Other Sensors
Flexible Humidity Probe - 0628-0022
Product code: 0628-0022
Flexible humidity probe for measurements in inaccessible places. Can be used with testo 445 and 645 series of meters.
$2,353.00
AUD + GST
$2,588.30
AUD Inc. GST
Scatter Field Moisture Probe - 0636-6160
Product code: 0636-6160
Scatter field probe for fast and damage-free material moisture measurement, with probe cable 1.2 m, f or testo 635-1.
$752.00
AUD + GST
$827.20
AUD Inc. GST
Pressure Dewpoint Probe - 0636-9835
Product code: 0636-9835
Pressure dewpoint probe for measurements in compressed air systems.
$1,943.00
AUD + GST
$2,137.30
AUD Inc. GST
pHionics STs ORP (Redox) Sensor with 4-20mA output
Product code: STS2100S-025
The pHionics STs Series™ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring. -Measurement range: -1000 to +1000 mV oxidation-reduction potential (ORP). -Has a narrow diameter (1.9 cm), appropriate for groundwater monitoring applications.
$1,985.00
AUD + GST
$2,183.50
AUD Inc. GST
pHionics STs DO (Dissolved Oxygen) Sensor with 4-20mA
Product code: STS3020S-025
The pHionics STs Series Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required. -0 to 20 mg/L or 0 to 200% saturation depending on scaling with datalogger or RTU. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge).
$2,592.00
AUD + GST
$2,851.20
AUD Inc. GST
pHionics STs pH Sensor with 4 to 20mA output
Product code: STS1014S-025
The pHionics STs Series pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring. -19mm diameter probe while a durable, chemical-resistant housing. -4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge). -Suitable for groundwater monitoring, wastewater treatment, aquaculture, pollution control, and many others.
$1,883.00
AUD + GST
$2,071.30
AUD Inc. GST
pHionics STs Conductivity Sensor/Transmitter
Product code: IC-STS4XXXS-025
pHionics has combined a conductivity and temperature sensor with a 4-20 mA transmitter into a single, compact device that provides exceptional durability and accuracy. Different ranges are available under options. All models also include a 25 ft cable.
$2,329.00
AUD + GST
$2,561.90
AUD Inc. GST
IIG PSSL-20 Portable Suspend Solids Sensors (Low Range)
Product code: IC-IIG-PSSL-20
This Portable Suspended Solids sensor is more appropriate for lower ranges. It incorporates near infrared technology to provide increased dependability of the reading when color changes in the solids occur.
$2,165.00
AUD + GST
$2,381.50
AUD Inc. GST
IIG PSS-20 Portable Suspend Solids Sensors (Standard)
Product code: IC-IIG-PSS-20
The Portable Suspended Solids Standard sensor incorporate near infrared technology to provide increased dependability of the reading when color changes in the solids occur.
$2,165.00
AUD + GST
$2,381.50
AUD Inc. GST
WQ 300 pH Sensor Kit with 2m Cable (NIST)
Product code: IC-WQ300-PH-KIT-2M-NIST
WQ 300 PH Sensor Kit (NIST) for WQ series meters. Includes pH sensor head, pH sensor cartridge, one 60 ml pH 4.01 calibration solution, one 60 ml pH 6.86 calibration solution, and one 60 ml pH 9.18 calibration solution.
$670.00
AUD + GST
$737.00
AUD Inc. GST
Plug-in humidity/temperature probe - 0572-2151
Product code: 0572-2151
The 0572 2151 is a plug-in humidity/temperature probe is suitable for measuring temperature and relative humidity in storerooms, cold storage areas and work rooms or in air conditioning/ventilation ducts.
$188.00
AUD + GST
$206.80
AUD Inc. GST
Robust Humidity Probe - 0636-2161
Product code: 0636-2161
Temperature and humidity probe for use in refrigeration, air conditioning, air conditioning ducts, exhaust shafts and ventilation. Can be used with testo 635, 435-2 and testo 435-4. Measures material equilibrium moisture content when used with testo 635.
$1,223.00
AUD + GST
$1,345.30
AUD Inc. GST
Portable Dissolved Oxygen Sensor - IC-IIG PDO-20
Product code: IC-IIG-PDO-20
The Portable Dissolved Oxygen sensor incorporates optical fluorescent technology, solid state electronics, and a unique side mount element. The InsiteIG PDO sensor is the only portable optical DO sensor that does not require expensive replacement caps. Nitric Oxide does not interfere with the InsiteIG portable sensor.
$2,145.00
AUD + GST
$2,359.50
AUD Inc. GST
WQ 300 pH Sensor Kit with 5m Cable (USA)
Product code: IC-WQ300-PH-KIT-5M-USA
WQ 300 PH Sensor Kit (USA) for WQ series meters. Includes pH sensor head, pH sensor cartridge with 5m cable, one 60 ml pH 4 calibration solution, one 60 ml pH 7 calibration solution, and one 60 ml pH 10 calibration solution.
