Product Code: IC-MEP
Building moisture inspection tool without causing any damage.
- Non-destructive moisture measurements
- Wood/timber, drywall/roofing & plaster/brick
- Exclusive extra 1 year warranty!
Product Code: MO295
Pinless Moisture Psychrometer + IR Thermometer, 8-in-1 Meter with Memory and Built-in InfraRed Thermometer
Product Code: IC-850002
Accurately reads elevated moisture content using cutting-edge electromagnetic wave technology that penetrates 0.25 inch through most materials.
Product Code: IC-T660
Professional hand-held measuring device for the quick, non-destructive determination of moisture distributions in near-surface areas
Product Code: MRHIII
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials.
- Deep signal penetration to over 25mm
- Exclusive 2 year extended warranty!
- Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
Product Code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
Product Code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
Product Code: 0560-6160
The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials
Product Code: SMP
The Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. A pocket sized meter, the Skipper is designed to locate moisture in boat hulls and fittings. With 2 Year Extended Warranty!
Product Code: IC-DSAL
The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems. Ideal for water leak detection in many building materials.
Product Code: IC-2020
The Hydromette Compact A is an electronic moisture meter for soft and hard wood of various species up to 40 mm in thickness without using pins or additional probes.
Product Code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
Product Code: IC-2030
The Hydromette Compact B is equipped with a digital LCD and a universally applicable ball sensor for a non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, ceilings, floor finish, and other set building materials.
Product Code: IC-2070
The Compact LB is an electronic structural moisture indicator that uses non-destructive dielectric constant measuring or high frequency measuring method using a universally applicable ball sensor. The Compact LB is addionally equipped with an extendible telescope sensor (length 80 - 120 cm) which enables a quick an comfortable scanning of the components to be tested.
Product Code: MO290
Pinless Moisture Psychrometer + IR, 8-in-1 Meter with Patented Built-in IR Thermometer
Product Code: IC-MR176
The FLIR MR176 Imaging Moisture Meter Plus with IGM technology is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture.
Product Code: IC-MR160
The FLIR MR160 features IGM technology powere by FLIR Lepton thermal imaging sensor to quickly and accurately identify different temperature patterns to identify problem areas.
Product Code: IC-CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds.
Product Code: IC-MR60
The FLIR MR60 Moisture Meter Pro is an easy-to-use pin and pinless moisture meter with advanced functionality.
Product Code: IC-humimeterBL2
Moisture meter for wood and wood chips. Appropriate for measuring moisture of round timber, split logs, wood chips, sawdust, pellets, shredded olive stones, hay and straw bales. Requires different probes to use, each sold separately.
Product Code: IC-humimeterBLW
Moisture meter for measuring wood samples with high water content and requires a large measuring depth such as split logs and round timber. Approrpriate for heating plants that use biomass or wood and suppliers of round timber and split logs.
Product Code: IC-humimeterLM6
The humimeter LM6 leather moisture meter is a handheld moisture meter for measuring the moisture of leather in a nondestructive manner. It is well suited for all kinds of leather and various degrees of moisture - from wet to dry leather.
Product Code: IC-humimeterMS4
The portable humimeter MS4 salt moisture meter for various kinds of salt with fine and coarse structure. The small and handy salt moisture meter is highly mobile and can be used to measure the moisture of salt anywhere - fast, easy and reliable.
Product Code: IC-humimeterPM5
For paper manufacturers, paper processors and paper retailers, for a non-destructive determination of absolute moisture of paper and cardboard at warm, running paper rolls as well as at stagnant, cool rolls. With non-contact infrared paper temperature measurement.
Product Code: IC-humimeterRH6
Paper moisture meter for piles of paper. Also ideal for automatically monitoring the climate of printing rooms and paper stockrooms. Also features absolute humidity measurement and calibration curves.
Product Code: IC-humimeterWLW
Woosd moisture meter with higher measuring range (up to 150% wood moisture) for professional applications such as sawmills, carpentries and timber construction companies. Measuring probe not included. Requires IC-12630, sold separately.
Product Code: IC-ME5
The Tramex Moisture Encounter is a Dual-Depth, non-destructive moisture meter for instant moisture measurement and evaluation. Deep Depth penetration up to 1.25 inches (30mm) and Shallow Depth penetration up to 0.40 inches (10mm).
Product Code: IC-PMSA
The PMSA is a laboratory instrument for the determination of absolute water content of single paper sheets.
Product Code: IC-PTM2ZK5.1
A kit for instant and precise measurement of moisture content in a large range of wood species and wood-based products using pin-type electrodes. Featuring the Tramex PTM Professional moisture meter with its built-in pins and a handheld heavy-duty pin probe, the Professional Wood Kit comes in a Tramex protective heavy-duty carrying case with die-cut foam lining.
Product Code: IC-PTMMK5.1
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials.
Product Code: IC-BLD5765
The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with a RF measurement system unique to Protimeter. This system allows you to detect moisture up to ¾” (20mm) below and behind the surface in the most efficient way possible
Product Code: IC-BLD5702
The BLD5702 Digital Mini is a non-destructive, moisture meter to help assess the moisture levels of building materials for constuction, restoration or repair. It has a pin-type measurement function, displays measurements on a large LED screen and has an auxilary port for additional moisture probes.
Product Code: IC-BLD7714-AQ
This is a dual-meter kit including the Hygromaster 2 hygrometer and the Aquant non-destructive moisture meter. Includes thermoformed case.
Product Code: IC-BLD7714-SM
This is a dual-meter kit including the SurveyMaster dual-function moisture meter and the Hygromaster 2 hygrometer. Includes deep wall probes, heavy duty moisture probe and thermoformed case.
Product Code: IC-BLD2000
The Protimeter Mini can be used for making rapid moisture assessments in a wide range of building materials including wood, masonry, drywall, plaster and concrete. The instrument measuring pins are small and sharp which means measurements can be taken at the surface with virtually no mark left behind.
Product Code: IC-BLD2001
The Protimeter Mini C is a low cost, highly durable moisture meter designed specifically for the wood floor installation industry. The Protimeter Mini C is a pin type moisture meter that displays instant moisture content results on its 6 to 30% LED scale.
Product Code: IC-BLD5905
This kit is based around the Protimeter SurveyMaster dual-function moisture meter. It includes th Protimeter Hygromaster 2 to measure air humidity and surface temperature and other additional accessories such as a HD Hammer probe and EIFS probe for insulation systems.
Product Code: 0560-6160-Kit
The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials. With waterproof hard carry case!