Advanced Search
Instrument Choice 	Home

Environment Meters

Handheld and fixed instruments for testing the environment around you. Including wind meters, thermometers, sound meters, water quality testing systems and weather stations.

Sub Categories

Anemometers

Anemometers

Measure wind speed with vane, hot wire and cup anemometers.
Colorimeters

Colorimeters

Measure pH, Cyanuric Acid, Chlorine Dioxide, Ozone and Chlorine using colorimetry.
Conductivity, TDS, Salinity  Meters

Conductivity, TDS, Salinity Meters

Measure the salt content in liquids easily with handheld meters.
Dial-Analogue Thermometers

Dial-Analogue Thermometers

Highly visual dial style thermometers.
Dissolved Oxygen Meters

Dissolved Oxygen Meters

Measure the quantity of dissolved oxygen in liquids.
Gas Detectors

Gas Detectors

Monitor gas levels with handheld or permanent alarm systems.
Humidity Meters & Hygrometers

Humidity Meters & Hygrometers

Handheld and display meters for humidity, %RH along with temperature.
IR Thermometers

IR Thermometers

Non contact temperature instruments, point and shoot.
Light Meters

Light Meters

Measure light levels inside and outdoors (LUX, Lumens and UV).
Moisture Meters

Moisture Meters

Get simple measurements of wood, concrete, soil and more...
ORP Meters

ORP Meters

Meters to measure Oxidation reduction potential in liquids.
pH Meters

pH Meters

Hand held and bench meters to read pH easily.
Psychrometer

Psychrometer

Wet bulb, dew point and dry bulb temperature meters.
Sound Level Meters

Sound Level Meters

From basic dB meters to high quality equipment for safety checks and regulation audits.
Temperature Meters

Temperature Meters

Measure ambient, probe and outside temperature.
Thermal Cameras

Thermal Cameras

Infrared thermography, thermal imaging, and thermal video to get the whole temperature picture.
Turbidity Meters

Turbidity Meters

Measure total suspended solids easily and effectively.
Weather Stations

Weather Stations

Monitor weather conditions including wind speed, rain levels, temperature and humidity.

Products

Kestrel-4300 - Construction Weather Tracker

Kestrel-4300 - Construction Weather Tracker

Kestrel-4300 - Construction Weather Tracker

Manuals, Specifications & Datasheets

Construction Weather Tracker Kestrel-4300 - Construction Weather Tracker
Kestrel-4300 - Construction Weather Tracker
 
 

Product Description & Specifications

Improve results when doing surface coating and concrete pouring, andensure worker and equipment safety by knowing accurate local weatherconditions.

For years construction professionals have been using Kestrel Metersto monitor the weather on the job site. Now NK has partnered withindustry experts to develop a customized Kestrel instrument forconstruction professionals who place concrete.

Calculates Evaporation Rate

The new Kestrel 4300 Construction Weather Tracker measures anddisplays evaporation rate — a function of relative humidity,temperature and wind speed. Evaporation rate is a criticalenvironmental indicator that concrete contractors use to ensure theyavoid plastic shrinkage cracks in concrete installations especiallyconcrete flatwork. Plastic shrinkage cracks occur when the surface ofthe concrete dries too quickly and shrinks before the bed has curedenough to resist cracking. This is especially relevant in specialtyapplications like decorative concrete, Ready Mix Concrete (RCM) andTilt-up concrete.

Helps Prevent Plastic Shrinkage Cracks

Plastic shrinkage cracks can be prevented by properly assessing theweather and the fresh concrete conditions. Previously, constructioncontractors used a Kestrel Meter to measure the relevant conditions,then referenced an American Concrete Institute chart to calculate theevaporation rate. The new Kestrel 4300 Construction Weather Trackerdoes the work for them! The user simply enters the concrete temperature(obtained via an infrared thermometer or probe thermometer*) and the4300 calculates the evaporation rate instantly. In addition toevaporation rate, the Kestrel 4300 remains the perfect ruggedall-purpose construction weather tool, measuring and logging thefollowing relevant weather conditions right where the workers andequipment are operating.

For maximum accuracy when measuring the evaporation rate:
1. Measure the concrete temperature via an infrared or probe thermometer
2. Enter the concrete temperature into the Kestrel
3. Position the unit facing into the wind, 20 inches above the concrete
4. Shade the Kestrel's thermistor (temperature sensor) so it is not in direct sunlight

For the best accuracy, use the Kestrel's convenient averaging modeto average the evaporation rate over the recommended 6-10 seconds.

Learn More About Preventing Plastic Shrinkage Cracks. (ContentProvided by Luke Snell, Director of Concrete Industry Management, Del.E. Webb School of Construction, Arizona State University)

Documents Work Conditions

Many construction applications require documentation of conditions,which is quick and easy with the Kestrel PC Interface and accompanyingsoftware. Use the 4300's 1800 data-point log to document that work wasdone during the appropriate conditions, then upload the data to a PCwith the Kestrel PC Interface. The Kestrel Communicator software makeslong-term storage, in-depth analysis and detailed charting of storeddata a breeze.

Kestrel's Mini Tripod is a great companion for the 4300—it measures15 inches tall, positioning the Kestrel 4300 20 inches above theconcrete, which is ideal for measuring the conditions that contributeto plastic shrinkage cracks.

Every Kestrel is individually calibrated to NIST-traceable standardsand comes with a free Certificate of Conformity. Individual NISTcertificates and recalibration are also available.

Kestrel 4300 Measures

* Evaporation rate
* Relative humidity in %
* Wind speed (current, average, and maximum)
* Temperature in °F or °C
* Dewpoint
* Barometric pressure
* Heat stress index
* Wet bulb temperature
* Windchill
* Altitude
* Density altitude
 
Kestrel 4300 Features

* Waterproof and floats
* Backlight for low light conditions
* Data logger (automatic and manual)
* Customizable data storage – 1800 data points
* Multi-Function 3-line display
* Convenient averaging mode
* Data charting
* Humidity sensor can be recalibrated in the field with our Relative Humidity Calibration Kit.
* User-replaceable impeller
* Flip-top impeller cover
* Upload to a computer (with optional interface)
* Five languages (English, French, Spanish, German, and Italian)
* US Patent Nos. 5,783,753 and 5,939,645 and 6,257,074
* 5-year warranty
* Assembled in the USA

Kestrel 4300 Includes

* Soft carry pouch
* Wrist and neck lanyards
* Batteries – 2 AAA
* Kestrel Certificate of Conformity


Warranty: 5 Years