$815.00
AUD + GST
$896.50
AUD Inc. GST
WQ 300 pH Sensor Kit with 5m Cable (NIST)
Product code: IC-WQ300-PH-KIT-5M-NIST
WQ 300 PH Sensor Kit (NIST) for WQ series meters. Includes pH sensor head, pH sensor cartridge with 5m cable, one 60 ml pH 4.01 calibration solution, one 60 ml pH 6.86 calibration solution, and one 60 ml pH 9.18 calibration solution.
$815.00
AUD + GST
$896.50
AUD Inc. GST
WQ 300 pH Sensor Kit with 2m Cable (USA)
Product code: IC-WQ300-PH-KIT-2M-USA
WQ 300 PH Sensor Kit (USA) for WQ series meters. Includes pH sensor head, pH sensor cartridge, one 60 ml pH 4 calibration solution, one 60 ml pH 7 calibration solution, and one 60 ml pH 10 calibration solution.
$670.00
AUD + GST
$737.00
AUD Inc. GST
WQ 300 EC Sensor Kit with 5m Cable
Product code: IC-WQ-300-EC-KIT-5M
WQ 300 EC Sensor Kit for WQ series meters. Includes conductivity sensor head with 5 m cable, 4-Cell Conductivity sensor cartridge, one 60 ml 1413 uS/cm solution, one 60 ml 12.88 mS/cm solution, and one 60 ml 111.8 mS/cm solution.
$995.00
AUD + GST
$1,094.50
AUD Inc. GST
WQ 300 EC Sensor Kit with 2m Cable
Product code: IC-WQ-300-EC-KIT-2M
WQ 300 EC Sensor Kit for WQ series meters. Includes conductivity sensor head with 2 m cable, 4-Cell Conductivity sensor cartridge, one 60 ml 1413 uS/cm solution, one 60 ml 12.88 mS/cm solution, and one 60 ml 111.8 mS/cm solution.
$898.00
AUD + GST
$987.80
AUD Inc. GST
WQ 300 DO Sensor Kit with 5m Cable
Product code: IC-WQ-300-DO-KIT-5M
WQ 300 DO Sensor Kit for WQ series meters. Includes optical DO sensor head with 5 m cable, Do sensor cap, calibration bottle, and stainless steel DO sensor protective guard.
$1,525.00
AUD + GST
$1,677.50
AUD Inc. GST
WQ 300 DO Sensor Kit with 2m Cable
Product code: IC-WQ-300-DO-KIT-2M
WQ 300 DO Sensor Kit for WQ series meters. Includes optical DO sensor head with 2 m cable, Do sensor cap, calibration bottle, and stainless steel DO sensor protective guard.
$1,370.00
AUD + GST
$1,507.00
AUD Inc. GST
Temperature Sensor For GSM Controllers - IC-DS18B20
Product code: IC-DS18B20
This DS18B20 temperature sensor is an add-on accessory for our GSM controllers, see related products, that has temperature channel capacity. It has a temperature range of - 50 to ~ 125 C with an accuracy measurement of 0.5 C The sensor is built in a waterproof steel housing for outdoor or submersible monitoring.The 3-wire shielded cable is approximately 1 m in length and be extended up to 100 m. It is powered from the internal 5 VDC output terminal of the suitable GSM controller.
$79.00
AUD + GST
$86.90
AUD Inc. GST
5 in stock
Temp. & Humidity Sensor For GSM Controllers - IC-CHM-01A
Product code: IC-CHM-01A
This CHM-01A Temp. & Humidity sensor is an add-on accessory for our GSM controllers, see related products, that has humidity channel capacity. It has a humidity range of 0 to 100%RH with an accuracy measurement of +-5% The humidity sensor is intended for indoor monitoring. The 4-wire shielded cable is approximately 1 m in length and be extended up to 100 m. It is powered from the internal 5 VDC output terminal of the suitable GSM controller.
$174.00
AUD + GST
$191.40
AUD Inc. GST
Logtag probe plain
Product code: ST100S-15
This short tipped probe incorporates a 22mm exposed length of 5mm stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief. All materials at probe end of cable are FDA food rated including the cable. Supplied standard with 1.5m cable terminated to plug for plugging into the temperature recorder.
$45.00
AUD + GST
$49.50
AUD Inc. GST
2 in stock
High Accuracy External Temperature And Humidity Probe
Product code: IC-DT043
The DT043 is a highly accurate temperature and humidity probe. It measures relative humidity ranging from 0 to 100% with an error of not more than 1.5% RH over the entire range
$638.00
AUD + GST
$701.80
AUD Inc. GST
Connection cable, 1.5 meters long - IC-0430 0143
Product code: IC-0430-0143
Connection cable - Connection cable, 1.5 meters long for testo 645 probes
$116.00
AUD + GST
$127.60
AUD Inc. GST