Building Material & Timber Moisture Meters

Product Code: IC-MEP

Building moisture inspection tool without causing any damage.

- Non-destructive moisture measurements
- Wood/timber, drywall/roofing & plaster/brick
- Exclusive extra 1 year warranty!

Product Code: IC-PCK5.1

A complete moisture and humidity testing kit for the Pest Control Professionals. Includes MRH III Moisture and Humidity Meter and Hygro-i Relative Humidity probe.

Product Code: CME4

Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!

Product Code: 0560-6060

Moisture meter displays in percent by weight using stored material characteristic curves.

- For wood and building materials
- Pin type mositure meter
- Calibration protocol included

Product Code: MRHIII

The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials.

- Deep signal penetration to over 25mm
- Exclusive 2 year extended warranty!
- Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control

Product Code: T610

The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.

Product Code: T510

The T510 is a professional hand-held measuring device for the exact determination of wood and material moisture content according to the resistance measuring method.

- Wood & material moisture with one device
- Auto-calibration function

Product Code: IC-CMEX2

The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!

Product Code: 0560-6062

In addition to material moisture, testo 606-2 also measures air humidity and temperature.

- Measures a wide variety of materials
- Stored characteristic curves
- Includes wrist strap and belt holder

Product Code: IC-FMK5.1

The ultimate kit for pre- & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Includes Tramex CMEX II digital concrete moisture meter, the Tramex MRHIII wood moisture meter, 3 reusable Hygro-i relative humidity, temperature and dew point probes, and an infrared surface thermometer.

Product Code: 0560-6160

The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials

Product Code: IC-PTM2

The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products.

Product Code: SMP

The Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. A pocket sized meter, the Skipper is designed to locate moisture in boat hulls and fittings. With 2 Year Extended Warranty!

Product Code: CZK5.2

A compact kit for testing per international standards BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Concrete Inspection EZ Kit comes in a protective Tramex Easy-travel case. With 2 Year Extended Warranty!

Product Code: IC-CMK5.2

A complete kit for testing per international standards BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.

Product Code: IC-DSAL

The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems. Ideal for water leak detection in many building materials.

Product Code: IC-FZK5.1

A compact kit for instant and precise moisture testing of concrete and wood flooring. Includes the he Tramex CMEX II digital moisture meter, one Hygro-i Relative Humidity probe, Tramex heavy-duty wood pin-probe and travel case.

Product Code: IC-FIK5.2

A complete kit for moisture testing of concrete and wood flooring to ASTM and other international standards. Includes Tramex CMEX II digital concrete moisture meter, 3 reusable Hygro-i relative humidity probes, surface thermometer, a heavy-duty pin probe and travel case.

Product Code: IC-1370

The HT 85 T is measures wood moisture, structural moisture and temperature. It is designed specifically with a larger measuring range for all three functions for precise measurements of sawn timber (up to 180 mm thick), particleboards, veneers and hardened building materials.

Product Code: WDZK5.2

A compact kit for testing moisture in concrete per AS 1884 - 2012 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Water Damage Restoration EZ Kit comes in a Tramex Easy-travel case.

Product Code: IC-1510

The Hydromette HB 30 is an electronic moisture meter for wood and set building materials. It is designed for precise measurements of sawn timber (up to 180 mm thick), particle boards, parquet flooring and hardened building materials. The Hydromette HB 30 is also a versatile precision instrument because of its compatibility to a number of measurement probes that increases its measuring range for added utility.

Product Code: IC-2020

The Hydromette Compact A is an electronic moisture meter for soft and hard wood of various species up to 40 mm in thickness without using pins or additional probes.

Product Code: IC-1250

The H 65 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-60% dry mass.

Product Code: IC-11250

The BL HT 70 unit is an electronic wood moisture and temperature meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness),chipboards, veneers, wood chips and similar bulk materials.

Product Code: IC-11300

The BL E is a triple measuring instrument for wood moisture, structural moisture and temperature. The device allows accurate measurements of wood, building and insulation materials according to the electrical resistance measuring method.

Product Code: IC-12030

The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.

Product Code: IC-1100

The H 35 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-30% dry mass.

Product Code: IC-11100

The BL H 40 unit is an electronic wood moisture meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness), chipboards, and veneers.

Product Code: IC-12010

The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building and insulating materials up to 25 mm in thickness.

Product Code: IC-1430

The Uni 1 is a versatile platform for a large number of hydromette probes that allows the Uni 1 to measure moisture, air humidity and temperature. The Uni 1 is appropriate for a variety of fields such as air conditioning and air flow monitoring, water damage revisers and quality assurance of hardened building materials.

