Product Code: IC-T7-Pro
The T7-Pro has all the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC.
All the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC.
CB15 Terminal Board
Product Code: IC-CB15
Provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
$120.00 AUD + GST
$132.00 AUD Inc. GST
CB37 Terminal Board
Product Code: IC-CB37
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
$150.00 AUD + GST
$165.00 AUD Inc. GST
1 in stock
EB37 Experiment Board
Product Code: IC-EB37
Just like any breadboard, the EB37 is very useful for testing and validating electronic designs, but it also has a few different power supply rail voltages and breaks out LabJack I/O right next to your design.
$329.00 AUD + GST
$361.90 AUD Inc. GST
RB12 Relay Board
Product Code: IC-RB12
Provides 12 industry standard relay module sockets to a U3, U6, UE9, T4, or T7. Commonly used to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules.
$310.00 AUD + GST
$341.00 AUD Inc. GST
Mux80 AIN Expansion Board
Product Code: IC-Mux80
Analog input expansion board that adds 80 analog input channels. It can be connected to a U6, UE9, or T7 directly through the DB37 connector.
$354.00 AUD + GST
$389.40 AUD Inc. GST
PS12DC Power Switching Board
Product Code: IC-PS12DC
Controlled through 12 digital outputs, the PS12DC can switch power sources ranging from 5 to 28V DC. Attach the PS12DC to the DB15 connector presented on all compatible devices, and toggle the states of the EIO and CIO digital output lines to turn the switches on/off.
$237.00 AUD + GST
$260.70 AUD Inc. GST
Product Code: IC-LJTick-CurrentShunt
The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.
$146.00 AUD + GST
$160.60 AUD Inc. GST
Product Code: IC-LJTick-DAC
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T7, T4) and any UD family device (U3/U6/UE9).
$195.00 AUD + GST
$214.50 AUD Inc. GST
Product Code: IC-LJTick-DigitalOut5V
Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a 5V logic device.
$105.00 AUD + GST
$115.50 AUD Inc. GST
Product Code: IC-LJTick-Divider
The LJTick-Divider (LJTD) is a signal conditioning module designed to take two single-ended higher voltage analog signals, and divide them by a specified value.
$115.00 AUD + GST
$126.50 AUD Inc. GST
Product Code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$177.00 AUD + GST
$194.70 AUD Inc. GST
Product Code: IC-LJTick-InBuff
Very low bias current (1pA) input buffer which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7, T4) have typical bias currents on the order of 20 nA, which is quite low, but the LJTick-InBuff reduces that dramatically.
$141.00 AUD + GST
$155.10 AUD Inc. GST
Product Code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$98.00 AUD + GST
$107.80 AUD Inc. GST
Product Code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$108.00 AUD + GST
$118.80 AUD Inc. GST
Product Code: IC-LJTick-Proto
The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Includes 3 loose pieces: the PCB, a 4-position screw terminal, and a right-angle pin header.
$84.00 AUD + GST
$92.40 AUD Inc. GST
Product Code: IC-LJTick-RelayDriver
Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs into the standard DIO/DIO/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Each DIO controls a switch to ground (i.e. open-collector) that can hold off up to 50 volts and can sink up to 200 mA.
$91.00 AUD + GST
$100.10 AUD Inc. GST
Product Code: IC-LJTick-Resistance
The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This tick gives users a regulated 2.5V signal that can be used as a excitation voltage and a known resistance value in series with a sensor input line. This gives users the ability to calculate the resistance of their connected sensor.
$123.00 AUD + GST
$135.30 AUD Inc. GST
Product Code: IC-LJTick-VRef
The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V or 4.096V signal. These ticks are commonly used as an excitation voltage for various circuits. The IOA and IOB lines are pass-through terminals, and do not interact with the accessory in any way. Available in two models.
$110.00 AUD + GST
$121.00 AUD Inc. GST
LabJack DB37 Cable (3 ft)
Product Code: IC-DB37
A three foot DB37 cable, useful for connections between the Mux80 and CB37 Terminal Board(s). Also can be used to connect a U6, UE9, or T7 to a CB37 or Mux80.
$99.00 AUD + GST
$108.90 AUD Inc. GST
1 in stock
LM34CAZ Silicon Temperature Sensor
Product Code: IC-LM34CAZ
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.
$87.00 AUD + GST
$95.70 AUD Inc. GST
EI1034 Temperature Probe
Product Code: IC-EI1034
Easy to use and very accurate temperature probe from Electronic Innovations Corp. Features a waterproof stainless-steel probe, a high-level linear output of 10 mV per degree F, a typical accuracy of +/- 0.4 degrees F (+/- 0.22 degrees C) at room temperature, and a range of 0 to +230 degrees F (-17 to +110 degrees C, with U3/UE9).
$182.00 AUD + GST
$200.20 AUD Inc. GST
EI1050 Digital Temperature/Humidity Probe
Product Code: IC-EI1050
Uses two digital lines on any LabJack to retrieve temperature and relative humidity measurements. Featuring the Sensirion SHT11 sensor, it provides 14-bit temperature readings and 12-bit humidity readings. An enable line is provided to allow multiple EI-1050 probes to be connected to a single LabJack.
