Product Code: IC-MEP
Building moisture inspection tool without causing any damage.
- Non-destructive moisture measurements
- Wood/timber, drywall/roofing & plaster/brick
- Exclusive extra 1 year warranty!
Product Code: ICZD06
The pH and Moisture Meter allows users to quickly and easily determine the levels of pH and moisture in their soil.
- pH range of 3.0 to 8.0
- 30cm long probe
Product Code: IC-T660
Professional hand-held measuring device for the quick, non-destructive determination of moisture distributions in near-surface areas
Product Code: CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. With 2 Year Extended Warranty!
Product Code: 0560-6060
Moisture meter displays in percent by weight using stored material characteristic curves.
- For wood and building materials
- Pin type mositure meter
- Calibration protocol included
Product Code: MRHIII
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials.
- Deep signal penetration to over 25mm
- Exclusive 2 year extended warranty!
- Suitable for water damage, restoration, flooring, indoor air quality, home inspection and pest control
Product Code: T610
The T610 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface moisture content.
Product Code: T510
The T500 is aProfessional hand-held measuring device for the exact determination of wood and material moisture content according to the resistance measuring method.
- Wood & material moisture with one device
- Auto-calibration function
Product Code: PMS-714
The Soil Moisture Meter has been designed for an easy and accurate one step approach.
- Heavy-duty 20cm probe.
- IP65 water resistance
- With 2 year extended warranty!
Product Code: IC-CMEX2
The CMEXPert is a Digital Non-Destructive meter for measuring moisture content instantly in concrete floors and floor screeds. Incorporating an optional plug-in port for a Pin-Type wood probe and an RH probe, this is the ideal all-in-one instrument for this task. With 2 Year Extended Warranty!
Product Code: IC-T-350
Aquaterr Soil Moisture Meter - Moisture and Temperature in C
Product Code: 0560-6062
In addition to material moisture, testo 606-2 also measures air humidity and temperature.
- Measures a wide variety of materials
- Stored characteristic curves
- Includes wrist strap and belt holder
Product Code: IC-FMK5.1
The ultimate kit for pre- & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Includes Tramex CMEX II digital concrete moisture meter, the Tramex MRHIII wood moisture meter, 3 reusable Hygro-i relative humidity, temperature and dew point probes, and an infrared surface thermometer.
Product Code: IC-MB90
Ideal for routine moisture analysis applications, the MB90's halogen heating begins to dry samples in seconds and performs up to 40% faster than traditional infrared methods.
Product Code: IC-PCK5.1
A complete moisture and humidity testing kit for the Pest Control Professionals. Includes MRH III Moisture and Humidity Meter and Hygro-i Relative Humidity probe.
Product Code: MPKit-ICT
Sets the standard in soil moisture testing and is an ideal all round soil moisture water content device.
- Stainless steel sensors
- Has memory, download cable & software
- Not affected by temperature
Product Code: AGFH0010
Hay and Straw moisture tester (50cm) for moisture level & temp. of baled hay and straw, and indicative moisture levels in silage.
- Robust construction, high-quality materials
- Display updates during measurements
Product Code: IC-FA08125-PLUS
The AGRETO GFM-PLUS is a portable device for fast determination of the moisture content of grain, corn, oil crops, protein crops and other crops (42 crops in total), ideal for the determination of the harvest and storage life.
Product Code: 0560-6160
The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials
Product Code: IC-AGFP0010
The AGRETO installation moisture meter PFM II is a professional measuring instrument for determining the moisture content of hay and straw bales during the baling process.
Product Code: IC-MB120
Designed for professional moisture analysis with advanced features including a Temperature Guide which analyzes a sample to determine optimum drying temperature and a Methods Library that can store up to 100 methods for faster testing.
Product Code: IC-MB25
The IC-MB25 Moisture Analyser has Flexible Performance, Simple to Operate and Compact, Easy-to-Clean Design.
Product Code: IC-MB23
The IC-MB23 Moisture Analyser has Flexible Performance, Simple to Operate and Compact, Easy-to-Clean Design.
Product Code: IC-M-350
Aquaterr Soil Moisture Meter - Moisture Only
Product Code: IC-PTM2
The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products.
Product Code: IC-MST-01
The Model MST-01 Digital Moisture Meter is a high accuracy instrument used for determining the moisture content in wood, bamboo, and other various materials
Product Code: MRH3KHiI
The complete package for Moisture and Humidity measurement of the Building Envelope, incorporating 3 modes of operation : Non invasive moisture content testing of wood, Plug in heavy duty wood pin probe with extra insulated 7 in (200mm) pins for deep wall probing, Plug in Hygro-i Humidity Probe for Relative Humidity, Temperature, Dew Point and Mixing Ratio readings. With 2 Year Extended Warranty!