Product Code: IC-12011

The BL Compact S is an electronic moisture meter for various wood fuels, suited for measuring various types of hardwood or softwood.

Product Code: IC-2030

The Hydromette Compact B is equipped with a digital LCD and a universally applicable ball sensor for a non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, ceilings, floor finish, and other set building materials.

Product Code: IC-2010

The Hydromette Compact is an electronic moisture meter for wood and plaster such as timber, chipborad, gypsum, mixed plaster and fibreboard materials up to a maximum thickness of 25 mm.

Product Code: IC-1400

The M 4050 is an electronic wood moisture and temperature measure meter built with microprocessor technology for faster and more accurate measurements, with additional data analysis features. The M 2050 also has a large memory for storing measurement data that can easily be printed or trasferred to a computer. The M 4050 is also compatible with other hydromette measuring probes for more measurement options.

Product Code: IC-2011

The Hydromette Compact S is an electronic moisture meter for soft and hard wood up to 30 mm in thickness.

Product Code: IC-1700

The M 2050 is an electronic wood moisture and temperature measure meter built with microprocessor technology for faster and more accurate measurements, with additional data analysis features. The M 2050 also has a large memory for storing measurement data that can easily be printed or trasferred to a computer.

Product Code: IC-1670

The RTU 600 is an electronic four-in-one meter designed for measurements of wood moisture, structural moisture, air humidity and temperature. The meter is equipped with a universal wood species corrector, suitable for every wood species and automatic temperature compensation from -10 - +90 C. Moreover, it can also be connected with the active measuring electrodes that allowa the RTU 600 to measure surface temperature and humidity.

Product Code: IC-2070

The Compact LB is an electronic structural moisture indicator that uses non-destructive dielectric constant measuring or high frequency measuring method using a universally applicable ball sensor. The Compact LB is addionally equipped with an extendible telescope sensor (length 80 - 120 cm) which enables a quick an comfortable scanning of the components to be tested.

Product Code: IC-22000

The BL Combo kit includes the Hydromette BL Compact - IC-12010, Hydromette BL Compact B - IC-12030 and Hydromette BL Compact TF-IR - IC-12070.

Product Code: IC-humimeterBL2

Moisture meter for wood and wood chips. Appropriate for measuring moisture of round timber, split logs, wood chips, sawdust, pellets, shredded olive stones, hay and straw bales. Requires different probes to use, each sold separately.

Product Code: IC-humimeterBLL

Moisture meter with insertion probe of 1 meter length for determination of water content of wood chips with datalog.

Product Code: IC-humimeterBLW

Moisture meter for measuring wood samples with high water content and requires a large measuring depth such as split logs and round timber. Approrpriate for heating plants that use biomass or wood and suppliers of round timber and split logs.

Product Code: IC-humimeterBMC

Measuring instrument for a quick determination of water content of wood chips. For suppliers and operators of biomass heating plants.

Product Code: IC-humimeterGF2

Professional building moisture meter for building moisture, air humidity, indoor climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data. Sensors are not included. Sensor packages are available, sold separately.

Product Code: IC-humimeterMS4

The portable humimeter MS4 salt moisture meter for various kinds of salt with fine and coarse structure. The small and handy salt moisture meter is highly mobile and can be used to measure the moisture of salt anywhere - fast, easy and reliable.

Product Code: IC-humimeterSW1

Compact handheld moisture meter for monitoring indoor climate and estimating the risk of mould. Via the integrated calibration curve the risk of mould can be checked, allowing the evaluation if the ventilation of a room is useful.

Product Code: IC-humimeterWLW

Woosd moisture meter with higher measuring range (up to 150% wood moisture) for professional applications such as sawmills, carpentries and timber construction companies. Measuring probe not included. Requires IC-12630, sold separately.

Product Code: IC-QP2310

This is an intelligent wood moisture meter suitable for measuring water content in building materials and wooden fibre articles such as wooden and bamboo objects, cotton, paper etc.

Product Code: IC-850001

Accurately reads elevated moisture content in various materials for use in building inspection and other industries. Seven material group settings cover various woods, cement, concrete, mortar, plaster, and brick.

Product Code: IC-PTM2ZK5.1

A kit for instant and precise measurement of moisture content in a large range of wood species and wood-based products using pin-type electrodes. Featuring the Tramex PTM Professional moisture meter with its built-in pins and a handheld heavy-duty pin probe, the Professional Wood Kit comes in a Tramex protective heavy-duty carrying case with die-cut foam lining.