Data Logger Accessories and Software

Product Code: BASE-U-1

Optic USB Base Station for Pendant

Product Code: IC-MAGMOUNT

The Magnetic Mount is available for Vibration Data Loggers VS RT64 and VS RT128

Product Code: IC-TRIADAPT

This Standard Tripod Adapter is a bracket available for the Noise Sentry RT and the Noise Sentry RT-Wireless.

Product Code: IC-CONUSB

The USB Charge Conditioner connects in-line between the output of the USB power source and the USB cable going to the instrument. It should be connected as close to the instrument as possible.

Product Code: IC-SP002

This SP 002 USB Solar Panel allows indefinite operation of the Noise Sentry RT and Noise Sentry RT-W instruments, even in prolonged overcast conditions. Its output voltage is always safe for these instruments.

Product Code: IC-U-DT-1

Conveniently offload data in the field with the HOBO U-Shuttle Data Transporter. This product also allows users to easily relaunch HOBO U-series data loggers and HOBO Weather Stations, Micro Stations, and HOBO Energy Logger systems. View readings on a 2 x 16-character display for selected data loggers, and access logger status for all loggers. An Optic USB Base Station is required for use with optic USB data loggers.

Product Code: IC-WINDSCREEN

Windscreen for Noise Sentry RT Personal, Noise Sentry RT-W and Noise Sentry RT

Product Code: IC-CABLE-ADAP10

The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

Product Code: IC-CABLE-ADAP24

The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

Product Code: IC-CABLE-ADAP5

The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

Product Code: IC-CABLE-1-300

A 300-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.

Product Code: IC-CABLE-1-50

A 50-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.

Product Code: IC-S-ADAPT-5

A 5-inch extension cable with a 2-for-1 splitter TEE junction for doubling Smart Sensor RJ12 port connections. This product is to be used with the H22-001.

Product Code: IC-AC-SENS-2

The AC-SENS-2 is an AC power adapter that provides DC power to sensors that require it. This expands the range of 3rd party sensors that can be used with Onset's HOBO U12, HOBO U30, and HOBO ZW series products.

Product Code: IC-AC-SENS-1

The AC-SENS-1 is an AC power adapter that provides DC power to sensors that require it. This expands the range of 3rd-party sensors that can be used with Onset's HOBO RX3000,U12, U30-NRC, and ZW series products.

Product Code: IC-AC-U30-EU

240VAC Power supply option for the RX3000 and U30 Remoter Monitoring Systems

Product Code: IC-ACT-0750-XXX

The Accu-CT revenue grade, split-core current transformer offers outstanding linearity and phase angle accuracy with a unique one-handed opening and closing mechanism.

Product Code: IC-U26-GUARD-2

The Anti-fouling Protective Guard can be used in place of the standard protective guard for protection against fouling during deployment. The anti-fouling guard uses copper windings to reduce bio-fouling, while still allowing good water flow to the sensor.

Product Code: IC-T-ASH-G2-500

The 500-psig Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids with an accuracy of 1% FS from -20 to 85 C (-4 to 185 C) and only 1.5% FS -40 to -20 C and 85 to 125 C (-40 to 4 F and 185 to 257 F).

Product Code: IC-CABLE-2070

C02 and Temp output cable to FlexSmart Analog Module for indoor use.

Product Code: IC-M-CDY

This accessory provides a convenient place to organize and mount excess sensor cable.

Product Code: IC-U23-RS-CLAMPKIT

This clamp allows the U23-001 or U23-004 to be mounted in the RS1 and M-RSA radiation shields. It is NOT required for use with other HOBO Pro v2 models.

Product Code: IC-T-CDI-5400-20S

Effectively monitor compressed air systems with the T-CDI-5400-20S. This flow meter includes two probes, one warmer than the other. This arrangement calculates mass velocity based on heat requirements. Additionally, pipe area data is used to determine flow amounts. This product fits a two-inch steel pipe.

Product Code: IC-T-CON-ACT-300

0-300 volt self-powered transformer for monitoring sine wave, single-phase AC voltage. Requires Input Cable for use with U12 loggers.

