Product Description & Specifications
The I2C Bus Monitor Plus is our laboratory grade troubleshooting instrument for the Inter-Integrated Circuit (I2C) Bus, SMBus, and other derived protocols. When connected to an I2C or derived protocol bus and a host computer, the I2C Bus Monitor Plus captures, filters, and displays bus message data and timing information.
Download our free Demonstration/Viewer Software(Demo/Viewer)
PRODUCT HIGHLIGHTS
* Microsecond Timestamping of Bits, Bytes and Messages.
* Non-intrusive capture of bus traffic to 400KHz.
* Software controlled SCL and SDA Logic Voltage Levels.
* Display Filtering on message Slave Address, R/W, Ack/Nack, Data Bytes, and Smart Battery System protocol Violations.
If your designs include heavy I2C Bus, SMBus, or derived protocol content, the I2C Bus Monitor Plus will give you the bus monitoring power you need, including data timestamping, variable logic voltage thresholds, and flexible triggering. Whether you're testing designs with a single master and slave, such as programming configuration EEPROMs, or monitoring multiple masters and slaves in a server maintanence system, the information packed screens help you get your debug and verification done faster.
ADDITIONAL FEATURES
* I2C Bus, SMBus, SSI, and IPMI Development Tool.
* 256K byte Data Recording Memory.
* Supports General Calls, and Multi-Master/Multi-Slave Addressing.
* Displays Start/Stop Events, Device Addresses, Read/Write Requests, Acknowledgements, Data, and Bit, Byte, and Message timing.
* Trigger Input for synchronization with external events.
* Trigger Output on bus events or pattern match for triggering external test equipment.
TYPICAL APPLICATIONS
* Product Development: Software/Hardware Development, Testing, and Troubleshooting.
* Manufacturing: Manufacturing Tests, Inspection, Quality Control.
The I2C Bus Monitor Plus includes an extensive array of message monitoring capabilities, and can time-stamp bits, bytes, or messages.
The I2C Bus Monitor Plus can display Smart Battery Data in engineering units, and can detect, filter, and display protocol violations.
PRODUCT SPECIFICATIONS (Version 2)
PORTS
I2C Bus
A test cable provides connection to the network under test. Test clips are provided for:
SCL Clock Line (with Variable Threshold)
SDA Data Line (with Variable Threshold)
GND Ground Line
Target System VCC (Optional)
Trigger Input (BNC)
TTL signal input to synchronize data collection with external events.
Trigger Output (BNC)
TTL signal output to synchronize external equipment with I2C Bus Start, Stop, Ack, Nack;, and Bit Pattern matching events.
Utility Port (DB-9)
Use to attach optional external equipment in automatic test environments. Signals include:
SDA, SCL Input
SDA, SCL Output (TTL)
Trigger Input, Trigger Output (TTL)
INTERFACE OPTIONS
* MIIC-102/ISA - ISA interface.
* MIIC-102/PCI - PCI interface.
* MIIC-102/PCC - PC Card interface. (Not compatible with NT4.0)
Optional Add-On Interface kits available separately.
CONTROL SOFTWARE
The I2C Bus Monitor Plus includes an extensive array of message monitoring capabilities. These inlcude:
Display Options
I2C Bus Events (Start/Stop, R/W, Ack/Nack)
Bit, Byte, and Message Timing (uS)
Message Bit Rate (Bits/Sec)
Absolute or Relative Time Mesaurement
Protocols Supported
I2C Hex - Displays all data in hexadecimal.
I2C ASCII - Displays data in printable ASCII or hexadecimal.
SBS - Displays Smart Battery System (SBS V1.0, V1.1) data in engineering units with protocol revision selection (Host, Battery, Charger, and Selector) and violation detection.
Message Filtering
Bus activity can be monitored on a selective or non-selective basis. Filter displayed messages on Slave Address, up to 8 Data bytes, and SBS protocol violation only.
SDA/SCL Logic Threshold Control
Software controlled 0.7V to 2.5V.
Software Requirements
32-bit Windows (95/98/2000/ME/NT4.0/XP).
POWER
Includes 100-240VAC, 50-60Hz, Global AC Plug Set (#MWT-5VAG).
Included Parts List:
* I2C Bus Monitor Plus External Pod. (#MIIC-102)
* I2C Bus Monitor Plus Software for Windows (95/98/2000/ME/NT4.0/XP).
* Computer Interface Card (PCI, PC Card. or ISA).
* Computer Interface Cable.
* Interface Card Driver CD.
* I2C Bus Clip Lead Cable, 2 Ft. (#CABCL).
* I2C Interface Cable, 4 Ft. (#CAB4).
* BNC to Clip Lead Trigger Cable.
* Power Supply (#MWT-5VAG).
* User's Guide. (# MIIC-102-UG.pdf )
* FREE Technical Support (via phone, fax, or email)
Optional Add-On Parts
* Add-On Pod Interface Kits. Use a PCI interface in your lab. Get a PC Card Add-On for your laptop.
_ PCI Interface Kit (#MIIC-102/PCIH).
_ PC Card Interface Kit (#MIIC-102/PCCH).
_ ISA Interface Kit (#MIIC-102/ISAH).
* I2C Bus Monitor Plus Software Development Kit (#102-SDKW-VC).
* I2C ESD and Over-curent Protection Device (#IPROTX)
* I2C Interface Cable, 4, 8, 16 Ft. (#CAB4, CAB8, CAB16).
* 7 Port I2C Distribution Board. (#IP-202).
Product Environmental Specifications: See Environmental Specifications FAQ