$228.00 AUD + GST
$250.80 AUD Inc. GST
Instrument Choice is the dominant, fastest growing, independent supplier of scientific instruments in Australasia. We are passionate for you to enjoy an outstanding experience while we support you to conduct experiments and select the right scientific instruments for meaningful, accurate measurements.
Many of our customers write to us to express their appreciation.
“I had some questions about the humidity alarm I purchased. The support team were very helpful. I highly recommend Instrument Choice” - Mark
“The fact that I can contact Instrument Choice and speak to an experienced technician is extremely helpful.” – Matty
“Amazing assistance over the phone, exceptional communication during the whole ordering process, super-fast freight!!” – Jillian
“The item I bought was fantastic, the order came in very reasonable time, I loved the lollies :), and have been very impressed with the after sales service. I have my own business, and so appreciate the effort of customer service. You guys are fantastic.” - Leanne
How We Support You - “Our huge range of high-quality products, backed by experienced scientists, risk-free purchasing terms and overnight shipping makes Instrument Choice the risk-free way to secure the right product for your application and have it delivered direct to your door.” - Tyson Grubb (Founder & CEO)
Expert, Responsive, Friendly, Continuous (9 am - 5:30 pm weekdays)
Here’s a little secret - each member of our customer service team is a qualified, experienced scientist. What’s more, they appreciate your need for supportive
communication. You can expect:
✔ Quotes within a business hour
✔ 3 business hour responses to email inquiries
✔ Unlimited phone/email support - even after your warranty has expired!
Need a hand? Contact us
Free, Experienced, Independent (9 am - 5:30 pm weekdays)
Our customers can often become frustrated by a lack of familiarity with a special application or struggle to understand an unfamiliar device. We love to help and enjoy advising about things like, how to:
✔ Set up and use your equipment
✔ Set-up trials and experiments
✔ Calibrate scientific equipment
✔ Save on the total cost of owning and operating scientific equipment - over and above the listed price for item …. And many more
We love a challenge – so please test us!
For many of us time is money. Finding and purchasing the right scientific instrument shouldn’t be a hassle. So, we made it easy for you to shop with us.
✔ Online Store: We have a comprehensive product range, our website is easy to navigate, and the shopping cart is a smooth experience. If you know what model you want, you can find it fast using our search functions. On the other hand, you can navigate through our menus or contact a scientist.
✔ Unsure of what you need? You’re not alone! Our experts are highly-trained and ready to guide you to the best value-for-money product for your application. If your needs are complex, don’t worry. We’ll do our research and then recommend your best solution – even if it’s not supplied by Instrument Choice!
✔ Huge Range of Products: We are a one-stop-shop with solutions for a wide range of applications.
✔ Not in Our Range? We will track it down for you, no worries.
✔ Order Your Way: Ordering options to suit you - online, phone, fax, email, mail. Pay by Visa, Mastercard, Amex, EFT, Cheque, Account (application required).
✔ Free 30 Day Accounts Available: Australian or New Zealand councils, universities, schools, hospitals or government departments will be automatically set-up with a free account. Also, Instrument Choice’s quotes and delivery procedures conform to government best practice procedures.
Why pay for shipping when Instrument Choice has negotiated such amazing freight rates for Australia and New Zealand? Overnight shipping is available to capital cities for 93% of stocked items, the rest still travel by express road to get to you quickly.
We insist you pay zero, zilch… absolutely nothing for shipping on orders over $100 (inc. GST)!
Get details about our super-fast and secure shipping options here
Imagine you buy your equipment, it arrives and - oh no – it’s wrong for your application. What a bummer! Relax, Instrument Choice will make sure you’ll never be stuck with any unwanted scientific instrument.
Here’s how we guarantee you risk-free purchasing:
✔ 30-day free returns & money-back guarantee – Instrument Choice’s free returns policy means that for any warranty claim, Instrument Choice will absorb the freight costs to return your purchased item. We offer our customers this irrespective of whether you are entitled to your money-back or a replacement product!
✔ Additional 1 Year Product Warranty - Compare the difference! Nearly all scientific instrument suppliers charge an additional 15-40% for an extended warranty. We automatically provide an extended extra 1 year warranty free of charge!
Let’s be clear. We stand by our equipment and our customers. Instrument Choice’s warranty exceeds that of any other supplier, as well as the warranty of the manufacturer. We will add an extra 1-year warranty on everything apart from consumables. *
* Consumables include any item(s) used in conjunction with the operation of a product that degrades over time and needs regular replacement. To assist you with your purchase, Instrument Choice lists any consumables required for the operation of a product on its relevant product page. Examples of consumables include but are not limited to:
✔ Satisfaction Guarantee - If for any reason you are unhappy with your purchase and you can’t find a satisfactory outcome under our Returns or Extended Warranty policies, please contact us and tell us share your concerns. Our commitment is to ensure you will always be satisfied with our service.
Contact our expert scientists now to get the right meter or data logger to suit your needs and discuss your project.