Product Code: IC-CABLE-1-CRIMP

An envelope of twelve 3/8-inch long stainless steel crimp sleeves for use with 1/16" teflon-coated stainless steel cable.

Product Code: IC-CTS

The CTS series CTs are available with windows from 0.75 inch up to 2.0 inch. They have a removable section, so that they can be installed without interrupting the circuit.

Product Code: IC-T-VER-PXU-L

The T-VER-PXU-L is a differential air pressure transducer with LCD that utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliability.

Product Code: IC-T-VER-PXU-X

The T-VER-PXU-X is a differential air pressure transducer that utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliabilit

Product Code: IC-A-E50B2-LEADSET

Wiring kit contains the appropriate wires to connect the HOBO UX120-017 Pulse data logger to the E50B2 Power and Energy Meter and electrical panel.

Product Code: IC-CABLE-RX-PWR

The external DC power cable is used to connect a user-supplied power source to the HOBO RX3000 Monitoring Station to charge the station's internal battery. The external power source can be an intermittent power source, such as a 6W or larger solar panel. The external power source must be able to supply 6W, but the average power used will be much less and depends on the number and type of sensors, logging interval, and the frequency of internet connections.

Product Code: IC-M-GKA

Grounding Kit.

Product Code: IC-M-CAB

For use with Onset tripods or masts, the half cross arm assures unobstructed wind measurement. Half cross arm (49cm/19.2in) provides mounting for one wind sensor.

Product Code: IC-HP-B

Replacement battery for HOBO U23 Data loggers

Product Code: IC-CABLE-PC-3.5

Interface Cable for PC computers.

Product Code: IC-BOOT-BLK

The optional HOBO Water Temperature Pro thermoplastic elastomer boot provides cushioning for use in harsh conditions; offered in black to minimize underwater visibility.

Product Code: IC-BOOT-WHT

The optional HOBO Water Temperature Pro thermoplastic elastomer boot provides cushioning for use in harsh conditions; offered in white to minimize solar radiation absorption.

Product Code: IC-M-GWA

HWS Guy Wire Kit.

Product Code: IC-M-LBB

The light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.

Product Code: IC-M-LLA

Simply drop the light sensor level over the PAR or solar radiation sensor to determine if the sensor is level. Purchase one for use on any number of light sensors.

Product Code: IC-UA-PARTSKIT

Pendant replacement parts kit includes pendant case, end cap, O-ring, two screws, and silicone-based O-ring grease.

Product Code: IC-CASE-4X

With the Protective Case, the LCD data logger can be mounted wherever you need a real-time data display, data logging, and alarm initiation - even in wet, dusty, or condensing environments. Onsite data download to a laptop is easy through a removable seal on the side of the case.

Product Code: IC-U26-RDOB-1

The Replacement DO Sensor Cap replaces the original DO sensor cap that's included with the HOBO DO Data Logger. The DO sensor caps have a 6-month deployment life. (The caps expire 7 months after initialization to allow some time before and after the deployment.)

Product Code: IC-U12-015-ORING-E

Replacement O-ring kit (EPDM)

Product Code: IC-U12-015-ORING-V

Replacement O-ring kit (Viton)

Product Code: IC-CABLE-CO2

CO2 Sensor to Logger Cable (20.3cm - 8 inches) for use with U12 data loggers.

Product Code: IC-S-ADAPT-6

Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to an RX3000, U30, H22, or H21 logger.

Product Code: IC-S-EXT-M00X

A 2, 5, 10 and 25 meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor for indoor and ourdoor environments.

Product Code: IC-T-VER-971BP-200

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.

Product Code: IC-BOOT-TIDBIT-BK

The optional TidbiT thermoplastic elastomer boot provides cushioning for use in harsh conditions offered in black to minimize underwater visibility. Five boots included.

Product Code: CABLE-2-5-STEREO

The CABLE-2-5-STEREO voltage input cable can be attached to a wide variety of loggers Hobo Data Loggers.