check out our other Concrete Moisture Meters for more alternatives.
each

Product code: IC-FIK
A complete kit for moisture testing of concrete and wood flooring to ASTM and other international standards. Includes Tramex CMEX II digital concrete moisture meter, 3 reusable Hygro-i relative humidity probes, surface thermometer, a heavy-duty pin probe and travel case.
$2,000.00 AUD + GST
$2200 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store 2-4 days, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-1370
The HT 85 T is measures wood moisture, structural moisture and temperature. It is designed specifically with a larger measuring range for all three functions for precise measurements of sawn timber (up to 180 mm thick), particleboards, veneers and hardened building materials.
$1,074.00 AUD + GST
$1181.4 AUD Inc. GST

Product code: WDZK5.2
A compact kit for testing moisture in concrete per AS 1884 - 2012 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Water Damage Restoration EZ Kit comes in a Tramex Easy-travel case.
$1,318.18 AUD + GST
$1450 AUD Inc. GST
in stock icon
This item has been discontinued, please call 1300 964 137 to discuss an alternative.
each

Product code: IC-1510
The Hydromette HB 30 is an electronic moisture meter for wood and set building materials. It is designed for precise measurements of sawn timber (up to 180 mm thick), particle boards, parquet flooring and hardened building materials. The Hydromette HB 30 is also a versatile precision instrument because of its compatibility to a number of measurement probes that increases its measuring range for added utility.
$788.00 AUD + GST
$866.8 AUD Inc. GST

Product code: IC-2020
The Hydromette Compact A is an electronic moisture meter for soft and hard wood of various species up to 40 mm in thickness without using pins or additional probes.
$863.00 AUD + GST
$949.3 AUD Inc. GST
in stock icon
2 in stock info icon
each

Product code: IC-1250
The H 65 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-60% dry mass.
$796.00 AUD + GST
$875.6 AUD Inc. GST

Product code: IC-11250
The BL HT 70 unit is an electronic wood moisture and temperature meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness),chipboards, veneers, wood chips and similar bulk materials.
$763.00 AUD + GST
$839.3 AUD Inc. GST

Product code: IC-11300
The BL E is a triple measuring instrument for wood moisture, structural moisture and temperature. The device allows accurate measurements of wood, building and insulation materials according to the electrical resistance measuring method.
$553.00 AUD + GST
$608.3 AUD Inc. GST

Product code: IC-1100
The H 35 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-30% dry mass.
$486.00 AUD + GST
$534.6 AUD Inc. GST

Product code: IC-11100
The BL H 40 unit is an electronic wood moisture meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness), chipboards, and veneers.
$464.00 AUD + GST
$510.4 AUD Inc. GST

Product code: IC-1430
The Uni 1 is a versatile platform for a large number of hydromette probes that allows the Uni 1 to measure moisture, air humidity and temperature. The Uni 1 is appropriate for a variety of fields such as air conditioning and air flow monitoring, water damage revisers and quality assurance of hardened building materials.
$332.00 AUD + GST
$365.2 AUD Inc. GST

Product code: IC-12011
The BL Compact S is an electronic moisture meter for various wood fuels, suited for measuring various types of hardwood or softwood.
$320.00 AUD + GST
$352 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each

Product code: IC-2030
The Hydromette Compact B is equipped with a digital LCD and a universally applicable ball sensor for a non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, ceilings, floor finish, and other set building materials.
$309.00 AUD + GST
$339.9 AUD Inc. GST
in stock icon
Backorder Now, this item will normally leave store in over 2-3 weeks, call 1300 737 871 (NZ 0800 737 871) to confirm
each