Product Code: SMP
The Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. A pocket sized meter, the Skipper is designed to locate moisture in boat hulls and fittings. With 2 Year Extended Warranty!
Product Code: CZK5.2
A compact kit for testing per international standards BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Concrete Inspection EZ Kit comes in a protective Tramex Easy-travel case. With 2 Year Extended Warranty!
Product Code: IC-CMK5.2
A complete kit for testing per international standards BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
Product Code: IC-DSAL
The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems. Ideal for water leak detection in many building materials.
Product Code: IC-FZK5.1
A compact kit for instant and precise moisture testing of concrete and wood flooring. Includes the he Tramex CMEX II digital moisture meter, one Hygro-i Relative Humidity probe, Tramex heavy-duty wood pin-probe and travel case.
Product Code: IC-FIK5.2
A complete kit for moisture testing of concrete and wood flooring to ASTM and other international standards. Includes Tramex CMEX II digital concrete moisture meter, 3 reusable Hygro-i relative humidity probes, surface thermometer, a heavy-duty pin probe and travel case.
Product Code: IC-06036900
400W straight halogen lamp heating system with SRA filter and SHS weighing technology
Product Code: IC-1370
The HT 85 T is measures wood moisture, structural moisture and temperature. It is designed specifically with a larger measuring range for all three functions for precise measurements of sawn timber (up to 180 mm thick), particleboards, veneers and hardened building materials.
Product Code: WDZK5.2
A compact kit for testing moisture in concrete per AS 1884 - 2012 & ASTM F2659 & ASTM F2170 featuring the Tramex CMEX II moisture meter and Tramex Hygro-i relative humidity probes. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Water Damage Restoration EZ Kit comes in a Tramex Easy-travel case.
Product Code: IC-1510
The Hydromette HB 30 is an electronic moisture meter for wood and set building materials. It is designed for precise measurements of sawn timber (up to 180 mm thick), particle boards, parquet flooring and hardened building materials. The Hydromette HB 30 is also a versatile precision instrument because of its compatibility to a number of measurement probes that increases its measuring range for added utility.
Product Code: IC-2020
The Hydromette Compact A is an electronic moisture meter for soft and hard wood of various species up to 40 mm in thickness without using pins or additional probes.
Product Code: IC-1250
The H 65 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-60% dry mass.
Product Code: IC-11250
The BL HT 70 unit is an electronic wood moisture and temperature meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness),chipboards, veneers, wood chips and similar bulk materials.
Product Code: IC-11300
The BL E is a triple measuring instrument for wood moisture, structural moisture and temperature. The device allows accurate measurements of wood, building and insulation materials according to the electrical resistance measuring method.
Product Code: IC-12030
The BL Compact B unit is an electronic structural moisture meter for non-destructive building material moisture measurement. The Hydromette unit uses the dielectric constant/radio frequency principle of measurement.
Product Code: IC-1100
The H 35 is an electronic wood moisture instrument effective in measuring the moisture of various wood building materials and products such as sawn timber (up to 180 mm in thickness), chip boards and veneers at 4-30% dry mass.
Product Code: IC-11100
The BL H 40 unit is an electronic wood moisture meter that uses the resistance principle of measurement for precisely measuring sawn timber (up to 180 mm in thickness), chipboards, and veneers.
Product Code: IC-12010
The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building and insulating materials up to 25 mm in thickness.
Product Code: IC-1430
The Uni 1 is a versatile platform for a large number of hydromette probes that allows the Uni 1 to measure moisture, air humidity and temperature. The Uni 1 is appropriate for a variety of fields such as air conditioning and air flow monitoring, water damage revisers and quality assurance of hardened building materials.
Product Code: IC-12011
The BL Compact S is an electronic moisture meter for various wood fuels, suited for measuring various types of hardwood or softwood.
Product Code: IC-2030
The Hydromette Compact B is equipped with a digital LCD and a universally applicable ball sensor for a non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, ceilings, floor finish, and other set building materials.
Product Code: IC-2010
The Hydromette Compact is an electronic moisture meter for wood and plaster such as timber, chipborad, gypsum, mixed plaster and fibreboard materials up to a maximum thickness of 25 mm.
Product Code: IC-1400
The M 4050 is an electronic wood moisture and temperature measure meter built with microprocessor technology for faster and more accurate measurements, with additional data analysis features. The M 2050 also has a large memory for storing measurement data that can easily be printed or trasferred to a computer. The M 4050 is also compatible with other hydromette measuring probes for more measurement options.